摘要
新型FT针摆减速器和RV减速器都是采用封闭二级传动的一种新型针摆传动减速器,都具有结构紧凑、刚性高、振动低、低速运转区效率高等优良特性。二者的结构传动方式相似,传动性能较前几代减速器有很大的改善,传动效率也大幅提高。通过对FT455-81型样机和RV-160E-81-B-B型样机为例进行性能、价格等方面的对比,构建FT和RV减速器的三维模型,对其传动原理、传动特点、结构进行分析比较,阐述RV减速器和FT减速器的优缺点。找到两种减速器的适合应用场合。
The FT pin-cycloid reducer and RV reducer are new type of pin-cycloid transmission reducer with closed two stage transmission. The both type of reducer has the advantages of more compact structure,high rigidity,low vibration,high efficiency of low speed operation zone and so on. The structure of the two is similar in transmission mode,and the transmission performance is greatly improved compared with the previous generations of reducer and the transmission efficiency is also greatly higher. The FT455-81 prototype and RV-160 E-81-B-B prototype are taken as examples to compare the performance,price and other aspects.The 3D model of the FT and RV reducers is built. Its transmission principle,transmission characteristics and structure are analyzed and compared. The advantages and disadvantages of RV reducer and FT reducer are expounded. The suitable for application of the two reducer is found.
引文
[1]梁凯翔,王忠素,田士涛,等.摆线针轮行星减速器优化设计和仿真分析[J].机械传动,2017,41(3):155-159.
[2]SHIN J H,KIM C H,YUN P H,et al.Dual cycloid gear mechanism for automobile safety pretensioners[J].中南大学学报:英文版,2012,19(2):365-373.
[3]NIE S,HU J,LI B,et al.The modification optimization analysis of cycloid pin gear tooth profile of RV reducer[J].Machine Design&Research,2016.49-56.
[4]奚鹰,华滨滨,郑钰馨,等.机器人用高精度RV减速器曲轴误差[J].中国工程机械学报,2016,14(2):168-173.
[5]刘学翱,徐宏海.RV减速器三维参数化建模与虚拟装配[J].机械设计与制造,2015(4):133-136.
[6]张迎辉,肖君君,何卫东.机器人用RV减速器针摆传动啮合刚度计算[J].大连交通大学学报,2010,31(2):20-23.
[7]住友重机械工业株式会社.CYCLOID FC-T series产品样机[Z].东京:住友重机械工业株式会社,2011:32-65.
[8]帝人重机械工业株式会社.CYCLOID RV series产品样机[Z].东京:帝人重机械工业株式会社,2011:25-40.
[9]WU S,CHEN D,HE W,et al.Selection of RV-c cycloidal pin wheel reducer[J].Journal of Mechanical Transmission,2014:126-134.
[10]赵海鸣,王猛,张林林,等.RV减速器静态回差分析及误差分配研究[J].天津大学学报(自然科学与工程技术版),2016,49(2):164-170.
[11]张丰收,祝鹏,冯崇,等.RV减速器传动精度的研究[J].机械设计,2015(4).82-90.