农用车身双相钢板拉弯成形中的韧性断裂准则研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research on the criteria of ductile fracture in the bending of double phase steel plate for agricultural vehicle body 作者：赵连星 ; 赵泽明 ; 乔璐 ; 常绿 ; 李普前 ; 李迪 英文作者：Zhao Lianxing;Zhao Zeming;Qiao Lu;Chang Lv;Li Puqian;Li Di;Department of Automobile Engineering, Huaian College of Information Technology;Ministry of Agriculture Agricultural Machinery Testing and Evaluation Center;Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs;School of Transportation and Vehicle Engineering, Shandong University of Technology; 关键词：双相钢 ; 本构模型 ; 数值模拟 英文关键词：dual phase steel;;constitutive model;;numerical simulation 中文刊名：GLJH 英文刊名：Journal of Chinese Agricultural Mechanization 机构：淮安信息职业技术学院;农业农村部农业机械试验鉴定总站;农业农村部南京农业机械化研究所;山东理工大学交通与车辆工程学院; 出版日期：2019-04-15 出版单位：中国农机化学报 年：2019 期：v.40;No.302 基金：淮安信息职业技术学院青年基金(HXYQ2017005)——先进高强度双相钢车身板的冲压回弹研究 语种：中文; 页：GLJH201904022 页数：5 CN：04 ISSN：32-1837/S 分类号：127-131

摘要

由于农业机械车辆的轻量化,高强度双相钢大量用于农用车车身,为提高农业用车身双相钢板在拉弯成形中的成型性,提出一种参数利于标定且能准确预测农用车车身钢板DP780断裂的韧性断裂准则,通过建立其Hill'48本构模型,利用数值模拟单拉及剪切过程获得断裂极限阈值为0.16,试验验证该断裂准则在模具凸模圆角为15 mm时,钢板拉弯深度为32 mm,仿真结果和试验一致性较好。该研究可以提高冲压成形成功率,节约成本,未知参数易于标定,方便工程应用,有很好的工程应用价值。
        Due to the light weight of agricultural machinery and vehicles, high-strength dual-phase steel is used in a large number of agricultural vehicle bodies. In order to improve the molding of agricultural body dual-phase steel plates in bending, this paper proposes a parameter that is conducive to calibration and can accurately predict the DP780 fracture of agricultural vehicle body steel plates. By establishing its Hill'48 constitutive model, the threshold value of the fracture limit is 0.16 by numerical simulation of the single drawing and shear process. The experiment verifies that the fracture criterion has a bending depth of 32 mm when the circular angle of the mold is 15 mm. The simulation results and the experimental results are good. This study can improve the success rate of stamping, save cost, easy calibration of unknown parameters, and facilitate engineering application. It has a good engineering application value.

引文

[1] He Changwei,Xie Zhen,Zhang Zhe.Study on stamping formability and instability mechanism of 800MPa DP steel [J].Journal of Plasticity Engineering,2013,20(1):121-125.
    [2] 李梅,赵亦希,胡星,等.先进高强度双相钢汽车板剪切断裂实验[J].上海交通大学学报,2011,45(11):1695-1699.Li Mei,Zhao Yixi,Hu Xing,et al.Experimental study of shear fracture on advanced high strength dual-phase steels [J].Journal of Shanghai Jiaotong University,2011,45(11):1695-1699.
    [3] Luo M,Wierzbicki T.Numerical failure analysis of a stretch-bending test on dual-phase steel sheets using a phenomenological fracture model [J].International Journal of Solids and Structures,2010,47(22-23):3084-3102.
    [4] Hill R.A theory of the yielding and plastic flow of anisotropic metals [J].Proceedings of the Royal Society of London.Series A.Mathematical and Physical Sciences,1948,193(1033):281-297.
    [5] Rice J R,Tracey D M.On the ductile enlargement of voids in triaxial stress fields [J].Journal of the Mechanics and Physics of Solids,1969,17(3):201-217.
    [6] Rice J R,Tracey D M.On the ductile enlargement of voids in triaxial stress fields [J].Journal of the Mechanics and Physics of Solids,1969,17(3):201-217.
    [7] 苏维国,穆志韬,刘涛,等.基于损伤力学的金属材料韧性断裂失效分析[J].宇航材料工艺,2014,44(2):24-28.Sun Weiguo,Mu Zhitao,Liu Tao.Fracture failure analysis of metal ductile metals based on damage mechanism [J].Aerospace Materials & Technology,2014,44(2):24-28.
    [8] 黄建科.金属成形过程的细观损伤力学模型及韧性断裂准则研究[D].上海:上海交通大学,2009.Huang Jianke.Study on meso-damage model and ductilefracture criterion in metal forming processes [D].Shanghai:Shanghai Jiaotong University,2009.
    [9] Ruan Guangming.Technological parameters optimiza-tion of springback for DP800 high strength steel based on response surface method [J].Forging & Stamping Technology,2015,40(4):40-44.
    [10] 刘细芬,黄华艳.基于AutoForm的汽车覆盖件冲压成形仿真技术研究[J].中国农机化,2010(3):87-90.Liu Xifen,Huang Huayan.Research on simulation technology for auto panel stamping forming based on AutoForm [J].Chinese Agricultural Mechanization,2010(3):87-90.
    [11] 王大勇,秦东晨.基于弹塑性有限元法的拖拉机车轮疲劳寿命预测研究[J].中国农机化学报,2017,38(10):97-101,110.Wang Dayong,Qin Dongchen.Research on forecast of tractor wheels' fatigue life based on elasto-plastic FEM analysis [J].Journal of Chinese Agricultural Mechanization,2017,38(10):97-101,110.
    [12] 武正权,牛志刚.金属板料成形弯曲力算法及仿真分析[J].中国农机化学报,2015,36(4):45-47.Wu Zhengquan,Niu Zhigang.Algorithmand simulation analysis of bending force in shee tmetal forming processes [J].Journal of Chinese Agricultural Mechanization,2015,36(4):45-47.
    [13] 王壬炎,王时英.超声振动时效的机理及实验研究[J].中国农机化学报,2015,36(2):59-62.Wang Renyan,Wang Shiying.Mechanism analysis and experimental research of the ultrasonic vibration aging [J].Journal of Chinese Agricultural Mechanization,2015,36(2):59-62.
    [14] 刘昭.考虑摩擦力时受圆柱面约束弹性杆的平衡[J].中国农机化学报,2016,37(7):281-284.Liu Zhao.Considering the friction equiliberium of an elastic rod constrained to acylinder [J].Journal of Chinese Agricultural Mechanization,2016,37(7):281-284.
    [15] 李茗,张亚岐,成振坤.多工艺参数组合对回弹影响[J].中国农机化学报,2016,37(8):106-110.Li Ming,Zhang Yaqi,Cheng Zhenkun.Analysis on combined process parameters on spring back [J].Journal of Chinese Agricultural Mechanization,2016,37(8):106-110.