带强制分齿的齿轮滚轧成形数值模拟方法研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Numerical Method Study of Gear Rolling Process with Workpiece Drive System 作者：王宇 ; 马自勇 ; 罗远新 英文作者：WANG Yu;MA Zi-yong;LUO Yuan-xin;Chongqing University,The State Key Laboratory of Mechanical Transmission; 关键词：轴向滚轧 ; 等效模型 ; 材料流动 ; 滚轧实验 英文关键词：Rolling Process with Axial Infeed;;Equivalent Model;;Material Flow;;Rolling Experiment 中文刊名：JSYZ 英文刊名：Machinery Design & Manufacture 机构：重庆大学机械传动国家重点实验室; 出版日期：2019-06-08 出版单位：机械设计与制造 年：2019 基金：国家自然科学基金面上项目(51775062);; 机械传动国家重点实验室特色项目(SKLMT-ZZKT-2015T01) 语种：中文; 页：JSYZ2019S1003 页数：4 CN：S1 ISSN：21-1140/TH 分类号：15-18

摘要

齿轮滚轧是一种新型齿轮成形工艺,具有生产效率高、材料利用率高、轮齿机械性能好等优点。由于缺乏对带强制分齿的轴向滚轧工艺的研究,提出了带强制分齿的轴向滚轧工艺的数值模拟方法,并通过滚轧实验进行了验证。由于软件无法定义齿坯的主动旋转运动,推导了以轧轮公转代替齿坯自转的运动学模型,在有限元软件FORGE中建立了齿轮轴向滚轧有限元模型,从金属流动、应力分布等方面分析齿坯成形过程;最后,进行齿轮轴向滚轧实验,结果表明成形齿轮的齿形与数值模拟结果比较吻合,证明了运动学等效模型的正确性以及有限元方法的可行性。
        Rolling process with axial infeed is an advanced forming technology of gear,whichhas the advantages of high production efficiency,high material utilization rate and good mechanical performance of gear teeth. Due to the lack of the study on gear rolling process with workpiece drive system,a numerical method of spur gear rolling process with workpiece drive system is proposed in this paper,and rolling experiment is used to verify the method. Rotational motion of the workpiece is hard to be defined in software,thus a kinematic model,the workpiece rotation is replaced by the rolling tool revolution,is deduced,and the finite element model is also built in FORGE. The forming process of workpiece is analyzed from metal flow and stress distribution. Finally,the rolling experiment with axial infeed is done,and compared result shows that the experimental tooth profile is close to the numerical simulation result,which proves correctnessof kinematic model and feasibility of finite element method.

引文

[1]刘志奇,李旭东,李永堂.花键轴冷滚压成形的分齿条件[J].兰州理工大学报,2009(4):35-38.(Liu Zhi-qi,Li Xu-dong,Li Yong-tang.Qualification of tooth graduation for cold rolling formation of spline[J].Journal of Lanzhou University of Technology,2009(4):35-38.)
    [2]王静,刘静波,曹荣.国内外齿轮加工技术及设备[J].成都纺织高等专科学校学报,2001,18(3):27-29(Wang Jing,Liu Jing-bo,Cao Rong.The Comparison of cutting techniques and equipment at home and abroad[J].Journalof Chengdu Tex tile College,2001,18(3):27-29)
    [3]谢晋市.大模数直齿轮温冷复合精密成形工艺研究[D].合肥:合肥工业大学,2012:12-39.(Xie Jin-shi.Research on the warm-cold composite precision forming process of large module spur gear[D].Hefei:Hefei University of Technology,2012:12-39.)
    [4]A A Kamouneh,Ni J,Stephenson D.Investigation of work hardening of flat-rolled helical-involute gears through grain-flow analysis.FE-modeling,and stain signature[J].International Journal of Machine Tools and Manufacture,2007,47(7-8):1285-1291.
    [5]刘慧敏.直齿轮滚轧成形工艺设计及数值模拟[D].济南:山东大学,2013.(Liu Hui-min.Process design&numerical simulation of spur gear rolling[D].Jinan:Shandong University,2013.)
    [6]Neugebauer R,Hellfritzsch U,Lahl M.Advanced process limits by rolling of helical gears[J].International Journal of Material Forming,2008(11):1183-1186.
    [7]李特文.齿轮几何学与应用理论[M].上海:上海科学技术出版社,2008(6).(Li Ti-wen.Gear Geometry and Applied Theory[M].Shanghai:Shanghai Scientific&Technical Publishers,2008(6).