曲轴新增生产线检测方案的优化
详细信息 查看官网全文
- 英文论文题名：The Optimization of Detection Project in the New Added Crankshaft Production Line
- 论文作者：吴烨 ; 夏维 ; 张立平
- 英文论文作者：Wu Ye ; Xia Wei ; Zhang Liping ; Dongfeng Peugeot Citroen Automobile Co. ; Ltd.
- 年：2016
- 作者机构：神龙汽车有限公司技术中心;
- 论文关键词：检测设备利用率 ; 检测工时 ; 实时监控 ; 首检 ; 成本
- 英文论文关键词：utilization rate of testing equipment ; testing man-hours ; real-time monitoring ; the first inspection ; cost
- 会议召开时间：2016-10-26
- 会议录名称：2016中国汽车工程学会年会论文集
- 英文会议录名称：Proceedings of 2016 SAE-China Congress
- 语种：中文
- 分类号：U468.2
- 学会代码：QCGC
- 会议名称：2016中国汽车工程学会年会暨展览会
- 会议地点：中国上海
- 主办单位：中国汽车工程学会
- 学会名称：中国汽车工程学会
- 页数：5
- 文件大小：1060k
- 原文格式：O
- 会议级别：全国
摘要
本文从分析工序检测设备利用率入手,通过计算各类检测设备满足实时监控所需的检测时间,以识别出风险点。最终制定出既能保证实时监控,又可成本最小化的投资方案。
The paper is based on utilization rate analysis of process Testing Equipment,by calculating the time of all kinds of testing equipment that meets the requirements of real-time monitoring,risk points are found out.Finally,the investment plan that but only ensures real-time monitoring but also minimizes cost has been worked out.
The paper is based on utilization rate analysis of process Testing Equipment,by calculating the time of all kinds of testing equipment that meets the requirements of real-time monitoring,risk points are found out.Finally,the investment plan that but only ensures real-time monitoring but also minimizes cost has been worked out.
引文