摘要
当斜盘轴向柱塞泵处于高压工况时,其配流盘会产生翘曲变形。基于弹性流体动力润滑理论,建立斜盘轴向柱塞泵配流副流固耦合模型,求解配流副润滑控制方程,分析了斜盘轴向柱塞泵缸体转速、缸体倾角、液压油黏度、配流副油膜厚度、配流副密封带宽度等工况与结构参数对其配流盘发生翘曲变形的影响。研究显示:斜盘轴向柱塞泵配流盘变形云图以腰形槽中心连线为轴线呈现一定的对称分布;配流盘高压侧外密封带区域变形最大,配流盘低压侧外密封带区域变形最小;在相同工况下,配流盘的材料与结构影响配流副油膜厚度与形状。
When a swash plate axial piston pump in high-pressure conditions, its valve plate will have warping deformation. Based on the theory of elastic fluid dynamic lubrication, a fluid-solid coupling model of swash plate axial piston pump is established to help solve control equations of the lubrication about port plate pair. We also analyze the effects of operation condition and structural parameters including cylinder speed, cylinder angle, fluid viscosity, oil film thickness and seal band width on the valve plate. The research results show that the deformation cloud chart of valve plate with axial piston pump is symmetrical with the axis line of the waist groove as the axis. The deformation of outer seal zone in the high-pressure side of valve plate is the largest and that in the low-pressure side of valve plate is the least. Under the same conditions, the material and structure of valve plate affect the thickness and shape of oil film.
引文
[1] 杨华勇,艾青林,周华.轴向柱塞泵配流副润滑特性的研究进展[J].中国机械工程,2004,15(17):1587-1593.YANG Huayong,AI Qinglin,ZHOU Hua.Development of Lubrication of Port Plate/Cylinder Block in Axial Piston Pump [J].Chinese Mechanical Engineering,2004,15(17):1587-1593.
[2] 胡纪滨,邹云飞,李小金,等.弹性变形对轴向柱塞泵配流副润滑特性的影响[J].农业工程学报,2009,25(12):114-118.HU Jibin,ZOU Yunfei,LI Xiaojin,et al.Influence of Elastic Deformation on Lubrication Characteristics of Axial Piston Pump Distribution [J].Transactions of the Chinese Society of Agricultural Engineering,2009,25(12):114-118.
[3] 薛虎,许迪初,汪久根.线接触弹流中弹性变形计算方法对比研究[J].润滑与密封,2016,41(7):9-15.XUE Hu,XU Dichu,WANG Jiugen.Comparative Study on Calculation Methods of Elastic Deformation in Line-contact Elasto-hydrodynamic Lubrication [J].Lubrication Engine-ering,2016,41(7):9-15.
[4] WANG X,YAMAGUCHI A.Characteristics of Hydro Static Bearing/Seal Parts for Water Hydraulic Pumps and Motors.Part1:On Eccentric Loading and Power Losses [J].Tribology International,2002,35(7):425-433.
[5] WANG X,YAMAGUCHI A.Characteristics of Hydro Static Bearing/Seal Parts for Water Hydraulic Pumps and Motors.Part2:Experiment and Theory [J].Tribology International,2002,35(7):435-442.
[6] 郑炜,有雄,冯洪江.柱塞泵配油盘变形的有限元计算[J].机床与液压,1990,(3):23-24.ZHENG Wei,YOU Xiong,FENG Hongjiang.Deformation Solution of Finite Element Method in the Port Plate Pair of Piston Pump [J].Machine Tool & Hydraulics,1990,(3):23-24.
[7] 温诗铸,杨沛然.弹性流体动力润滑[M].北京:清华大学出版社,1992.WEN Shizhu,YANG Peiran.Elastohydrodynamic Lubrication [M].Beijing:Tsinghua University Press,1992.
[8] 杨沛然.流体润滑数值分析[M].北京:国防工业出版社,1998.YANG Peiran.Numerical Analysis of Fluid Lubrication [M].Beijing:National Defense Industry Press,1998.
[9] 黄平.润滑数值计算方法[M].北京:高等教育出版社,2012.HUANG Ping.Numerical Calculation Method of Lubrication [M].Beijing:Higher Education Press,2012.
[10] 王兆强.斜盘式柱塞行走马达配流盘的球冠形微观织构引起缸体振动的机理研究[D].杭州:浙江大学,2014.WANG Zhaoqiang.Study on the Vibration of Axial Piston Swash Plate Type Travelling Motor's Cylinder Caused by Micro-hemispherical Texture on Its Port Plate [D].Hangzhou:Zhejiang University,2014.
[11] ABDALLAH A,ELSHARKAWY,LOTFI H,et al.Hydro-dynamic Lubrication of Porous Journal Bearings Using a Modified.Brinkman-extended Darcy Model [J].Tribology International,2001,34(11):767-777.
[12] 卢义敏,周华,杨华勇.纯水液压泵配流盘的仿真研究[J].液压与气动,2005,(7):56-57.LU Yimin,ZHOU Hua,YANG Huayong.Simulation Research on Pure Water Hydraulic Pump Distribution Plate [J].Chinese Hydraulics & Pneumatics,2005,(7):56-57.