摘要
通过将铸钢缺陷试验件超声检测结果与MAGMASOFT软件模拟结果对比,发现一定量的中心致密度和一定量体积的缺陷与实际缺陷检测等级的定量对应关系,为铸造工艺设计提供可参考的定量判据。并通过比较实际外冷与模拟外冷的效果,调整了模拟边界条件,使得模拟与实际更吻合。
By comparing ultrasonic test results and MAGMASOFT simulation results about specimens with defects of steel castings,the corresponding relationship between fix quantity center compactness and fix quantity volume of defects and fix quantity of real defects inspection level has been established,which provided favorable quantitation evaluation basis for casting process design,furthermore by contrasting true outer cooling effect with simulated outer cooling effect,simulated boundary condition has been adjusted to match the simulated condition with the actual condition better.
引文
[1]王春乐.铸钢件缩孔缩松预测方法及判据浅析[J].山西机械,2003(4):8-10.
[2]宋新华.铸钢件凝固过程数值模拟的通用边界条件[J].沈阳工业大学学报,1986.
[3]赵凯阳,凌正忠,徐慧,等.基于MAGMASOFT 5. 3铸造仿真软件的铸件缺陷评估方法研究[A].重庆市铸造论文集,2017.