钢轨打磨机理研究进展及展望
|
摘要
综述了钢轨打磨过程中材料的去除机理,主要包括钢轨打磨时材料的去除模型、钢轨打磨温度场,并在此基础上介绍了不同打磨参数、打磨磨石与打磨工况下钢轨材料的去除行为,提出了钢轨打磨效率和打磨质量相互作用机制,总结了钢轨打磨对轮轨滚动接触疲劳的影响因素。提出了未来重点研究方向建议:开展针对磨石特性(如磨料成分、结合剂、粒度、硬度、气孔等)的研究,研发适合我国钢轨的打磨磨石,以提高打磨作业效率和质量,降低打磨作业成本;进一步开展其他特殊工况下的钢轨打磨试验;将钢轨打磨与其他铁路维护作业相结合,在保证轮轨接触状态良好的条件下延长钢轨使用寿命。
The papar reviewed the material removal mechanism including material removal model and temperature field.After that,the removal behaviours under different grinding parameters,grinding stones and grinding conditions were introduced,respectively.Besides,the interaction mechanism between grinding efficiency and quality was put forward.Moreover,the influences of rail grinding on the wheel/rail rolling contact fatigue were concluded.It is suggested that the researches of the properties of grinding stones,such as abrasive composition,binder,granularity,hardness and blowhole,should be conducted to develop suitable grinding stones for China.This may reduce the grinding costs,and improve the grinding efficiency and quality.Moreover,it is necessary to further conduct experimental researches under special conditions.It is noteworthy that rail grinding should be combined with other railway maintenances to improve the rail service life and ensure a good wheel/rail contact conditions.
The papar reviewed the material removal mechanism including material removal model and temperature field.After that,the removal behaviours under different grinding parameters,grinding stones and grinding conditions were introduced,respectively.Besides,the interaction mechanism between grinding efficiency and quality was put forward.Moreover,the influences of rail grinding on the wheel/rail rolling contact fatigue were concluded.It is suggested that the researches of the properties of grinding stones,such as abrasive composition,binder,granularity,hardness and blowhole,should be conducted to develop suitable grinding stones for China.This may reduce the grinding costs,and improve the grinding efficiency and quality.Moreover,it is necessary to further conduct experimental researches under special conditions.It is noteworthy that rail grinding should be combined with other railway maintenances to improve the rail service life and ensure a good wheel/rail contact conditions.
引文
[1]钟雯,赵雪芹,王文健,等.PD3与U71Mn钢轨疲劳裂纹扩展特性研究[J].中国机械工程,2008,19(14):1740-1743.ZHONG Wen,ZHAO Xueqin,WANG Wenjian,et al.Study on Growth Behavior of Fatigue Crack of PD3and U71Mn Rail[J].China Mechanical Engineering,2008,19(14):1740-1743.
[2]郭火明,王文健,刘腾飞,等.重载铁路钢轨损伤行为分析[J].中国机械工程,2014,25(2):267-272.GUO Huoming,WANG Wenjian,LIU Tengfei,et al.Analysis of Damage Behavior of Heavy-haul Railway Rails[J].China Mechanical Engineering,2014,25(2):267-272.
[3] ZHONG W,HU J J,SHEN P,et al.Experimental Investigation between Rolling Contact Fatigue and Wear of High-speed and Heavy-haul Railway and Selection of Rail Material[J].Wear,2011,271(9):2485-2493.
[4] CUERVO P A,SANTA J F,TORO A.Correlations between Wear Mechanisms and Rail Grinding Operations in a Commercial Railroad[J].Tribology International,2015,82:265-273.
[5]周清跃,田常海,张银花,等.高速铁路钢轨打磨关键技术研究[J].中国铁道科学,2012,33(2):66-70.ZHOU Qingyue,TIAN Changhai,ZHANG Yinhua,et al.Research on Key Rail Grinding Technology of High-speed Railway[J].China Railway Science,2012,33(2):66-70.
[6]王文健,陈明韬,郭俊,等.高速铁路钢轨打磨技术及其应用[J].西南交通大学学报,2007,42(5):574-577.WANG Wenjian,CHEN Mingtao,GUO Jun,et al.Rail Grinding Technique and Its Application in High-speed Railway[J].Journal of Southwest Jiaotong University,2007,42(5):574-577.
[7]金学松,杜星,郭俊,等.钢轨打磨技术研究进展[J].西南交通大学学报,2010,45(1):1-11.JIN Xuesong,DU Xing,GUO Jun,et al.State of Arts of Research on Rail Grinding[J].Journal of Southwest Jiaotong University,2010,45(1):1-11.
[8]刘月明,李建勇,蔡永林,等.钢轨打磨技术现状和发展趋势[J].中国铁道科学,2014,35(4):29-37.LIU Yueming,LI Jianyong,CAI Yonglin,et al.Current State and Development Trend of Rail Grinding Technology[J].China Railway Science,2014,35(4):29-37.
