循环流化床脱硫塔流场结构优化数值模拟

详细信息    查看全文 | 推荐本文 |

英文篇名：Numerical Simulation on the Structure Optimization of the Flow Field in Acirculating Fluidized Bed Desulfurization Tower 作者：吴晅 ; 梁盼龙 ; 于萌 ; 刘卫 英文作者：WU Xuan;LIANG Pan-long;YU Meng;LIU Wei;School of Energy and Environment,Inner Mongolia University of Science and Technology; 关键词：循环流化床脱硫塔 ; 气相流动 ; 数值模拟 ; 优化方案 英文关键词：Circulating Fluidized Bed desulfurization tower;;gas phase flow;;numerical simulation;;optimization scheme 中文刊名：GLJS 英文刊名：Boiler Technology 机构：内蒙古科技大学能源与环境学院; 出版日期：2016-03-28 出版单位：锅炉技术 年：2016 期：v.47;No.473 基金：国家自然科学基金资助项目(51166010);; 内蒙古科技大学少数民族大学生科技创新基金(2014130) 语种：中文; 页：GLJS201602010 页数：7 CN：02 ISSN：31-1508/TK 分类号：48-54

摘要

按照循环流化床脱硫塔的实际尺寸和工作指数,利用数值模拟软件Fluent,模拟其内部的气相流场,发现了脱硫塔内存在着流场不均匀性,并提出多种改造方案进行优化与比较。研究分析表明:改变文丘里管径,加装导流板(竖直导流板,斜导流板或弯曲导流板)能使流场内气流组织均匀;并对不同优化方案的利弊做了相应分析,最后确定加装竖直导流板为最优方案。
        According to the actual size and working index of the circulating fluidized bed desulfurization tower,the research used the numerical simulation software Fluent to simulate the interior gas phase flow field,and found that the flow field was non-uniformity in the desulfurization tower,then compared and analyzed a variety of optimization schemes.The research and analysis show that changing the diameter of the venturi tubes or the installation of guide plates including the vertical guide plates,inclined guide plates or bend guide plates can make air distribution uniform in the flow field.This article also analyzes the advantages and disadvantages of the different optimization schemes,and finally determines that the installation of vertical guide plates is the optimal solution.

引文

[1]GUO Weilin,HE Chao.Numerical simulation analysis of fluid in the semi-state within the desulphurization tower[J],Advanced Materials Research,2010,118:921-924.
    [2]颜岩,彭晓峰,王补宣.循环流化床内烟气脱硫模拟分析[J].中国电机工程学报,2003,23(11):173-177.
    [3]王志轩,潘荔.我国火电厂烟气脱硫产业化发展建议[J].环境科学研究,2005,18(4):51-54.
    [4]柳目.脱硫剂对循环流化床锅炉效率的影响[J].锅炉制造,2004(1):18-19.
    [5]温敬平,张志平,陈金玉.三相流化床除尘脱硫器性能的数值模拟研究[J].江苏大学学报,2004,25(4):349-352.
    [6]刘鸿,周克毅,徐啸虎,等.循环流化床炉内传热特性分析[J].中国电机工程学报,2004,24(6):211-213.
    [7]胡金榜,李艳平,陈安新,等.循环流化床脱硫反应器入口结构对气体流动影响数值模拟[J].化学工程,2005,33(1):20-23.
    [8]GONG Guozhuo,YE Shufeng.Characterization and modification of inlet configuration on gas flow in a circulating fluidized bed desulfurization reactor[J].Journal of China University of Mining and Technology,2010,39(1):104-108.
    [9]王福军.计算流体动力学分析[M].北京:清华大学出版社,2004.