配电网单相接地故障脉冲电流测距

详细信息    查看全文 | 推荐本文 |

英文篇名：Pulse current fault location for single-phase grounding of distribution network 作者：刘小江 ; 陈坤燚 ; 肖先勇 ; 范松海 英文作者：Liu Xiaojiang;Chen Kunyi;Xiao Xianyong;Fan Songhai;Electric Power Research Institute of State Grid Sichuan Electric Power Company;Sichuan University; 关键词：故障测距 ; 脉冲电流测距 ; 消弧线圈 ; 中性点非有效接地系统 英文关键词：fault location;;fault location of pulse current;;arc suppression coil;;non-effectively grounded neutral 中文刊名：DCYQ 英文刊名：Electrical Measurement & Instrumentation 机构：国网四川省电力公司电力科学研究院;四川大学; 出版日期：2018-10-10 出版单位：电测与仪表 年：2018 期：v.55;No.696 基金：四川省科技攻关项目(2017JY0032);; 国网四川省电力公司科技资助项目(521997160026);; 国家电网公司科技资助项目(国家电网科[2017]179号文第169号项目) 语种：中文; 页：DCYQ201819004 页数：7 CN：19 ISSN：23-1202/TH 分类号：20-26

摘要

针对配网单相接地故障电流较小,测距困难的问题,提出了一种脉冲电流测距方法。该方法通过短时改变中性点接地方式,在故障线路上产生幅值较大的脉冲电流。合理选择连接于中性点的限流电阻,将暂态过程控制在脉冲电流前半段,采用后半段数据计算脉冲电流稳态特征。利用脉冲电流稳态特征与故障距离之间的关系,实现了脉冲电流故障测距。该方法用于测距的脉冲电流幅值较大,可有效解决单相接地故障测距问题。通过MATLAB/Simulink仿真表明该方法具有较高的精度且受接地电阻影响较小。
        A fault location method based on pulse current is presented,this method aims at dealing with the problem that the position of fault cannot be calculated accurately because the amplitude of single-phase grounding fault current is very smaller. A large amplitude pulse current is produced in fault line through changing the neutral grounding model in a short time. The transient process of pulse current can be controlled in the range of first half through selecting the current limiting resistance reasonably,and the second half of pulse current can be used to calculate the steady character of pulse current.The fault location method can be implemented according to the relations between the steady character of pulse current and the fault position. The MATLAB/Simulink simulation results show that the presented fault location method has a high precision and little effect by ground resistance.

引文

[1]张文海,肖先勇,汪颖.基于故障暂态信号及其衰减特征的配网单相接地故障测距[J].电力自动化设备,2013,(3):46-52.Zhang Wenhai,Xiao Xianyong,Wang Ying. Single-phase-to-grou-nd fault location based on transient fault signal and its attenuation charac-ter for distribution network[J]. Electric Power Automation Equipment,2013,(3):46-52.
    [2]唐金锐,尹项根,张哲,等.配电网故障自动定位技术研究综述[J].电力自动化设备,2013,(5):7-13.Tang Jinrui,Yin Xianggen,Zhang Zhe,et al. Survey of fault location technology for distribution networks[J]. Electric Power Automation Equipment,2013,(5):7-13.
    [3]王楠,张利,杨以涵. 10kV配电网单相接地故障交直流信号注入综合定位法[J].电网技术,2008,(24):88-92.Wang Nan,Zhang Li,Yang Yihan. A Comprehensive Location Method Using AC/DC Signal Injecting for Single-Phase Earth Fault in 10 k V Distribution Network[J]. Power System Technology,2008,(24):88-92.
    [4]贾清泉,王振宇,王宁,等.基于参数辨识的消弧线圈接地电网单相接地故障测距方法[J].电工技术学报,2016,(23):77-85.Jia Qingquan,Wang Zhenyu,Wang Ning,et al. A Single-Phase-toGround Fault Locating Algorithm for Arc-Suppression-Coil Earthed Power Distri-bution Systems Based on Parameter Estimation[J]. Transactions of China Electrotechnical Society,2016,(23):77-85.
    [5]程志友,葛昕,王年,等.一种基于暂态电流的故障测距方法[J].电测与仪表,2015,52(12):77-82.Cheng Zhiyou,Ge Xin,Wang Nian,et al. A fault location method based on transient current[J]. Electrical Measurement&Instrumentation,2015,52(12):77-82.
    [6]唐轶,陈奎,陈庆.小电流接地电网单相接地故障的暂态特性[J].高电压技术,2007,(11):175-179.Tang Yi,Chen Kui,Chen Qing. Transient Characteristics of Singlephase-to-ground Fault in the Indirectly Earthed Power System[J]. High Voltage Engineering,2007,(11):175-179.
    [7]朱珂,张鹏,徐文远.一种基于可控短路的故障选线方案[J].电力自动化设备,2008,28(11):1-7.Zhu Ke,Zhang Peng,Xu wilsun. Faulty line idenitifcation using controllable-short-circuits[J]. Electric Power Automation Equipment,2008,28(11):1-7.
    [8]要换年.电力系统谐振接地(第二版)[M].北京:中国电力出版社,2000.
    [9]尹项根,张保会.电力系统继电保护[M].北京:中国电力出版社,2005.
    [10]康忠健,李丹丹,刘晓林.应用非工频暂态分量的配电网故障选线方法[J].电力自动化设备,2011,31(4):1-6.Kang Zhongjian,Li Dandan,Liu Xiaolin. Faulty line selection with non-power frequency transient components of distribution network[J].Electric Power Automation Equipment,2011,31(4):1-6.