[9] LIU Y M,YANG T Y,HE Z,et al.Analytical Modeling of Grinding Process in Rail Profile Correction Considering Grinding Pattern[J].Archives of Civil&Mechanical Engineering,2018,18(2):669-678.
[10] ZENG W,YANG Y,QIU W S,et al.Optimization of the Target Profile for Asymmetrical Rail Grinding in Sharp-radius Curves for High-speed Railways[J].Advances in Mechanical Engineering,2017,9(2):1-12.
[11]郭福安,张梅.客运专线钢轨打磨的思考[J].中国铁路,2008(3):53-54.GUO Fuan,ZHANG Mei.Consideration into Rail Grinding for Passenger Transit Line[J].China Railways,2008(3):53-54.
[12]智少丹,李建勇,蔡永林,等.基于标准廓形钢轨的打磨模式机理[J].中南大学学报(自然科学版),2015,46(6):2027-2035.ZHI Shaodan,LI Jianyong,CAI Yonglin,et al.Mechanisms of Rail Grinding Patterns Based on Standard Rail Profile[J].Journal of Central South University(Science and Technology),2015,46(6):2027-2035.
[13] LIN Qiang,GUO Jun,WANG Hengyu,et al.Study on Optimal Design of Rail Grinding Patterns Based on Rail Grinding Target Profile[J].Proceedings of the Institution of Mechanical Transit Engineers,Part F:Journal of Rail and Rapid,2018,232(2):560-571.
[14] MARCEL T. High-speed-grinding-rail Maintenance within a Timetable[J].Railway Track&Structures,2011(6):49-50.
[15]许孝堂.钢轨高速打磨机理研究[D].成都:西南交通大学,2016.XU Xiaotang.Study on the Mechanism of Rail High Speed Grinding[D].Chengdu:Southwest Jiaotong University,2016.
[16]樊文刚,程继发,吴月峰,等.基于内凹型接触轮的钢轨砂带打磨静态接触行为与仿真研究[J].机械工程学报,2018,54(14):152-158.FAN Wengang,CHENG Jifa,WU Yuefeng,et al.Research on Static Contact Behavior and Simulation for Rail Grinding by Abrasive Belt Based on Concave Type Contact Wheel[J].Journal of Mechanical Engineering,2018,54(14):152-158.
[17]樊文刚,刘月明,王文玺,等.基于弹性赫兹接触的钢轨砂带打磨材料去除建模研究[J].机械工程学报,2018,54(15):191-198.FAN Wengang,LIU Yueming,WANG Wenxi,et al.Research on Modeling Method of Material Removal for Rail Grinding by Abrasive Belt Based on Elastic Hertzian Contact[J].Journal of Mechanical Engineering,2018,54(15):191-198.
[18] HE Zhe,LI Jianyong,LIU Yueming,et al.Investigating the Effects of Contact Pressure on Rail Material Abrasive Belt Grinding Performance[J].International Journal of Advanced Manufacturing Technology,2017,93(10):1-8.
[19]刘月明,何喆,王荣全,等.钢轨试件砂带磨削行为试验研究[J].应用基础与工程科学学报,2017,25(2):419-426.LIU Yueming,HE Zhe,WANG Rongquan,et al.Experimental Study on Abrasive Belt Grinding Behavior of Rail Test Parts[J].Journal of Basic Science and Engineering,2017,25(2):419-426.
[20]张科元,王文健,郭俊,等.钢轨打磨过程中打磨压力波动行为分析[J].机械强度,2016,38(2):8-13.ZHANG Keyuan,WANG Wenjian,GUO Jun,et al.Analysis of Pressure Fluctuation Behavior during the Rail Grinding Process[J].Journal of Mechanical Strength,2016,38(2):8-13.
[21] ZHI S D,LI J Y,ZAREMBSKI A M.Modelling of Dynamic Contact Length in Rail Grinding Process[J].Frontiers of Mechanical Engineering,2014,9(3):242-248.
[22] ZHI S D,ZAREMBSKI A M,LI J Y.Towards a Better Understanding of the Rail Grinding Mechanism[C]//Proceedings of the ASME 2013 Rail Transportation Division Fall Technical Conference.Altoona,2013:1-11.
[23]商维,王文健,郭俊,等.基于SPH法的钢轨打磨单颗磨粒磨削仿真[J].金刚石与磨料磨具工程,2016,36(3):54-59.SHANG Wei,WANG Wenjian,GUO Jun,et al.Simulation of Single Grain Grinding in Rail Grinding Based on SPH Method[J].Diamond&Abrasives Engineering,2016,36(3):54-59.
[24]商维,张沭玥,郭俊,等.基于虚拟砂轮建模的钢轨打磨材料去除仿真研究[J].机械工程学报,2018,54(4):30-36.SHANG Wei,ZHANG Shuyue,GUO Jun,et al.Simulation Study on Material Removal of Rail Grinding Based on Virtual Grinding Wheel Modeling[J].Journal of Mechanical Engineering,2018,54(4):30-36.
