溅射Ti涂层的Mg-7Y-2.5Zn-2Si/Al合金电化学腐蚀行为研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Sputtered Ti Coating Study on the Electrochemical Corrosion Behavior of Mg-7Y-2.5Zn-2Si/Al Alloy 作者：杨龙飞 ; 付广艳 ; 姬森 ; 李洪泽 英文作者：YANG Long-fei;FU Guang-yan;JI Sen;LI Hong-ze;Shenyang University of Chemical Technology; 关键词：磷化 ; 钛涂层 ; 电化学腐蚀 ; 镁合金 英文关键词：phosphating;;Ti coating;;electrochemical corrosion;;magnesium alloy 中文刊名：SYHY 英文刊名：Journal of Shenyang University of Chemical Technology 机构：沈阳化工大学机械工程学院; 出版日期：2019-03-15 出版单位：沈阳化工大学学报 年：2019 期：v.33;No.128 基金：大学生创新创业训练计划(201610149020) 语种：中文; 页：SYHY201901015 页数：4 CN：01 ISSN：21-1577/TQ 分类号：85-88

摘要

为提高镁合金耐电化学腐蚀性能,研究磷化溅射Ti涂层的Mg-7Y-2.5Zn-2Al和Mg-7Y-2.5Zn-2Si两种镁合金在质量分数为3. 5%的NaCl溶液中的电化学腐蚀性能.对两种试样进行电化学腐蚀试验,腐蚀后用扫描电镜(SEM)观测镁合金表面形貌,以及使用维氏硬度计对腐蚀后的镁合金进行硬度分析.磷化后溅射Ti涂层镁合金的电化学实验结果表明:含Si镁合金比含Al镁合金腐蚀膜更加稳定紧凑,通过磷化后溅射Ti涂层工艺处理后的镁合金的腐蚀膜与基体的连接性能较好,耐蚀效果提高较为显著.
        In order to improve the electro-chemical corrosion resistance of magnesium alloys, the electrochemical corrosion resistance of Mg-7Y-2.5Zn-2Al and Mg-7Y-2.5Zn-2Si coatings deposited by phosphating sputtering in NaCl solution was studied. Two kinds of samples were tested for electrochemical corrosion.After corrosion, the surface morphology of magnesium alloy was observed by scanning electron microscopy( SEM),and the hardness of corroded magnesium alloy was analyzed by Vickers hardness tester.The electrochemical experimental results of sputted Ti-coated magnesium alloy after phosphating show that the corrosion film of Si-containing magnesium alloys is more stable and compact than that of Al-containing magnesium alloys. The corrosion film of magnesium alloys treated by sputtered Ti-coated after phosphating has better connection performance with the matrix,and the corrosion resistance is improved remarkably.

引文

[1]陈虎.镁合金的研究及其在汽车轻量化中的应用[J].企业技术开发,2009,28:17-19.
    [2]杜文博,吴玉锋,左铁镛.镁合金在交通工具中的应用现状[J].世界有色金属,2006(2):19-21.
    [3]金华兰,危仁杰,杨湘杰.ZM5镁合金的化学表面处理[J].轻合金加工技术,2004,32(10):27-30.
    [4]王亚明,王福会,欧阳家虎,等.AZ91镁合金表面含Ti生物复合涂层结构及腐蚀学性能[J].稀有金属材料与工程,2010,38(增刊2):739-742.
    [5]兰伟,周安若,孙建春,等.镁合金表面磷酸盐转化膜研究[J].金属热处理,2007,32(6):66-68.
    [6]李卫平,朱立群.镁及其合金表面防护性涂层国内外研究进展[J].材料保护,2005,38(2):41-46.
    [7]陈祥,金华兰,杨湘杰,等.镁合金磷酸盐、锡酸盐化学转化工艺及膜层耐蚀性研究[J].材料保护,2008,41(8):22-24.
    [8]GARY J E,LUAN B.Protective Coatings on Magnesium and Its Alloys-a Critical Review[J].Journal of Alloys and Compounds,2002,336(1):88-113.
    [9]YONG Z Y,ZHU J,QIU C,et al.Molybdate/Phosphate Composite Conversion Coating on Magnesium Alloy Surface for Corrosion Protection[J].Applied Surface Science,2008,255(5):1672-1680.
    [10]WU G S,ZENG X Q,YAO S S,et al.Formation of a Novel Nanocrystalline Coating on AZ31 Magnesium Alloy by Bias Sputtering[J].Materials Letters,2007,61:4019-4022.