水平连铸TP2铜管表面裂纹产生原因及控制措施

详细信息    查看全文 | 推荐本文 |

英文篇名：Formation Mechanism and Control Measures on Surface Cracks on TP2 Copper Tube in Horizontal Continuous Casting 作者：刘阳 ; 刘劲松 ; 张士宏 ; 李海红 ; 吴金虎 英文作者：Liu Yang;Liu Jinsong;Zhang Shihong;Li Haihong;Wu Jinhu;School of Material Science and Engineering,Shenyang Ligong University;Institute of Metal Research,Chinese Academy of Sciences; 关键词：水平连铸 ; 表面裂纹 ; TP2铜管 ; 形成机理 ; 控制措施 英文关键词：Horizontal Continuous Casting;;Surface Crack;;TP2 Copper Tube;;Formation Mechanism;;Countermeasures 中文刊名：TZZZ 英文刊名：Special Casting & Nonferrous Alloys 机构：沈阳理工大学材料科学与工程学院;中国科学院金属研究所; 出版日期：2016-09-20 出版单位：特种铸造及有色合金 年：2016 期：v.36;No.282 语种：中文; 页：TZZZ201609026 页数：5 CN：09 ISSN：42-1148/TG 分类号：82-86

摘要

研究了水平连铸生产中TP2铜管表面裂纹缺陷,采用化学成分分析、组织分析、扫描电镜断口分析和能谱分析等方法,分析了表面裂纹形成的原因并提出裂纹控制的措施。根据裂纹产生原因,分别从熔炉纯净度、铸造模具和铸造工艺等方面进行严格控制,明显减少了铜管表面裂纹。
        Surface cracks on TP2 copper tube in horizontal continuous casting could reduce the final products rate.The formation mechanism of surface cracks on horizontal continuous casting TP2 copper tube and its countermeasures were presented by chemical composition analysis,microstructure observation and SEM,EDS.Based on formation mechanism of crack,through improving purity of furnace and mould design,casting process,surface crack on the copper tube can be eliminated obviously.

引文

[1]MEI J,LIU X H,XIE J X.Microstructure and mechanical properties of BFe10cupronickel alloy tubes fabricated by a horizontal continuous casting with heating-cooling combined mold technology[J].International Journal of Minerals,Metallurgy and Materials,2012,19(4),339-347.
    [2]洪正军.铸轧法在铜盘管加工工艺中的应用[J].湖南冶金,2004,32(5):39-41.
    [3]李耀群,易茵菲.现代铜盘管生产技术[M].北京:冶金工业出版社,2005.
    [4]杨忠,张鲜华.TP2热轧板分层开裂的原因分析[J].铜加工,2012,125(1):45-47.
    [5]陈园.水平连铸同步器齿环铸造工艺缺陷的研究[D].武汉:湖北工业大学,2012.
    [6]肖寒,张士宏,张海渠,等.TP2铜管坯水平连铸表面裂纹研究[J].特种铸造及有色合金,2007,27(11):864-866.
    [7]周文龙,张士宏.铸轧法与挤压法生产TP2铜管组织和性能对比分析[J].锻压装备与制造技术,2004,34(1):35-37.
    [8]YAN Z M,LI X T,QI K,et al.Study on horizontal electromagnetic continuous casting of CuNi10Fe1Mn alloy hollow billets[J].Material and Design,2009,30(6):2 072-2 076.
    [9]陈进方.TP2铜管坯水平连铸工艺及缺陷研究[J].上海有色金属,2009,30(3):110-113.
    [10]马得江.磷脱氧铜TP2圆锭熔铸工艺研究[J].铜业工程,2015,134(4):9-11,19.
    [11]曹秀兰,高双玲.H65黄铜热轧裂边原因及组织分析[J].铜加工,2011,121(1):40-44.
    [12]SHOU W B,YI D Q,LIU H Q,et al.Effect of grain size on the fatigue crack growth behavior of 2524-T3aluminum alloy[J].Archives of Civil and Mechanical Engineering,2016,16(3),304-312.
    [13]王云龙,潘伊娜.浅谈水平连铸TP2紫铜管坯的工艺制度[J].有色金属加工,2009,38(6):25-27.
    [14]王云龙,俞国强,周俊芳.水平连铸铜液泄漏事故分析及预防[J].特种铸造及有色合金,2009,29(6):537-539.