摘要
采用化学溶液沉积制备YBCO薄膜,研究了氧分压对YBCO超导层a轴晶生长的影响.研究发现氧分压是YBCO薄膜a轴晶形成的关键因素.当氧分压改变,YBCO生长模式由c轴生长转变为过渡到a(b)-c混合生长模式.低氧分压可以促进YBCO的c轴生长.高氧分压影响YBCO超导层的微观结构,促使YBCO的织构取向变差,最终导致YBCO超导层的性能降低.
YBCO superconducting layers were prepared by chemical solution deposition.The influence of oxygen partial pressure on the growth of a-axis grains was investigated.The result showed that the oxygen partial pressure was the key parameter for the formation of a-axis grain.The growth model was changed fromc-axis growth to the a(b)-c axis mixed growth with increasing the oxygen partial pressure.It was useful for c-axis grain growth in the case of low oxygen partial pressure.When the oxygen partial pressure was kept high level,YBCO layer had weak texture and poor microstructure.The a-axis and b-axis grains with the angle of 90°were formed on the surface.It would lead to the low performance of YBCO film.
引文
[1]Foltyn S.R.Cival L.Macmanus-Driscoll J.L.Jia Q.X.Maiorov B.Wang H.Maley M.,Nature Materials,6(2007)631.
[2]Rupich M.W.Verebelyi D.T.Zhang W.Kodenkandath T.Li X.,MRS Bulletin/August,29(2004),572.
[3]Wesolowski D.E.Yoshizumi M.Cima M.,IEEE Trans.Appl.Supercond.,17(2007),3351.
[4]Araki T.Hirabayashi I.,Supercond.Sci.Technol.,16(2003),R71.
[5]Wu L.Solovyov V.F.Wiesmann H.J.Zhu Y.Suenaga M.,Appl.Phys.Lett.,80(2002),419.
[6]Wong N.W.Levin I.Cook L.P.Feenstra R.,Appl.Phys.Lett.,88(2006),102507.
[7]Solovyov V.Dimitrov I.K.Li Q.,Supercond.Sci.Technol.,26(2013)013001.
[8]Obradors X.Puig T.Ricart S.Coll M.Gazquez J.Palau A.Granados X.,Supercond.Sci.Technol.,25(2012)123001.
[9]Wesolowski D.E.Patta Y.R.Cima M.J.,Physica C,469(2009)766.
[10]Chen H.Zalamova K.Pomar A.Granados X.Puig T.Obradors X.,J.Mater.Res.,25(2010)2371.
[11]Feenstra R.Lindemer T.B.Budai J.D.,J.Appl.Phys.,69(1991)6569.
[12]Araki T.Niwa T.Yamada Y.,J Appl Phys,92(2002)3318.
[13]Cai Y.Q.Tang C.Y.Sun L.J.Jin G.Li W.Lai Y.J.Yao X.,Crystal Growth&Design,7(2007),1469.