[25]张沭玥,周坤,王文健,等.打磨参数对钢轨打磨磨石磨损与材料去除影响研究[J].摩擦学学报,2018,38(3):327-333.ZHANG Shuyue,ZHOU Kun,WANG Wenjian,et al.Effects of Grinding Parameters on the Wear of Grinding Stone and Rail Material Removal[J].Tribology,2018,38(3):327-333.
[26]顾凯凯,杜星,王文健,等.钢轨打磨磨屑行为分析[J].热加工工艺,2014,43(14):72-74.GU Kaikai,DU Xing,WANG Wenjian,et al.Analysis on Wear Debris of Rail Grinding[J].Hot Working Technology,2014,43(14):72-74.
[27]聂蒙,李建勇,沈海阔,等.钢轨打磨作业过程中磨削温度建模与仿真[J].铁道学报,2013,35(10):89-93.NIE Meng,LI Jianyong,SHEN Haikuo,et al.Modeling and Simulation of Temperature in Process of Rail Grinding Operation[J].Journal of the China Railway Society,2013,35(10):89-93.
[28]张青,崔晓璐,陈光雄,等.钢轨打磨热力耦合分析[J].铁道学报,2015,37(5):78-82.ZHANG Qing,CUI Xiaolu,CHEN Guangxiong,et al.Thermal-mechanical Coupling Analysis in Rail Grinding[J].Journal of the China Railway Society,2015,37(5):78-82.
[29] ZHANG Z Y,SHANG W,DING H H,et al.Thermal Model and Temperature Field in Rail Grinding Process Based on A Moving Heat Source[J].Applied Thermal Engineering,2016,106:855-864.
[30]张子舆.钢轨打磨过程中钢轨温度场及热机应力研究[D].成都:西南交通大学,2017.ZHANG Ziyu.Study on Rail Temperature Field and Thermal Engine Stress during Rail Grinding Process[D].Chengdu:Southwest Jiaotong University,2017.
[31] LIN B,ZHOU K,GUO J,et al.Influence of Grinding Parameters on Surface Temperature and Burn Behaviors of Grinding Rail[J].Tribology International,2018,122:151-162.
[32] GU K K,LIN Q,WANG W J,et al.Analysis on the Effects of Rotational Speed of Grinding Stone on Removal Behavior of Rail Material[J].Wear,2015,342(3):52-59.
[33] WANG W J,GU K K,ZHOU K,et al.Influence of Granularity of Grinding Stone on Grinding Force and Material Removal in the Rail Grinding Process[J].Archive Proceedings of the Institution of Mechanical Engineers Part J,Journal of Engineering Tribology,2018:135065011877949.
[34] UHLMANN E,LYPOVKA P,HOCHSCHILD L.Influence of Rail Grinding Process Parameters on Rail Surface Roughness and Surface Layer Hardness[J].Wear,2016,366/367:287-293.
[35] ZHOU K,WANG W J,WANG R X,et al.Influence of the Grinding Pressure on the Removal Behaviours of Rail Material[C]//11th International Conference on Contact Mechanics and Wear on Rail/Wheel System.Delft,2018:1191-1198.
[36]李伯民,赵波,李清.磨料、磨具与磨削技术[M].北京:化学工业出版社,2010.LI Boming,ZHAO Bo,LI Qing.Abrasive and Grinding Techniques[M].Beijing:Chemical Industry Press,2010.
[37] KANEMATSU Y,SATOH Y.Influence of Type of Grinding Stone on Rail Grinding Efficiency[J].Quarterly Report of RTRI,2011,52(2):97-102.
[38]张国文,贺春江,裴顶峰.酚醛树脂对钢轨打磨砂轮磨削性能的影响[J].铁道技术监督,2015(2):21-24.ZHANG Guowen,HE Chunjiang,PEI Dingfeng.Effect of Phenolic Resin on Grinding Performance of Rail Grinding Wheel[J].Railway Quality Control,2015(2):21-24.
[39]张未.钢轨打磨技术[M].北京:中国铁道出版社,2016.ZHANG Wei.The Theory and Practices of Rail Grinding[M].Beijing:China Railway Publishing House,2016.
[40]许孝堂,王衡禹,吴磊,等.水介质对钢轨高速被动式打磨影响的试验研究[J].润滑与密封,2016,41(11):41-44.XU Xiaotang,WANG Hengyu,WU Lei,et al.An Experimental Study on High-speed Rail Grinding under Wet Condition[J].Lubrication Engineering,2016,41(11):41-44.
[41]付青云,吴磊,陈帅,等.钢轨打磨对焊接接头区的不平顺及其动力学响应的影响[J].润滑与密封,2016,41(3):66-80.FU Qingyun,WU Lei,CHEN Shuai,et al.The Effect of Rail Grinding on Weld Irregularity and Dynamic Response[J].Lubrication Engineering,2016,41(3):66-80.
