摘要
泉子街地区页岩气参数井钻进过程中存在地层可钻性差、研磨性较强,钻进速度慢,单只钻头(牙轮、PDC)进尺少且报废率高等问题。本文通过对泉子街区块岩石可钻性进行分析、评价,可以为该区页岩气勘查钻井施工钻头选型和钻井工程设计优化提供依据,从而达到提高该区钻井施工效率、降低钻井成本、缩短项目工作周期的目的。
During drilling of shale gas parameter wells in the block of Quanzijie area,there were some problems such as poor formation drillability,strong abrasiveness,slow drilling rate,less footage per drill bit(cone,PDC)and high abandonment rate.Through the analysis and evaluation of the rock drillability of the Quanzijie block,this paper provides the basis for shale gas exploration drilling bit selection and the optimization of the drilling design in this area so as to achieve the purpose of improving drilling efficiency,reducing drilling cost and shortening the construction duration.
引文
[1]赵军,蔡亚西,林元华.声波测井资料在岩石可钻性及钻头选型中的应用[J].测井技术,2001,25(4):305-307.ZHAO Jun,CAI Yaxi,LIN Yuanhua.Application of sonic logs to rock drillability and bit selection[J].Well Logging Technology,2001,25(4):305-307.
[2]段隆臣,刘鹏,高元宏,等.青海野马泉矿区岩石可钻性的分析和应用[J].探矿工程(岩土钻掘工程),2013,40(10):1-4.DUAN Longchen,LIU Peng,GAO Yuanhong,et al.Analysis and application of rock drillability in Qinghai Yemaquan mine[J].Exploration Engineering(Rock&Soil Drilling and Tunneling),2013,40(10):1-4.
[3]李士斌,闫铁,李玮.地层岩石可钻性的分形表示方法[J].石油学报,2006,27(1):124-127.LI Shibin,YAN Tie,LI Wei.Fractal representation of rock drillability[J].Acta Petrolei Sinica,2006,27(1):124-127.
[4]孙连环,鲍洪志,杨红歧,等.准噶尔盆地地层岩石可钻性研究[J].石油地质与工程,2009,23(3):86-88.SUN Lianhuan,BAO Hongzhi,YANG Hongqi,et al.Study on drillability of rocks in Junggar basin[J].Petroleum Geology and Engineering,2009,23(3):86-88.
[5]刘向君,宴建军,罗平亚,等.利用测井资料评价岩石可钻性研究[J].天然气工业,2005,25(7):69-71.LIU Xiangjun,YAN Jianjun,LUO Pingya,et al.Evaluation on rock drillability by well logging data[J].Natural Gas Industry,2005,25(7):69-71.
[6]夏宏南,杨明合,谭家虎,等.一种利用测井资料预测岩石可钻性的计算机方法[J].探矿工程(岩土钻掘工程),2004,31(1):47-49.XIA Hongnan,YANG Minghe,TAN Jiahu,et al.A computerized methods to calculate the rock drillability with logging data[J].Exploration Engineering(Rock&Soil Drilling and Tunneling),2004,31(1):47-49.
[7]王玉玺,张思慧,李欢欢.根据钻速方程分析提高钻速的有效途径[J].探矿工程(岩土钻掘工程),2010,37(3):14-17.WANG Yuxi,ZHANG Sihui,LI Huanhuan.Effective approach to improving drilling rate according to the analysis on drilling rate equation[J].Exploration Engineering(Rock&Soil Drilling and Tunneling),2010,37(3):14-17.
[8]白胜.库车山前地区抗钻特性及钻头优选技术研究[D].湖北荆州:长江大学,2015.BAI Sheng.Kuqapiedmont region drilling resistance characteristic and bit drilling optimization technology research[D].Jingzhou Hubei:Yangtze University,2015.