用户名: 密码: 验证码:
我国大跨径桥梁钢箱梁的养护技术发展及展望
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:DEVELOPMENT AND PROSPECT OF MAINTENANCE TECHNIQUES FOR THE STEEL BOX GIRDER OF LONG-SPAN BRIDGES IN CHINA
  • 作者:吉伯海 ; 傅中秋 ; 王秋东 ; 袁周致远
  • 英文作者:JI Bohai;FU Zhongqiu;WANG Qiudong;YUAN Zhouzhiyuan;College of Civil and Transportation Engineering,Hohai University;
  • 关键词:钢箱梁 ; 病害 ; 养护 ; 发展现状 ; 展望
  • 英文关键词:steel box girder;;disease;;maintenance;;state of the art;;expectation
  • 中文刊名:GYJZ
  • 英文刊名:Industrial Construction
  • 机构:河海大学土木与交通学院;
  • 出版日期:2018-10-20
  • 出版单位:工业建筑
  • 年:2018
  • 期:v.48;No.549
  • 语种:中文;
  • 页:GYJZ201810001
  • 页数:9
  • CN:10
  • ISSN:11-2068/TU
  • 分类号:6-14
摘要
基于我国大跨径桥梁钢箱梁的日常养护工作,通过总结现阶段常见的钢箱梁典型病害,分析了钢箱梁养护工作的特殊性,在阐述钢箱梁养护体系的发展历程的基础上,介绍了钢箱梁防腐、焊缝检查、焊缝维护等工作中常用的技术手段。在此基础上,针对当前钢箱梁养护工作中存在的不足及面临的难题,对钢箱梁管养工作的发展提出了建议。
        Based on the daily maintenance work of steel box girder of long-span bridges in China,the characteristic diseases commonly detected in steel box girder were summarized. The particularity of the maintenance work of steel box girder was analyzed,and the development course of the maintenance system was reviewed. Besides,the common technical means relative to the anticorrosion of steel box girder,detection and maintenance of welds were discussed.On this basis,the expectations and suggestions about the development of maintenance work were put forward based on the deficiencies and difficulties existed in the current maintenance work of steel box girder.
引文
[1]吉伯海,袁周致远.钢箱梁疲劳开裂维护研究现状[J].工业建筑,2017,47(5):1-5.
    [2]吉伯海.我国缆索支承桥梁钢箱梁疲劳损伤研究现状[J].河海大学学报(自然科学版),2014,42(5):410-415.
    [3]马建,孙守增,杨琦,等.中国桥梁工程学术研究综述·2014[J].中国公路学报,2014,27(5):1-96.
    [4]吉伯海,赵端端,姜竹生,等.钢箱梁腐蚀病害综合评分制评定方法[J].世界桥梁,2013,41(6):81-85.
    [5]JEONG Y S,KAINUMA S,AHN J H.Structural Response of Orthotropic Bridge Deck Depending on the Corroded Deck Surface[J].Construction&Building Materials,2013,43(3):87-97.
    [6]姜竹生,瞿涛,吕磊,等.钢箱梁典型病害分析及其检测与维护技术研究[J].防灾减灾工程学报,2011,31(5):108-113.
    [7]PFEIL M S,BATTISTA R C,MERGULHAO A J R.Stress Concentration in Steel Bridge Orthotropic Decks[J].Journal of Constructional Steel Research,2005,61(8):1172-1184.
    [8]KAINUMA S,JEONG Y S,YANG M,et al.Welding Residual Stress in Roots Between Deck Plate and U-Rib in Orthotropic Steel Decks[J].Measurement,2016,92:475-482.
    [9]JI B H,CHEN D H,MA L,et al.Research on Stress Spectrum of Steel Decks in Suspension Bridge Considering Measured Traffic Flow[J].Journal of Performance of Constructed Facilities,2012,26(1):65-75.
    [10]LI M,HASHIMOTO K,SUGIURA K.Influence of Asphalt Surfacing on Fatigue Evaluation of Rib-to-Deck Joints in Orthotropic Steel Bridge Decks[J].Journal of Bridge Engineering,2014,19(10).doi:10.1061/(ASCE)BE.1943-5592.0000610.
    [11]SHAO X,YI D,HUANG Z,et al.Basic Performance of the Composite Deck System Composed of Orthotropic Steel Deck and Ultrathin RPC Layer[J].Journal of Bridge Engineering,2013,18(5):417-428.
    [12]FU Z Q,JI B H,XIE S H,et al.Crack Stop Holes in Steel Bridge Decks:Drilling Method and Effects[J].Journal of Central South University,2017,24(10):2372-2381.
    [13]谢曙辉,吉伯海,傅中秋,等.钢桥面板疲劳裂纹钻孔止裂分析及实验验证[J].河南大学学报(自然版),2016,46(6):732-738.