[42]贾春,戴虹,汪鹏举,等.钢轨现场焊打磨工艺对接头质量的影响[J].电焊机,2016,46(8):76-79.JIA Chun,DAI Hong,WANG Pengju,et al.Influence of Grinding Procedure for the Quality of Rail Field Welded Joint[J].Electric Welding Machine,2016,46(8):76-79.
[43]刘建勋.浅谈高速铁路道岔钢轨焊接接头打磨技术[J].中小企业管理与科技,2017(9):187-188.LIU Jianxun.A Brief Discussion on the Welding Joint Grinding Technology of the Switch Rail of High Speed Railway[J].Management&Technology of SME,2017(9):187-188.
[44] MA L,HE C G,ZHAO X J,et al.Study on Wear and Rolling Contact Fatigue Behaviors of Wheel/Rail Materials under Different Slip Ratio Conditions[J].Wear,2016,366:13-26.
[45]马晓明.钢轨打磨概述及提高打磨质量[J].现代商贸工业,2013(11):177-179.MA Xiaoming.Description of Rail Grinding and Improvement of Grinding Quality[J].Modern Business Trade Industry,2013(11):177-179.
[46]卢军.钢轨打磨列车打磨质量控制[J].铁道技术监督,2011,39(1):26-28.LU Jun.Controlling the Grinding Quality of Railway Grinding Train[J].Railway Quality Control,2011,39(1):26-28.
[47]汪奕,王国恩.京沪高速铁路廊坊站道岔打磨验收标准的分析及应用[J].铁道标准设计,2014,58(11):72-76.WANG Yi,WANG Guoen.Analysis and Application of Switch Grinding Acceptance Criteria for Langfang Railway Station on Beijing-Shanghai High-speed Railway[J].Railway Stand Design,2014,58(11):72-76.
[48]何娟娟.钢轨打磨参数对打磨量影响与打磨模式研究[D].北京:北京交通大学,2014.HE Juanjuan.Research on the Effect of Rail Grinding Parameters on Grinding Quantity and Grinding Mode[D].Beijing:Beijing Jiaotong University,2014.
[49] STEENBERGEN M.Rolling Contact Fatigue in Relation to Rail Grinding[J].Wear,2016,356/357:110-121.
[50] RASMUSSEN C J,FAESTER S,DHAR S,et al.Surface Crack Formation on Rails at Grinding Induced Martensite White Etching Layers[J].Wear,2017,384:8-14.
[51] ZHANG Y,LI C,JI H,et al.Analysis of Grinding Mechanics and Improved Predictive Force Model Based on Material-removal and Plastic-stacking Mechanisms[J].International Journal of Machine Tools and Manufacture,2017,122:81-97.
[52] DING J,LEWIS R,BEAGLES A,et al.Application of Grinding to Reduce Rail Side Wear in Straight Track[J].Wear,2018,402:71-79.
[53] LUNDMARK J.Rail Grinding and Its Impact on the Wear of Wheels and Rails[D].Sweden:LuleTekniska Universitet,2007.
[54] SCHRECKENBERG D,MOHLER U,LIEPERT M,et al.The Impact of Railway Grinding on Noise Levels and ResidentsNoise Responses—PartⅡ:The Role of Information[C]//Proceedings of the Inter-noise and Noise-con Congress and Conference.Innsbruck,2013:15-18.
[55]何元勋.高速铁路钢轨预打磨技术探讨[J].铁路技术创新,2013(1):17-20.HE Yuanxun.Discussion on the Pre-grinding Technology of Rail for High Speed Railway[J].Railway Technical Innovation,2013(1):17-20.
[56] SINGLETON R,MARSHALL M B,LEWIS R,et al.Rail Grinding for the 21st Century—Taking a Lead from the Aerospace Industry[J].Proceedings of the Institution of Mechanical Engineers Part F:Journal of Rail&Rapid Transit,2015,229(5):457-465.
[57]张铭达,刘学毅.钢轨预防性打磨原理及应用[J].铁道建筑,2006(7):86-88.ZHANG Mingda,LIU Xueyi.Preventive Rail Grinding Principles and Its Use[J].Railway Engineering,2006(7):86-88.
[58] DIEST K V.Preventive Grinding to Combat Rolling Contact Fatigue[J].Railway Gazette International,2011,167(8):32-34.
[59] SATOH Y,IWAFUCHI K.Effect of Rail Grinding on Rolling Contact Fatigue in Railway Rail Used in Conventional Line in Japan[J].Wear,2008,265(9):1342-1348.
[60] CHEN H,ISHIDA M.Influence of Rail Surface Roughness Formed by Rail Grinding on Rolling Contact Fatigue[J].Quarterly Report of RTRI,2007,47(4):216-221.
[61] KHALLADI A,ELLEUCH K.Effect of Surface Topography with Different Groove Angles on Tribological Behavior of the Wheel/Rail Contact Using Alternative Machine[J].Friction,2016,4(3):1-11.
