新型动感座椅设备的仿真与制造
|
摘要
分析了一种新型的动感座椅设备,该设备采用1个三自由度平动并联机构作为动力输入,实现了3个座椅同步运动输出。首先在Solidworks软件中建立设备的三维模型,然后进行运动仿真分析并验证设备结构的合理性,最后绘制工程图加工并装配样机。试验证明新型动感座椅设备与市场上产品相比具有功能相同成本低廉的优点。
In this paper,a new type of moving platform device was analyzed,this new seat equipment used a three DOF parallel mechanism as power input,and realized 3 seats synchronous motion output. Firstly,the 3D model of equipment was established in Solid Works software. Secondly,the simulation analysis was carried out to verify the rationality of the device structure. At last,the engineering drawing was drew and the prototype was assembed. The test proved that the new type of moving platform device has the advantage of lower cost than the products in the market.
In this paper,a new type of moving platform device was analyzed,this new seat equipment used a three DOF parallel mechanism as power input,and realized 3 seats synchronous motion output. Firstly,the 3D model of equipment was established in Solid Works software. Secondly,the simulation analysis was carried out to verify the rationality of the device structure. At last,the engineering drawing was drew and the prototype was assembed. The test proved that the new type of moving platform device has the advantage of lower cost than the products in the market.
引文
[1]仲明.改进型3-RPS并联机构的设计与研究[D].哈尔滨:哈尔滨工业大学,2013.
[2]高峰,黄玉美,史文浩,等.3-RPS并联机构工作空间分析的球坐标搜索法[J].西安理工大学学报,2001,17(3):239-242.
[3]周正,吴昌林,陶卫军,等.基于Open GL的三自由度并联机器人三维运动仿真系统[J].机床与液压,2004(1):63-64.
[4]王旭明.动感影院系统研究与设计[D].武汉:华中科技大学,2013.
[5]霍电辉.新型三自由度动感模拟平台的研发[D].太原:太原科技大学机械电子工程,2013.
[6]王红州.三平动输入多重3-RPS机构输出的4D特效座椅[P].中国:ZL201410319373.5.2016-01-20.
[2]高峰,黄玉美,史文浩,等.3-RPS并联机构工作空间分析的球坐标搜索法[J].西安理工大学学报,2001,17(3):239-242.
[3]周正,吴昌林,陶卫军,等.基于Open GL的三自由度并联机器人三维运动仿真系统[J].机床与液压,2004(1):63-64.
[4]王旭明.动感影院系统研究与设计[D].武汉:华中科技大学,2013.
[5]霍电辉.新型三自由度动感模拟平台的研发[D].太原:太原科技大学机械电子工程,2013.
[6]王红州.三平动输入多重3-RPS机构输出的4D特效座椅[P].中国:ZL201410319373.5.2016-01-20.