    [14]FU Z Q,WANG Q D,JI B H,et al.Rewelding Repair Effects on Fatigue Cracks in Steel Bridge Deck Welds[J].Journal of Performance of Constructed Facilities,2017,31(6).doi:10.1061/(ASCE)CF.1943-5509.0001083.
    [15]王秋东,吉伯海,孔祥明,等.钢桥面板顶板-U肋焊缝开裂钢板补强维护效果研究[J].工业建筑,2017,47(5):42-46.
    [16]AOKI Y,ISHIKAWA T,KAWANO H,et al.Proposition of OneSided Plate Bonding Method for Repairing Corroded Orthotropic Steel Deck Plate[J].Journal of Japan Society of Civil Engineers Ser A1,2016,72(1):263-278.
    [17]ISHIKAWA T,SHIMIZU M,TOMO H,et al.Effect of Compression Overload on Fatigue Strength Improved by ICRTreatment[J].International Journal of Steel Structures,2013,13(1):175-181.
    [18]YAMADA K,ISHIKAWA T,KAKIICHI T.Rehabilitation and Improvement of Fatigue Life of Welded Joints by ICR Treatment[J].Advanced Steel Construction,2015,11(3):294-304.
    [19]袁周致远,吉伯海,傅中秋,等.钢箱梁顶板与竖向加劲肋疲劳裂纹的冲击裂缝闭合修复试验研究[J].工业建筑,2017,47(5):27-31.
    [20]YUAN Z Z Y,JI B H,FU Z Q,et al.Fatigue Performance of Cracked Rib-Deck Welded Joint Retrofitted by ICR Technique[J].International Journal of Steel Structures,2016,16(3):735-742.
    [21]ZHAO J,XU J.Research on the Maintenance Decision-Making of Cement Concrete Pavement Based on Preventive Maintenance[C]//IEEE International Conference on E-Business Engineering.IEEE Computer Society,2009:497-498.
    [22]HU G,LI J.Preventive Maintenance Condition Standards of Expressway Asphalt Pavement[C]//International Conference on Intelligent Computation Technology and Automation.IEEE,2009:665-668.
    [23]FU Z Q,JI B H,KONG X,et al.Grinding Treatment Effect on Rib-to-Roof Weld Fatigue Performance of Steel Bridge Decks[J].Journal of Constructional Steel Research,2017,129:163-170.
    [24]YUAN Z Z Y,JI B H,FU Z Q,et al.Local Stress Variation in Welded Joints by ICR Treatment[J].Journal of Constructional Steel Research,2016,120:45-51.
    [25]王秋东,吉伯海,傅中秋,等.钢箱梁横隔板焊缝疲劳性能的锤击效果研究[J].安徽理工大学学报(自然科学版),2017,37(6):15-20.
    [26]陈继松,于群力,胡琦忠.跨海桥梁全寿命周期可靠性管理框架[J].世界桥梁,2008(3):71-74.
    [27]LESIUK G,SZATA M.Aspects of Structural Degradation in Steels of Old Bridges by Means of Fatigue Crack Propagation[J].Materials Science,2011,47(1):82-88.
    [28]张丽芳,艾军,张鹏飞,等.大跨度钢箱梁病害及成因分析[J].公路与汽运,2013(3):203-206.
    [29]吉伯海,朱伟,傅中秋,等.考虑多因素影响的钢箱梁病害评定方法[C]//中国公路学会桥梁和结构工程分会2013年全国桥梁学术会议论文集.2013.
    [30]李敏风.杨浦大桥等钢箱梁涂层大修工艺总结及建议[J].上海涂料,2011(5):25-27.
    [31]李芳.北大桥钢结构桥梁腐蚀防护[J].全面腐蚀控制,2005,19(3):42-44.
    [32]郦智斌,董彩常,张波.海湾大桥钢箱梁外表面涂层体系防腐蚀寿命分析[J].腐蚀与防护,2012,33(5):441-443.
    [33]刘涛,艾军,张丽芳,等.基于图像处理技术的钢箱梁防腐涂层寿命预测实验研究[J].中国腐蚀与防护学报,2013,33(5):407-412.
    [34]SHARIFI Y.Reliability of Deteriorating Steel Box-Girder Bridges Under Pitting Corrosion[J].Advanced Steel Construction,2011,7(3):220-238.
    [35]SHARIFI Y,PAIK J K.Environmental Effects on Ultimate Strength Reliability of Corroded Steel Box Girder Bridges[J].Thin-Walled Structures,2009,18(1):157-166.
    [36]SHARIFI Y,RAHGOZAR R.Fatigue Notch Factor in Steel Bridges Due to Corrosion[J].Archives of Civil&Mechanical Engineering,2009,9(4):75-83.