[62]郭帅.水油介质下打磨磨痕对钢轨材料接触疲劳损伤影响[D].成都:西南交通大学,2018.GUO Shuai.The Effect of Grinding Marks on Contact Fatigue Damage of Rail Materials under the Water and Oil Medium Conditions[D].Chengdu:Southwest Jiaotong University,2018.
[63]张斌,黄家豪.涂油技术对曲线钢轨磨耗与振动的影响分析[J].现代交通技术,2014(2):80-83.ZHANG Bin,HUANG Jiahao.Effect Analysis of Lubricant Technology on Curve Rail Wear and Vibration[J].Modern Transportation Technology,2014(2):80-83.
[64]姚雪松,吴磊,王衡禹,等.轨顶摩擦改进剂对车辆动力学性能的影响[J].润滑与密封,2015(5):58-63.YAO Xuesong,WU Lei,WANG Hengyu,et al.Effect of Friction Modifier of Rail Top on Dynamic Performance of Vehicles[J].Lubrication Engineering,2015(5):58-63.
[65] EBERHARD A,EMRAH T,FLORIAN F,et al.High Speed Rail Milling-new Approach to Increase the Productivity and Process Quality in Maintenance of Rails[C]//13th High Speed Machining Conference.Metz,2016,October 4th-5th.
[2]郭火明,王文健,刘腾飞,等.重载铁路钢轨损伤行为分析[J].中国机械工程,2014,25(2):267-272.GUO Huoming,WANG Wenjian,LIU Tengfei,et al.Analysis of Damage Behavior of Heavy-haul Railway Rails[J].China Mechanical Engineering,2014,25(2):267-272.
[3] ZHONG W,HU J J,SHEN P,et al.Experimental Investigation between Rolling Contact Fatigue and Wear of High-speed and Heavy-haul Railway and Selection of Rail Material[J].Wear,2011,271(9):2485-2493.
[4] CUERVO P A,SANTA J F,TORO A.Correlations between Wear Mechanisms and Rail Grinding Operations in a Commercial Railroad[J].Tribology International,2015,82:265-273.
[5]周清跃,田常海,张银花,等.高速铁路钢轨打磨关键技术研究[J].中国铁道科学,2012,33(2):66-70.ZHOU Qingyue,TIAN Changhai,ZHANG Yinhua,et al.Research on Key Rail Grinding Technology of High-speed Railway[J].China Railway Science,2012,33(2):66-70.
[6]王文健,陈明韬,郭俊,等.高速铁路钢轨打磨技术及其应用[J].西南交通大学学报,2007,42(5):574-577.WANG Wenjian,CHEN Mingtao,GUO Jun,et al.Rail Grinding Technique and Its Application in High-speed Railway[J].Journal of Southwest Jiaotong University,2007,42(5):574-577.
[7]金学松,杜星,郭俊,等.钢轨打磨技术研究进展[J].西南交通大学学报,2010,45(1):1-11.JIN Xuesong,DU Xing,GUO Jun,et al.State of Arts of Research on Rail Grinding[J].Journal of Southwest Jiaotong University,2010,45(1):1-11.
[8]刘月明,李建勇,蔡永林,等.钢轨打磨技术现状和发展趋势[J].中国铁道科学,2014,35(4):29-37.LIU Yueming,LI Jianyong,CAI Yonglin,et al.Current State and Development Trend of Rail Grinding Technology[J].China Railway Science,2014,35(4):29-37.
[9] LIU Y M,YANG T Y,HE Z,et al.Analytical Modeling of Grinding Process in Rail Profile Correction Considering Grinding Pattern[J].Archives of Civil&Mechanical Engineering,2018,18(2):669-678.
[10] ZENG W,YANG Y,QIU W S,et al.Optimization of the Target Profile for Asymmetrical Rail Grinding in Sharp-radius Curves for High-speed Railways[J].Advances in Mechanical Engineering,2017,9(2):1-12.
[11]郭福安,张梅.客运专线钢轨打磨的思考[J].中国铁路,2008(3):53-54.GUO Fuan,ZHANG Mei.Consideration into Rail Grinding for Passenger Transit Line[J].China Railways,2008(3):53-54.
[12]智少丹,李建勇,蔡永林,等.基于标准廓形钢轨的打磨模式机理[J].中南大学学报(自然科学版),2015,46(6):2027-2035.ZHI Shaodan,LI Jianyong,CAI Yonglin,et al.Mechanisms of Rail Grinding Patterns Based on Standard Rail Profile[J].Journal of Central South University(Science and Technology),2015,46(6):2027-2035.
[13] LIN Qiang,GUO Jun,WANG Hengyu,et al.Study on Optimal Design of Rail Grinding Patterns Based on Rail Grinding Target Profile[J].Proceedings of the Institution of Mechanical Transit Engineers,Part F:Journal of Rail and Rapid,2018,232(2):560-571.
