摘要
描述了电动缸在线调宽在宁钢2号连铸机板坯连铸上改造过程中,通过理论计算和试验相结合,对在线调宽的软夹紧压力进行精确计算,并该结果在使用中得到验证;通过建立间隙策略模型很好的消除了机械间隙对窄边锥度的影响;软件上开发了模拟调宽功能,能够在非浇钢时,提前预演调宽过程,大大降低了调宽试验风险和试验成本。
This paper describes The electric actuator on-line width adjustment control system on No.2 slab caster in Ningbo Iron & Steel Co.,Ltd. Based on theoretical calculation and experiment,get the precise calculation of the soft clamping pressure of on-line width adjustment control system,and proved in actual operation. The influence of mechanical clearance on narrow side taper is eliminated by establishing the gap strategy model. The software has developed a function of simulating width adjustment,which can simulate the whole process of width adjustment offline,greatly reduces the risk and cost of experiment.
引文
[1]刘明延,李平,栾兴家,等.板坯连铸机-设计与计算(上册)[M].1990:484.
[2]蔡开科.连铸结晶器[M].北京:国防工业出版社,1997.
[3]邓春栋.板坯连铸机结晶器的在线调宽[J].一重技术,2007(4):20.
[4]高琦,张小龙,杨拉道,等.结晶器热态调宽液压缸推力计算[J].铸造技术,2010,31(11):1464.
[5]马勤学.结晶器在线调宽技术及其应用[J].炼钢,1998(2):3.
[6]张树存.在线调宽装置在板坯连铸机结晶器上的应用[J].冶金设备,2006(155):30.
[7]周立宏.CSP结晶器在线调宽调锥液压故障分析与排除[J].液压与气动,2005(9):73.
[8]宋东飞.板坯连铸结晶器调宽控制系统[J].冶金自动化,2005(4):51.
[9]吴再华.结晶器在线液压调宽在炼钢厂连铸机上的应用[J].冶金自动化,2006年增刊(S1):468.
[10]周国强.在连铸振动运动轨迹装值模拟[J].连铸,2015,40(3):26.
[11]徐晓东.宁钢板坯连铸在线调宽控制系统[J].冶金自动化,2012(5):49.