摘要
从分析抽能电抗器高压绕组和抽能绕组特殊的电磁耦合关系和结构出发,应用硅钢叠片各向异性等建模方法,仿真分析了抽能电抗器空载、额定运行以及短路故障下的性能指标,并提出了改进措施。
Based on the analysis of the special electromagnetic coupling relation and structure of high-voltage winding and energy-extraction winding in energy-extraction reactor, the performance indexes of the energy-extraction reactor under no-load, rated operation and short-circuit fault are simulated and analyzed by using the modeling method of silicon steel sheet anisotropy. The improvement measures are put forward.
引文
[1]谢毓城.电力变压器手册第2版[M].北京:机械工业出版社,2014.
[2]白元强. 500kV抽能电抗器结构[J].江苏机电工程,2000,19(3):15-17.
[3]范荣全.有抽能绕组的500kV并联电抗器在开关站的应用[J].电网技术,2001, 25(11):77-79.
[4]李慧奇,崔翔,李琳,等.带抽能绕组并联铁心电抗器的分析[J].电工技术学报,2004, 19(12):15-19.
[5]李世雄. 500kV抽能并联电抗器在湖北鱼峡开关站的应用[J].湖北电力,2009, 33(z1):87-90.
[6]张进德,曾鹏,邓皓元,等. 500kV抽能并联电抗器-6kV所用变系统运行分析[J].湖北电力,2010, 34(5):36-38.
[7] Egawa T, Kyono M. Study of a shunt reactor withtransformer function[J]. IEEE Trans. on Magn., 1997,33(2):1235-1238.
[8]谭黎军,龚筱琦,苏钟焕. 500kV抽能并联电抗器空、负载特性研究[J].变压器,2015, 52(10):33-37.
[9]张栋,张俊杰.大型并联电抗器的电磁场综述及受力的仿真[J].变压器,2015, 52(10):19-25.
[10] Biro O, Preis K, Ticar I. A FEM method for eddycurrent analysis in laminated media[J]. COMPEL:TheInternational Journal for Computation and Mathematicsin Electrical and Electronic Engineering, 2005, 24(1):241-248.
[11] Biro O, Preis K, Richter K R. Various FEMformulations for the calculation of transient 3D eddycurrents in nonlinear media[J]. IEEE Trans. onMagn., 1995, 31(3):1307-1312.
[12]张俊杰.新型镜像法杂散损耗试验装置及电力变压器屏蔽的研究[D].北京:华北电力大学,2012.
[13]张俊杰,李琳,刘兰荣,等.进入硅钢叠片内的漏磁通和附加损耗的模拟实验与仿真[J].电工技术学报,2013,28(5):154-159.
[14] Shuichi N, Minoru K, Takaaki N, et al. Study ofmodeling method of lamination of reactor core[J].IEEE Trans. on Magn., 2006, 42(4):1455-1458.
[15] Nogawa S, Kuwata M, Miyagi D, et al. Study ofeddy-current loss reduction by slit in Reactor core[J].IEEE Trans. on Magn., 2005, 41(5):2024-2027.
[16]耿学斌.磁饱和电抗器最小输出电流的确定及最大输出电流的可靠获得[J].变压器,2017, 54(3):9-12.
[17]肖勋,李永新,吴红菊.数值计算方法在并联电抗器设计中的应用[J].变压器,2017, 54(7):1-4.
[18]赵春明,朱大铭,司昌健,等.匝间短路干式空心并联电抗器故障电流分析[J].变压器,2017, 54(9):34-38.