摘要
本文对某炼钢厂直弧型连铸机结晶器宽面夹紧装置出现的事故进行了深入分析,对其设计及工作原理进行了研究,结合现场具体工况进行了分析和计算,准确调整了结晶器宽面铜板处夹紧装置的预紧力,较好地解决了浇钢过程中结晶器铜板过载打开的故障,避免产生结晶器接缝超标及跑锥等问题,保证生产的正常运行。
In this paper, the accident of wide-face clamping device of Mould of straight arc continuous caster in a steelmaking plant has been analyzed in depth, and its the design and working principle are studied, combined with the site condition is analyzed and calculated,accurate adjustment of the Mould width copper clamping device pre-tightening force, better solved in the process of casting steel mold copper plate overload failure to open, avoid the problems of over standard joint and taper running, and ensure the normal operation of production.
引文
[1]闫开宇,孙健.结晶器夹紧装置设计方案研究[J].一重技术,2007,(3).
[2]周卓锁,张传令,李井锋,程瑞宾.板坯连铸机结晶器跑锥的改进[J].河北冶金,2009,(4).
[3]李宗军,张玉镜.唐钢1700板坯连铸机结晶器跑锥度的原因与解决措施[J].科技资讯,2009,(2).
[4]郭玉山.结晶器调宽控制系统在连铸机中的应用[J].科技信息(科学教研),2008,(15).
[5]周立宏.CSP结晶器在线调宽调锥液压故障分析与排除[J].液压与气动,2005,(9).
[6]刘明延,李平.板坯连铸机设计与计算[J].北京:机械工业出版社,1990.