[14] MARCEL T. High-speed-grinding-rail Maintenance within a Timetable[J].Railway Track&Structures,2011(6):49-50.
[15]许孝堂.钢轨高速打磨机理研究[D].成都:西南交通大学,2016.XU Xiaotang.Study on the Mechanism of Rail High Speed Grinding[D].Chengdu:Southwest Jiaotong University,2016.
[16]樊文刚,程继发,吴月峰,等.基于内凹型接触轮的钢轨砂带打磨静态接触行为与仿真研究[J].机械工程学报,2018,54(14):152-158.FAN Wengang,CHENG Jifa,WU Yuefeng,et al.Research on Static Contact Behavior and Simulation for Rail Grinding by Abrasive Belt Based on Concave Type Contact Wheel[J].Journal of Mechanical Engineering,2018,54(14):152-158.
[17]樊文刚,刘月明,王文玺,等.基于弹性赫兹接触的钢轨砂带打磨材料去除建模研究[J].机械工程学报,2018,54(15):191-198.FAN Wengang,LIU Yueming,WANG Wenxi,et al.Research on Modeling Method of Material Removal for Rail Grinding by Abrasive Belt Based on Elastic Hertzian Contact[J].Journal of Mechanical Engineering,2018,54(15):191-198.
[18] HE Zhe,LI Jianyong,LIU Yueming,et al.Investigating the Effects of Contact Pressure on Rail Material Abrasive Belt Grinding Performance[J].International Journal of Advanced Manufacturing Technology,2017,93(10):1-8.
[19]刘月明,何喆,王荣全,等.钢轨试件砂带磨削行为试验研究[J].应用基础与工程科学学报,2017,25(2):419-426.LIU Yueming,HE Zhe,WANG Rongquan,et al.Experimental Study on Abrasive Belt Grinding Behavior of Rail Test Parts[J].Journal of Basic Science and Engineering,2017,25(2):419-426.
[20]张科元,王文健,郭俊,等.钢轨打磨过程中打磨压力波动行为分析[J].机械强度,2016,38(2):8-13.ZHANG Keyuan,WANG Wenjian,GUO Jun,et al.Analysis of Pressure Fluctuation Behavior during the Rail Grinding Process[J].Journal of Mechanical Strength,2016,38(2):8-13.
[21] ZHI S D,LI J Y,ZAREMBSKI A M.Modelling of Dynamic Contact Length in Rail Grinding Process[J].Frontiers of Mechanical Engineering,2014,9(3):242-248.
[22] ZHI S D,ZAREMBSKI A M,LI J Y.Towards a Better Understanding of the Rail Grinding Mechanism[C]//Proceedings of the ASME 2013 Rail Transportation Division Fall Technical Conference.Altoona,2013:1-11.
[23]商维,王文健,郭俊,等.基于SPH法的钢轨打磨单颗磨粒磨削仿真[J].金刚石与磨料磨具工程,2016,36(3):54-59.SHANG Wei,WANG Wenjian,GUO Jun,et al.Simulation of Single Grain Grinding in Rail Grinding Based on SPH Method[J].Diamond&Abrasives Engineering,2016,36(3):54-59.
[24]商维,张沭玥,郭俊,等.基于虚拟砂轮建模的钢轨打磨材料去除仿真研究[J].机械工程学报,2018,54(4):30-36.SHANG Wei,ZHANG Shuyue,GUO Jun,et al.Simulation Study on Material Removal of Rail Grinding Based on Virtual Grinding Wheel Modeling[J].Journal of Mechanical Engineering,2018,54(4):30-36.
[25]张沭玥,周坤,王文健,等.打磨参数对钢轨打磨磨石磨损与材料去除影响研究[J].摩擦学学报,2018,38(3):327-333.ZHANG Shuyue,ZHOU Kun,WANG Wenjian,et al.Effects of Grinding Parameters on the Wear of Grinding Stone and Rail Material Removal[J].Tribology,2018,38(3):327-333.
[26]顾凯凯,杜星,王文健,等.钢轨打磨磨屑行为分析[J].热加工工艺,2014,43(14):72-74.GU Kaikai,DU Xing,WANG Wenjian,et al.Analysis on Wear Debris of Rail Grinding[J].Hot Working Technology,2014,43(14):72-74.
[27]聂蒙,李建勇,沈海阔,等.钢轨打磨作业过程中磨削温度建模与仿真[J].铁道学报,2013,35(10):89-93.NIE Meng,LI Jianyong,SHEN Haikuo,et al.Modeling and Simulation of Temperature in Process of Rail Grinding Operation[J].Journal of the China Railway Society,2013,35(10):89-93.
[28]张青,崔晓璐,陈光雄,等.钢轨打磨热力耦合分析[J].铁道学报,2015,37(5):78-82.ZHANG Qing,CUI Xiaolu,CHEN Guangxiong,et al.Thermal-mechanical Coupling Analysis in Rail Grinding[J].Journal of the China Railway Society,2015,37(5):78-82.
