制造车间仿真系统中运输设备碰撞问题的解决方法研究
|
摘要
随着计算机仿真技术的快速发展,越来越多的企业或科研机构应用仿真技术进行系统的仿真与优化研究,提前验证系统设计方案,量化评估系统能力,实现系统的优化升级。可知,仿真效果的真实性直接影响着仿真结果的可信度。针对某企业部件装配生产线,应用Flexsim系统仿真软件对其进行了建模仿真,针对仿真模型中存在的运输设备碰撞问题提出了一套全新的解决方案,并应用Flexsim软件对方案进行了仿真验证,证实了该方案的可行性。
With the rapid development of computer simulation technology,more and more enterprises or scientific research institutions chose simulation technology to carry out research of system simulation and optimization,verify the system design plan in advance,assess system capability quantitatively,optimize and upgrade the system.Therefore,the truth of the simulation effect directly affected the confidence level of the simulation results.Firstly,introduced the operation logic of transportation equipment in an enterprise component assembly line,and the modeling and simulation for the assembly line was realized by using Flexsim software,then proposed a new set of solutions for the collision problem of transport equipment in Flexsim simulation software,finally,used Flexsim to verify the scheme and verify the feasibility of the scheme.
With the rapid development of computer simulation technology,more and more enterprises or scientific research institutions chose simulation technology to carry out research of system simulation and optimization,verify the system design plan in advance,assess system capability quantitatively,optimize and upgrade the system.Therefore,the truth of the simulation effect directly affected the confidence level of the simulation results.Firstly,introduced the operation logic of transportation equipment in an enterprise component assembly line,and the modeling and simulation for the assembly line was realized by using Flexsim software,then proposed a new set of solutions for the collision problem of transport equipment in Flexsim simulation software,finally,used Flexsim to verify the scheme and verify the feasibility of the scheme.
引文
[1]朱权洁.基于Blender引擎的矿山虚拟现实自动建模与运输仿真研究[D].武汉:武汉科技大学,2010.
[2]何智春.基于Flexsim的机加工车间设施布置建模与仿真[D].武汉:武汉理工大学,2009.
[3]周向阳.第三讲:Flexsim系统仿真软件的功能特点[J].物流技术:装备版,2010(5):85-87.
[4]李峰.汽车制造生产系统仿真技术应用实践---基于Flexsim[M].北京:中国水利水电出版社,2017.
[5]尹静,马常松,周向阳.Flexsim物流仿真与系统优化[M].北京:冶金工业出版社,2018.
[6]马向国,刘同娟,蒋荣芬,等.Flexsim现代物流系统仿真应用[M].北京:中国发展出版社,2016.
[7]秦天保,周向阳.实用系统仿真建模与分析---使用Flexsim[M].北京:清华大学出版社,2013.
[8]张晓萍,刘玉坤.系统仿真软件实用教程[M].北京:清华大学出版社,2006.
[9]于绍政,陈靖.Flexsim仿真建模与分析[M].沈阳:东北大学出版社,2018.
[2]何智春.基于Flexsim的机加工车间设施布置建模与仿真[D].武汉:武汉理工大学,2009.
[3]周向阳.第三讲:Flexsim系统仿真软件的功能特点[J].物流技术:装备版,2010(5):85-87.
[4]李峰.汽车制造生产系统仿真技术应用实践---基于Flexsim[M].北京:中国水利水电出版社,2017.
[5]尹静,马常松,周向阳.Flexsim物流仿真与系统优化[M].北京:冶金工业出版社,2018.
[6]马向国,刘同娟,蒋荣芬,等.Flexsim现代物流系统仿真应用[M].北京:中国发展出版社,2016.
[7]秦天保,周向阳.实用系统仿真建模与分析---使用Flexsim[M].北京:清华大学出版社,2013.
[8]张晓萍,刘玉坤.系统仿真软件实用教程[M].北京:清华大学出版社,2006.
[9]于绍政,陈靖.Flexsim仿真建模与分析[M].沈阳:东北大学出版社,2018.