柔性制造单元生产性能仿真研究
|
摘要
柔性制造单元的特点是智能化与集成化,物料在单元中的搬运、加工完全自动化,基于柔性制造单元的背景,采用e M-Plant搭建了仿真模型,通过对10种布局方案进行了仿真验证以及对比分析,提出基于物流量、空载行程和产出率等生产指标的评价方法,对这些指标评价方法进行显著性分析,最终获得了生产指标较优的布局方案。
The flexible manufacturing cell was characterized by intelligence and integration,and the handling and processing of materials in the cell was fully automated. Based on the background of flexible manufacturing cell, a simulation model was built by using e M-Plant. Through the simulation verification and comparative analysis of ten layouts, some evaluation methods based on the production indexes such as logistics volume, no-load travel and output rate were put forward. The significance and correlation of the evaluation results were analyzed, and the optimal layout was obtained.
The flexible manufacturing cell was characterized by intelligence and integration,and the handling and processing of materials in the cell was fully automated. Based on the background of flexible manufacturing cell, a simulation model was built by using e M-Plant. Through the simulation verification and comparative analysis of ten layouts, some evaluation methods based on the production indexes such as logistics volume, no-load travel and output rate were put forward. The significance and correlation of the evaluation results were analyzed, and the optimal layout was obtained.
引文
[1]赵琼卓,陈庆新.模具制造系统布局方式的仿真评价[D].广州:广东工业大学,2012:40-43.
[2]安迪.基于SLP和Flexsim的发电车间布局研究与评价[D].兰州:兰州理工大学,2016:56-72.
[3]AMIT N,SUHADAK N,JOHARI N,et al.Using simulation to solve facility layout for food industry at XYZ company[C].Humanities,Science&Engineering Research,2012:647-652.
[4]SADRZADEH A.A genetic algorithm with the heuristic procedure to solve the multi-line layout problem[J].Computers&Industrial Engineering,2012,6(4):1055-1064.
[5]许宇宁,陈庆新,毛宁.具有储运单元的柔性流水车间性能分析方法[J].计算机集成制造系统,2016,22(3):764-773.
[6]刘建军,陈庆新,毛宁.带分段环形路径AGV的制造系统排队网建模与分析[J].工业工程,2017,20(1):83-90.
[7]李翔,陈庆新,毛宁,等.多级流水线车间缓存设置参数仿真优化[J].模具工业,2012,38(7):1-6.
[2]安迪.基于SLP和Flexsim的发电车间布局研究与评价[D].兰州:兰州理工大学,2016:56-72.
[3]AMIT N,SUHADAK N,JOHARI N,et al.Using simulation to solve facility layout for food industry at XYZ company[C].Humanities,Science&Engineering Research,2012:647-652.
[4]SADRZADEH A.A genetic algorithm with the heuristic procedure to solve the multi-line layout problem[J].Computers&Industrial Engineering,2012,6(4):1055-1064.
[5]许宇宁,陈庆新,毛宁.具有储运单元的柔性流水车间性能分析方法[J].计算机集成制造系统,2016,22(3):764-773.
[6]刘建军,陈庆新,毛宁.带分段环形路径AGV的制造系统排队网建模与分析[J].工业工程,2017,20(1):83-90.
[7]李翔,陈庆新,毛宁,等.多级流水线车间缓存设置参数仿真优化[J].模具工业,2012,38(7):1-6.