[29] ZHANG Z Y,SHANG W,DING H H,et al.Thermal Model and Temperature Field in Rail Grinding Process Based on A Moving Heat Source[J].Applied Thermal Engineering,2016,106:855-864.
[30]张子舆.钢轨打磨过程中钢轨温度场及热机应力研究[D].成都:西南交通大学,2017.ZHANG Ziyu.Study on Rail Temperature Field and Thermal Engine Stress during Rail Grinding Process[D].Chengdu:Southwest Jiaotong University,2017.
[31] LIN B,ZHOU K,GUO J,et al.Influence of Grinding Parameters on Surface Temperature and Burn Behaviors of Grinding Rail[J].Tribology International,2018,122:151-162.
[32] GU K K,LIN Q,WANG W J,et al.Analysis on the Effects of Rotational Speed of Grinding Stone on Removal Behavior of Rail Material[J].Wear,2015,342(3):52-59.
[33] WANG W J,GU K K,ZHOU K,et al.Influence of Granularity of Grinding Stone on Grinding Force and Material Removal in the Rail Grinding Process[J].Archive Proceedings of the Institution of Mechanical Engineers Part J,Journal of Engineering Tribology,2018:135065011877949.
[34] UHLMANN E,LYPOVKA P,HOCHSCHILD L.Influence of Rail Grinding Process Parameters on Rail Surface Roughness and Surface Layer Hardness[J].Wear,2016,366/367:287-293.
[35] ZHOU K,WANG W J,WANG R X,et al.Influence of the Grinding Pressure on the Removal Behaviours of Rail Material[C]//11th International Conference on Contact Mechanics and Wear on Rail/Wheel System.Delft,2018:1191-1198.
[36]李伯民,赵波,李清.磨料、磨具与磨削技术[M].北京:化学工业出版社,2010.LI Boming,ZHAO Bo,LI Qing.Abrasive and Grinding Techniques[M].Beijing:Chemical Industry Press,2010.
[37] KANEMATSU Y,SATOH Y.Influence of Type of Grinding Stone on Rail Grinding Efficiency[J].Quarterly Report of RTRI,2011,52(2):97-102.
[38]张国文,贺春江,裴顶峰.酚醛树脂对钢轨打磨砂轮磨削性能的影响[J].铁道技术监督,2015(2):21-24.ZHANG Guowen,HE Chunjiang,PEI Dingfeng.Effect of Phenolic Resin on Grinding Performance of Rail Grinding Wheel[J].Railway Quality Control,2015(2):21-24.
[39]张未.钢轨打磨技术[M].北京:中国铁道出版社,2016.ZHANG Wei.The Theory and Practices of Rail Grinding[M].Beijing:China Railway Publishing House,2016.
[40]许孝堂,王衡禹,吴磊,等.水介质对钢轨高速被动式打磨影响的试验研究[J].润滑与密封,2016,41(11):41-44.XU Xiaotang,WANG Hengyu,WU Lei,et al.An Experimental Study on High-speed Rail Grinding under Wet Condition[J].Lubrication Engineering,2016,41(11):41-44.
[41]付青云,吴磊,陈帅,等.钢轨打磨对焊接接头区的不平顺及其动力学响应的影响[J].润滑与密封,2016,41(3):66-80.FU Qingyun,WU Lei,CHEN Shuai,et al.The Effect of Rail Grinding on Weld Irregularity and Dynamic Response[J].Lubrication Engineering,2016,41(3):66-80.
[42]贾春,戴虹,汪鹏举,等.钢轨现场焊打磨工艺对接头质量的影响[J].电焊机,2016,46(8):76-79.JIA Chun,DAI Hong,WANG Pengju,et al.Influence of Grinding Procedure for the Quality of Rail Field Welded Joint[J].Electric Welding Machine,2016,46(8):76-79.
[43]刘建勋.浅谈高速铁路道岔钢轨焊接接头打磨技术[J].中小企业管理与科技,2017(9):187-188.LIU Jianxun.A Brief Discussion on the Welding Joint Grinding Technology of the Switch Rail of High Speed Railway[J].Management&Technology of SME,2017(9):187-188.
[44] MA L,HE C G,ZHAO X J,et al.Study on Wear and Rolling Contact Fatigue Behaviors of Wheel/Rail Materials under Different Slip Ratio Conditions[J].Wear,2016,366:13-26.
[45]马晓明.钢轨打磨概述及提高打磨质量[J].现代商贸工业,2013(11):177-179.MA Xiaoming.Description of Rail Grinding and Improvement of Grinding Quality[J].Modern Business Trade Industry,2013(11):177-179.
[46]卢军.钢轨打磨列车打磨质量控制[J].铁道技术监督,2011,39(1):26-28.LU Jun.Controlling the Grinding Quality of Railway Grinding Train[J].Railway Quality Control,2011,39(1):26-28.