    [37]刘海龙.锈蚀中等跨径钢箱梁承载力研究[D].南京:江苏科技大学,2016.
    [38]韩晓东.腐蚀环境下节段式钢箱梁的疲劳性能研究[D].南京:南京航空航天大学,2015.
    [39]郭春华,任伟平.焊接钢桥结构细节疲劳裂纹成因及解决对策[J].铁道建筑,2011(4):18-21.
    [40]FISHER J W,STATNIKOV E,TEHINI L.Fatigue Strength Enhancement by Means of Weld Design Change and the Application of Ultrasonic Impact Treatment[J].Clinical Psychologicalence,2001,3(4):607-618.
    [41]FISHER J W,YEN B T,FRANK K H.Minimizing Fatigue and Fracture in Steel Bridges[J].Journal of Engineering Materials&Technology,1980,102(1):20-25.
    [42]FISHER J W,MERTZ D R.Fatigue Cracking in Longer Span Bridges[J].Annals of the New York Academy of Sciences,2010,352(1):193-217.
    [43]钟炜辉.钢结构的高周疲劳损伤有限元分析模型研究[D].西安:西安建筑科技大学,2005.
    [44]连恒亮.钢箱梁纵隔板疲劳裂纹分析[J].钢结构,2014,29(8):18-20.
    [45]刘中祥.大跨钢桥疲劳裂纹扩展的数值模拟研究[D].南京:东南大学,2015.
    [46]何江.超大跨径斜拉桥钢结构疲劳监测与评估[J].城市道桥与防洪,2013(7):209-213.
    [47]金正凯.正交异性钢桥面板顶板与纵肋连接焊缝疲劳裂纹数值模拟方法[D].成都:西南交通大学,2017.
    [48]王本劲,BACKER H,陈艾荣.正交异性钢桥面板裂纹扩展的均质化方法[J].中国公路学报,2017(3):113-120.
    [49]李立峰,张东波,袁卓亚,等.正交异性钢桥面板中弧形缺口的受力分析[J].公路交通科技,2012(4):55-61.
    [50]张玉玲,辛学忠,刘晓光.对正交异性钢桥面板构造抗疲劳设计方法的分析[J].钢结构,2009,24(5):33-37.
    [51]张允士,李法雄,熊锋,等.正交异性钢桥面板疲劳裂纹成因分析及控制[J].公路交通科技,2013(8):75-80.
    [52]武峰,张冀蜀,蔡贤桢.武汉阳逻长江公路大桥钢箱梁防腐涂装[J].桥梁建设,2008(3):63-66.
    [53]张建平.广州珠江黄埔大桥钢箱梁涂装技术及质量控制[J].桥梁建设,2009(5):78-80.
    [54]王光星,盖国晖,万莹莹.青岛海湾大桥航道桥钢箱梁防腐涂装[J].公路,2009(9):199-200.
    [55]陈雄飞,樊叶华.大跨径桥梁钢箱梁结构的二次防腐涂装新技术[C]//中国高速公路管理学术论文集.2010.
    [56]朱能,田喆,刘斌.跨海大桥除湿系统研究[J].天津大学学报(自然科学与工程技术版),2004,37(8):728-732.
    [57]宋平丽.基于视频图像的桥梁裂缝检测[D].武汉:武汉理工大学,2010.
    [58]TONG X,GUO J,LING Y,et al.A New Image-Based Method for Concrete Bridge Bottom Crack Detection[C]//International Conference on Image Analysis and Signal Processing.IEEE,2011:568-571.
    [59]许薛军,张肖宁.基于数字图像的混凝土桥梁裂缝检测技术[J].湖南大学学报(自然科学版),2013,40(7):34-40.
    [60]TUNG P C,HWANG Y R,WU M C.The Development of a Mobile Manipulator Imaging System for Bridge Crack Inspection[J].Automation in Construction,2002,11(6):717-729.
    [61]中国国家标准化管理委员会.无损检测磁粉检测第3部分-设备:GB/T 15822.3-2016[S].北京:中国标准出版社,2005.
    [62]中国建设部建筑制品与构配件产品标准化技术委员会.钢结构超声波探伤及质量分级法:JG/T 203-2007[S].北京:中国标准出版社,2007.
    [63]XIE F X,JI B H,YUAN Z Z Y,et al.Ultrasonic Detecting Method and Repair Technology Based on Fatigue Crack Features in Steel Box Girder[J].Journal of Performance of Constructed Facilities,2016,30(2).doi:10.1061/(ASCE)CF.1943-5509.0000725.
    [64]王问笔.U肋构造及横隔板开孔形式对正交异性钢桥面板疲劳性能的影响[D].成都:西南交通大学,2015.
    [65]王荣,杨峰,顾晓波.超声冲击改善焊接接头残余应力的研究[J].江苏科技大学学报(自然科学版),2009,23(4):304-307.
