摘要
以欧美亚橡胶有限公司ET15膜式空气弹簧为研究对象,搭建空气弹簧静特性试验测试系统,设计了空气弹簧静特性实验方案。通过试验得到空气弹簧位移与弹簧出力曲线关系,根据标准中的定义计算弹簧位移与静刚度、弹簧位移与有效面积的曲线关系。试验结果表明:等温等压试验与断开气源试验有很大不同。
Taking the EAA RUBBER IND ET15 diaphragm air spring as the research object,the experimental system for static characteristic of diaphragm air spring was built and the experimental scheme for static characteristic of diaphragm air spring was designed. The relationship between the displacement of air spring and the force of air spring were obtained by experiments. The relationship curves of spring displacement-static stiffness,spring displacement-effective area were calculated based on the definitions of National Standards. The experimental results show that the isothermal isobaric experiment is quite different from the close gas source experiment.
引文
[1]邱文军.空气悬架力学特性及主动控制策略的研究[D].长春:吉林大学,2014.
[2]夏晶晶.基于空气弹簧充放气特性的汽车运行姿态控制[J].江苏大学学报(自然科学版),2013,34(1):13-16.
[3]颜新鹏,王炯.基于模糊PID控制的空气弹簧振动特性研究[J].重庆理工大学学报(自然科学),2017(9):69-73,157.
[4]李静,丁明慧,李立刚,等.基于活塞形状的空气弹簧动特性分析与参数优化[J].吉林大学学报(工学版),2018,48(2):355-363.
[5]李仲兴,高明宏,徐兴,等.应用机电相似理论的带附加气室空气弹簧系统的建模与分析[J].重庆理工大学学报(自然科学),2013,27(7):63-67,151.
[6]张泽华,尹文生.双腔室空气弹簧橡胶膜片刚度的研究[J].振动与冲击,2018(7):204-210.
[7]高红星,池茂儒,朱旻昊,等.空气弹簧模型研究[J].机械工程学报,2015,51(4):108-115.
[8]王家胜,朱思洪.车用膜式空气弹簧静特性试验研究[J].机械设计与制造,2010(11):107-108.
[9] GB/T13061—2017,商用车空气悬架用空气弹簧技术规范[S].
[10] GB/T13061—1991,汽车悬架用空气弹簧橡胶气囊[S].