[47]汪奕,王国恩.京沪高速铁路廊坊站道岔打磨验收标准的分析及应用[J].铁道标准设计,2014,58(11):72-76.WANG Yi,WANG Guoen.Analysis and Application of Switch Grinding Acceptance Criteria for Langfang Railway Station on Beijing-Shanghai High-speed Railway[J].Railway Stand Design,2014,58(11):72-76.
[48]何娟娟.钢轨打磨参数对打磨量影响与打磨模式研究[D].北京:北京交通大学,2014.HE Juanjuan.Research on the Effect of Rail Grinding Parameters on Grinding Quantity and Grinding Mode[D].Beijing:Beijing Jiaotong University,2014.
[49] STEENBERGEN M.Rolling Contact Fatigue in Relation to Rail Grinding[J].Wear,2016,356/357:110-121.
[50] RASMUSSEN C J,FAESTER S,DHAR S,et al.Surface Crack Formation on Rails at Grinding Induced Martensite White Etching Layers[J].Wear,2017,384:8-14.
[51] ZHANG Y,LI C,JI H,et al.Analysis of Grinding Mechanics and Improved Predictive Force Model Based on Material-removal and Plastic-stacking Mechanisms[J].International Journal of Machine Tools and Manufacture,2017,122:81-97.
[52] DING J,LEWIS R,BEAGLES A,et al.Application of Grinding to Reduce Rail Side Wear in Straight Track[J].Wear,2018,402:71-79.
[53] LUNDMARK J.Rail Grinding and Its Impact on the Wear of Wheels and Rails[D].Sweden:LuleTekniska Universitet,2007.
[54] SCHRECKENBERG D,MOHLER U,LIEPERT M,et al.The Impact of Railway Grinding on Noise Levels and ResidentsNoise Responses—PartⅡ:The Role of Information[C]//Proceedings of the Inter-noise and Noise-con Congress and Conference.Innsbruck,2013:15-18.
[55]何元勋.高速铁路钢轨预打磨技术探讨[J].铁路技术创新,2013(1):17-20.HE Yuanxun.Discussion on the Pre-grinding Technology of Rail for High Speed Railway[J].Railway Technical Innovation,2013(1):17-20.
[56] SINGLETON R,MARSHALL M B,LEWIS R,et al.Rail Grinding for the 21st Century—Taking a Lead from the Aerospace Industry[J].Proceedings of the Institution of Mechanical Engineers Part F:Journal of Rail&Rapid Transit,2015,229(5):457-465.
[57]张铭达,刘学毅.钢轨预防性打磨原理及应用[J].铁道建筑,2006(7):86-88.ZHANG Mingda,LIU Xueyi.Preventive Rail Grinding Principles and Its Use[J].Railway Engineering,2006(7):86-88.
[58] DIEST K V.Preventive Grinding to Combat Rolling Contact Fatigue[J].Railway Gazette International,2011,167(8):32-34.
[59] SATOH Y,IWAFUCHI K.Effect of Rail Grinding on Rolling Contact Fatigue in Railway Rail Used in Conventional Line in Japan[J].Wear,2008,265(9):1342-1348.
[60] CHEN H,ISHIDA M.Influence of Rail Surface Roughness Formed by Rail Grinding on Rolling Contact Fatigue[J].Quarterly Report of RTRI,2007,47(4):216-221.
[61] KHALLADI A,ELLEUCH K.Effect of Surface Topography with Different Groove Angles on Tribological Behavior of the Wheel/Rail Contact Using Alternative Machine[J].Friction,2016,4(3):1-11.
[62]郭帅.水油介质下打磨磨痕对钢轨材料接触疲劳损伤影响[D].成都:西南交通大学,2018.GUO Shuai.The Effect of Grinding Marks on Contact Fatigue Damage of Rail Materials under the Water and Oil Medium Conditions[D].Chengdu:Southwest Jiaotong University,2018.
[63]张斌,黄家豪.涂油技术对曲线钢轨磨耗与振动的影响分析[J].现代交通技术,2014(2):80-83.ZHANG Bin,HUANG Jiahao.Effect Analysis of Lubricant Technology on Curve Rail Wear and Vibration[J].Modern Transportation Technology,2014(2):80-83.
[64]姚雪松,吴磊,王衡禹,等.轨顶摩擦改进剂对车辆动力学性能的影响[J].润滑与密封,2015(5):58-63.YAO Xuesong,WU Lei,WANG Hengyu,et al.Effect of Friction Modifier of Rail Top on Dynamic Performance of Vehicles[J].Lubrication Engineering,2015(5):58-63.
[65] EBERHARD A,EMRAH T,FLORIAN F,et al.High Speed Rail Milling-new Approach to Increase the Productivity and Process Quality in Maintenance of Rails[C]//13th High Speed Machining Conference.Metz,2016,October 4th-5th.