伺服电机定量泵驱动的片烟预压打包机研究
详细信息 查看官网全文
- 英文论文题名：Preload Balers Study Sheet Tobacco Servo Motor Driven Dosing Pumps
- 论文作者：崔建军 ; 刘洪标 ; 陈劲松 ; 沈磊
- 英文论文作者：CUI Jianjun ; LIU Hongbiao ; CHEN Jinsong ; SHEN Lei ; Hunan Tobacco Leaf Redrying Co. ; Ltd ; Kunming Fengdong New Technology Group Development Co. ; Ltd
- 年：2016
- 作者机构：湖南烟叶复烤有限公司;昆明风动新技术集团发展有限公司;
- 论文关键词：液压系统 ; 伺服电机 ; 打包机 ; 控制技术
- 英文论文关键词：hydraulic system ; servo motor ; baler ; control technology
- 会议召开时间：2016-12-01
- 会议录名称：中国烟草学会2016年度优秀论文汇编——烟草工业主题
- 语种：中文
- 分类号：TS43
- 学会代码：ZGYG
- 学会名称：中国烟草学会
- 页数：4
- 文件大小：776k
- 原文格式：D
摘要
目前片烟预压打包机主要采用传统的异步电机定量泵液压系统,存在能耗高、噪声大、预压压力难以提高等问题。为了改善性能,提出了伺服电机定量泵驱动的片烟预压打包机系统方案,以及位置-流量-压力多环复合的控制策略。分别对传统型和伺服型打包机进行了试验研究,结果表明,后者在节能降噪等方面具有较好的优势,而且预压压力能够满足不同等级烟叶的打包需求。
At present, the traditional prepress sheet tobacco baler, which using induction motor quantitative pump hydraulic system, has some inadequacies such as high energy consumption, noisy and the pre-pressure is difficult to improve. In order to solve these problems, the paper presents a novel prepress sheet tobacco baler system using servo motor driven dosing pumps and a polycyclic control strategy based on location flow and pressure. The experimental results show that the pre-pressure can meet the needs of different grades of tobacco packaging and the performance of energy saving and noise reduction is improved.
At present, the traditional prepress sheet tobacco baler, which using induction motor quantitative pump hydraulic system, has some inadequacies such as high energy consumption, noisy and the pre-pressure is difficult to improve. In order to solve these problems, the paper presents a novel prepress sheet tobacco baler system using servo motor driven dosing pumps and a polycyclic control strategy based on location flow and pressure. The experimental results show that the pre-pressure can meet the needs of different grades of tobacco packaging and the performance of energy saving and noise reduction is improved.
引文
[1]彭天好,徐兵,杨华勇.变频液压技术的发展及研究综述[J].浙江大学学报(工学版),2004,38(2):215-221.
[2]权龙,Helduser S.基于可调速电动机的高动态节能型电液动力源[J].中国机械工程,2003,14(7):606-609.
[3]权龙,李凤兰,王祥.伺服电动机定量泵驱动差动液压缸系统效率的研究[J].中国电机工程学报,2006,26(8):93-98.
[4]张友根.注塑机交流伺服电机驱动液压泵系统的设计研究[J].流体传动与控制,2010,43:9-15.
[5]HE Yudong,WANG Junzheng,HAO Renjian.Adaptive Robust Dead-Zone Compensation Control of Electro-Hydraulic Servo Systems with Load Disturbance Rejection[J].J Syst Sci Complex,2015,28:341-359.
[6]Ali Tivay,Mohammad Zareinejad,S.Mehdi Rezaei,Keivan Baghestan.A switched energy saving position controller for variable-pressure electro-hydraulic servo systems[J].ISA Transactions,2014,53:1297-1306.
[7]Hongmei Liu,Dawei Liu,Chen Lu,and Xuan Wang.FAULT DIAGNOSIS OF HYDRAULIC SERVO SYSTEM USING THE UNSCENTED KALMAN FILTER[J].Asian Journal of Control,2015,17:1-13.
[2]权龙,Helduser S.基于可调速电动机的高动态节能型电液动力源[J].中国机械工程,2003,14(7):606-609.
[3]权龙,李凤兰,王祥.伺服电动机定量泵驱动差动液压缸系统效率的研究[J].中国电机工程学报,2006,26(8):93-98.
[4]张友根.注塑机交流伺服电机驱动液压泵系统的设计研究[J].流体传动与控制,2010,43:9-15.
[5]HE Yudong,WANG Junzheng,HAO Renjian.Adaptive Robust Dead-Zone Compensation Control of Electro-Hydraulic Servo Systems with Load Disturbance Rejection[J].J Syst Sci Complex,2015,28:341-359.
[6]Ali Tivay,Mohammad Zareinejad,S.Mehdi Rezaei,Keivan Baghestan.A switched energy saving position controller for variable-pressure electro-hydraulic servo systems[J].ISA Transactions,2014,53:1297-1306.
[7]Hongmei Liu,Dawei Liu,Chen Lu,and Xuan Wang.FAULT DIAGNOSIS OF HYDRAULIC SERVO SYSTEM USING THE UNSCENTED KALMAN FILTER[J].Asian Journal of Control,2015,17:1-13.