红外光谱法在测定矿物样品特征中的应用研究
|
摘要
本文对市面上比较具有代表性的几种优化处理方法处理出来的矿物样品进行了研究和比较,主要采用的研究方法为:矿物学基本性质测试、显微观察、红外测试。主要对不同样品中出现的异常成分进行分析比较,发现注胶、浸蜡矿物中均出现不同程度的有机吸收峰,这些与注入的材料相关,峰的强度也与注入材料深度和多少相关。
In this paper, several representative optimization methods are studied and compared. The main research methods are: basic mineralogical properties test, microscopic observation, infrared test. The abnormal components in different samples were analyzed and compared. It was found that there were organic absorption peaks in different degrees in the gelimpregnated and wax-impregnated minerals. These peaks were related to the injected materials, and the intensity of the peaks was also related to the depth and amount of the injected materials.
In this paper, several representative optimization methods are studied and compared. The main research methods are: basic mineralogical properties test, microscopic observation, infrared test. The abnormal components in different samples were analyzed and compared. It was found that there were organic absorption peaks in different degrees in the gelimpregnated and wax-impregnated minerals. These peaks were related to the injected materials, and the intensity of the peaks was also related to the depth and amount of the injected materials.
引文