摘要
通过对功率合成网络拓扑结构的理论分析,总结出合成效率与合成支路数N之间的关系,同时也分析了幅度相位对合成效率的影响,最后以波导功率分配/合成器为例,实现了Ka频段波导功率分配/合成器的设计,通过测试其性能指标均满足技术要求,此方法可应用于卫星通信功放模块设计中。
The topology of power comprise network had been analyzed in this paper, got the relationship between the combining efficiency and the number of amplifiers, and the effects of amplitude & phase on synthesis efficiency were analyzed. At last, the design of Ka-band waveguide power distributor/synthesizer was realized with the example of waveguide, after testing these indexes meet the requirements well,and this method can be applied to the satellite communication amplifier module.
引文
[1]陈明勇,窦文斌.Ka波段径向波导功率合成网络[J].电波科学学报,2010,25(04):745-748.
[2]王浩宇.微波宽带功率合成网络技术研究[D].电子科技大学,2017.
[3]邹梅颖.毫米波功率合成网络的设计[D].电子科技大学,2012.
[4]蔡德龙,刘成安,蔡钟斌,吕涛.超宽带威尔金森功分器的仿真研究[A].中国电子学会.2017年全国微波毫米波会议论文集(上册)[C].中国电子学会,2017:4.
[5]路鹏举,赵莉.基于混合环功分/功合网络宽带微波固态功率放大器的设计与实现[J].甘肃科技,2014,30(22):20-22+3.
[6]褚庆昕,康智勇,龚志.Ka波段波导二进制空间功率合成放大器[J].微波学报,2012,28(01):44-48.
[7]李骁,徐锐敏,詹铭周.一种基于T型波导的X波段宽带功率合成网络[J].微波学报,2014,30(S1):141-143.
[8]刘成帅,罗勇.基于3路功分器的Ka波段功率分配/合成的研究[J].电子元件与材料,2014,33(03):45-48.