摘要
采用酸碱腐蚀后高温氧化的方法对NiCrFe金属载体表面进行预处理,并应用溶胶-凝胶法制备(Al2O3)(K2O)(SiO2)2玻璃陶瓷涂层,通过扫描电镜(SEM)和X射线粉末衍射(XRD)对载体和涂层进行形貌分析.实验证明,该玻璃陶瓷涂层的涂覆可以有效的提高比表面积.
The NiCrFe metallic substrate surface were pretreated using the method of hightemperature oxidation after acid and alkali corrosion,and the(Al2O3)(K2O)(SiO2)2 glass ceramic coating was prepared by sol-gel method.The morphology analysis on carrier and coating were carried out by scanning electron microscopy(SEM)and X-ray powder diffraction(XRD).Experimental results show that the glass ceramic coating can effectively improve the ratio of surface area.
引文
[1]王建昕,傅立新.汽车排气污染治理及催化转化器[M].北京:化学工业出版社,2000:220-245.(Wang Jianxin,Fu Xinli.Automobile Exhaust Pollution and Catalytic Converters[M].Beijing:Chemical Industry Press,2000:220-245.)
[2]吴晓东,陈华鹏,徐鲁华,等.金属载体表面氧化及预载处理对氧化铝涂层结合性能的影响[J].中国稀土学报,2002,20(Z1):68-72.(Wu Xiaodong,Chen Huapeng,Xu Luhua,et al.Effect of Surface Oxidation and Precoating on Combination Performance of Al2O3 Washcoat on Metallic Substrate[J].Journal of the Chinese Rare Earth Society,2002,20(Z1):68-72.)
[3]魏伟,史庆南.汽车尾气催化净化器用金属载体的研究进展[J].汽车科技,2001(6):4-6.(Wei Wei,Shi Qingnan.Research of Carrier Used in Automotive Exhaust Gas Purifying System[J].Automobile Science and Technology,2001(6):4-6.)
[4]陈颖,聂祚仁,周美玲,等.对La对FeCrAl合金箔材抗高温氧化性能的影响[J].材料保护,2002,35(8):34-36.(Chen Ying,Nie Zuoren,Zhou Meiling,et al.Effect of La on High Temperature Oxidation Resistance of FeCrAl Alloy Foils[J].Materials Protection,2002,35(8):34-36.)
[5]Agrafiotis C,Tsetsekou A,Leon I.Effect of Slurry Rheological Properties on the Coating of Ceramic Honeycombs with Yttria-Stabilized-Zirconia Washcoats[J].Journal of the American Ceramic Society,2000,83(5):1033-1038.
[6]Bemal S,Blanco G,Cifredo G,et al.Reducibility of Ceria-Lanthana Mixed Oxides under Temperature Programmed Hydrogen and Inert Gas Flow Conditions[J].Journal of Alloys and Compounds,1997,250(1/2):449-454.
[7]Agrafiotis C,Tsetsekou A.The Effect of Power Characteristics on Washcoat Quality.PartⅠ:Alumina Washcoats[J].Journal of the European Ceramic Society,2000,20(7):815-824.
[8]Conde A,Durn A,Damborenea J J.Polymeric Sol-Gel Coatings as Protective Layers of Aluminium Alloys[J].Progress in Organic Coatings,2003,46(4):288-296.
[9]Tanaka S,Mizukami F,Niwa S,et al.Preparation of Highly Dispersed Silica Supported Palladium Catalysts by a Complexing Agent-Assisted Sol-Gel Method and their Characteristics[J].Applied Catalysis A:General,2002,229(1):165-174.
[10]Perez V,Miachon S,Dalmon J A,et al.Preparation and Characterisation of a Pt/Ceramic Catalytic Membrane[J].Separation and Purification Technology,2001,25(1/2/3):33-38.
[11]Arefi-Khonsari F,Tatoulian M,Bretagnol F,et al.Processing of Polymers by Plasma Technologies[J].Surface and Coatings Technology,2005,200(1/2/3/4):14-20.
[12]Jung C K,Bae I S,Lee S B,et al.Development of Painting Technology Using Plasma Surface Technology for Automobile Parts[J].Thin Solid Films,2005,506:316-322.
[13]Venezia A M,Parola V L,Deganello G.Synergetic Effect of Gold in Au/Pd Catalysts during Hydrodesulfurization Reactions of Model Compounds[J].Journal of Catalysis,2003,215(2):317-325.
[14]王宇,卢安贤,张小福,等.高强度α-堇青石基玻璃陶瓷的析晶与力学性能[J].粉末冶金材料科学与工程,2007,12(2):117-122.(Wang Yu,Lu Anxian,Zhang Xiaofu,et al.Crystallization and Mechanical Properties of High Strengthα-Cordierite Glass-Ceramics[J].Materials Science and Engineering of Powder Metallurgy,2007,12(2):117-122.)
[15]Taruta S,Sakata M,Yamaguchi T,et al.Crystallization Process and some Properties of Novel Transparent Machinable Calcium-Mica Glass-Ceramics[J].Ceramics International,2008,34(1):75-79.
[16]吴闵.X射线衍射及应用[J].沈阳大学学报,1995,7(4):7-12.(Wu Min.X-Ray Diffraction and its Application[J].Journal of Shenyang University,1995,7(4):7-12.)
[17]牛晓巍,徐跃,王婧姝,等.NiCrFe金属上涂覆玻璃陶瓷涂层的结构和性能[J].稀有金属材料与工程,2011,40(1):96-100.(Niu Xiaowei,Xu Yue,Wang Jingshu,et al.Microstructure and Properties of Glass Ceramic Coating on the NiCrFe Metal Support[J].Metal Materials and Engineering,2011,40(1):96-100.)