    [66]马立芬,庞延波.钢桥梁U肋角焊缝全熔透焊接工艺[J].焊接技术,2017(6):41-43.
    [67]PING G U,PEI H,BO S,et al.Fatigue Performance of Orthotropic Steel Bridge Decks with Inner Diaphragm in U-Rib[J].Journal of Tongji University,2014,42(10):1499-1504.
    [68]FU Z Q,JI B H,WANG Y X,et al.Fatigue Performance of the U-Rib and Roof Weld in Steel Bridge Decks with Corner Braces[J].Steel and Composite Structures,2018,26(1):103-113.
    [69]LIU J,GUO T,FENG D M,et al.Investigation on Fatigue Performance of Rib-to-Deck Joints Strengthened with FRP Angles[J].Journal of Bridge Engineering,2018,23(9).doi:10.1061/(ASCE)BE.1943-5592.0001286.
    [70]TAI M M,MIKI C.Improvement Effects of Fatigue Strength by Burr Grinding and Hammer Peening Under Variable Amplitude Loading[J].Welding in the World,2012,56(7/8):109-117.
    [71]钢结构加固技术规范:CECS 77∶96[S].,1996.
    [72]YUAN Z Z Y,JI B H,FU Z Q,et al.Retarding Effects on Crack Propagation by Closing Crack Surface Using ICR Treatment[J].Journal of Constructional Steel Research,2018,143:11-17.
    [73]YUAN Z Z Y,JI B H,FU Z Q,et al.Local Stress Variation in Welded Joints by ICR Treatment[J].Journal of Constructional Steel Research,2016,120:45-51.
    [74]国务院.国务院关于积极推进“互联网+”行动的指导意见[J].中华人民共和国国务院公报,2015,28(20):9.
    [75]刘颖,关昌余.全力建立现代化公路养护管理体系:解读《“十三五”公路养护管理发展纲要》[J].中国公路,2016(15):54-58.
    [76]PHILLIPS S B,AZHAR S,KHALFAN M M A.Application of BIM for Maintenance and Management of Academic Facilities in the USA:A Review[J].2016,2(1):67.
    [77]SONG J,ZHU J.Big Data Based Daily Maintenance and Inspection System of Bridges[R].IABSE,2016.
    [78]郭嘉文.国家“十三五”交通领域科技创新专项规划发布[J].广东交通,2017(3):33.
    [79]TONG G,LI A,LI J.Fatigue Life Prediction of Welded Joints in Orthotropic Steel Decks Considering Temperature Effect and Increasing Traffic Flow[J].Structural Health Monitoring,2008,7(3):189-202.
    [80]XIAO Z G,YAMADA K,YA S,et al.Stress Analyses and Fatigue Evaluation of Rib-to-Deck Joints in Steel Orthotropic Decks[J].International Journal of Fatigue,2008,30(8):1387-1397.
    [81]JI B H,LIU R,CHEN C,et al.Evaluation on Root-Deck Fatigue of Orthotropic Steel Bridge Deck[J].Journal of Constructional Steel Research,2013,90(5):174-183.
    [82]FU Z Q,JI B H,ZHANG C,et al.Experimental Study on the Fatigue Performance of Roof and U-Rib Welds of Orthotropic Steel Bridge Decks[J].KSCE Journal of Civil Engineering,2017(3):1-9.
    [83]FU Z Q,JI B H,ZHANG C,et al.Fatigue Performance of Roof and U-Rib Weld of Orthotropic Steel Bridge Deck with Different Penetration Rates[J].Journal of Bridge Engineering,2017,22(6).doi:10.1061/(ASCE)BE.1943-5592.0001036.
    [84]YA S,YAMADA K,SHIKAWA T.Fatigue Evaluation of Rib-toDeck Welded Joints of Orthotropic Steel Bridge Deck[J].Journal of Bridge Engineering,2013,18(5):492-499.
    [85]Brewer,KennethA.AASHTO Maintenance Manual for Roadways and Bridges[S].Washington,DC,American Association of State Highway and Transportation Officials.2007.
    [86]European Committee for Standardization.Eurocode 3:Design of steel structures.Part 1.9:Fatigue[S].2003.
    [87]鉄道総合技術研究所.鋼構造物補修·補強·改造の手引き[S].鉄道総合技術研究所,国分寺,1992.
    [88]中华人民共和国交通运输部.公路桥梁承载能力检测评定规程:JTG/T J21-2011[S].北京:人民交通出版社,2011.
    [89]中华人民共和国交通运输部.公路桥涵养护规范:JTG H11-2004[S].北京:人民交通出版社,2011.
    [90]江苏省质量技术监督局.大跨径悬索桥和斜拉桥养护规范:DB 32/T 1648-2010[S].北京:人民交通出版社,2010.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700