实验室用叶丝滚筒干燥机的研制

详细信息    查看官网全文

• 英文论文题名：Development of laboratory cut strip cylinder dryer
• 论文作者：熊安言 ; 于建春 ; 王二彬 ; 宋伟民 ; 苏东赢 ; 黄光富 ; 孙觅 ; 丁美宙
• 英文论文作者：XIONG Anyan ; YU Jianchun ; WANG Erbin ; SONG Weimin ; SU Dongying ; HUANG Guangfu ; SUN Mi ; DING Meizhou ; Technology Center ; China Tobacco Henan Industrial Co. ; Ltd. ; Xuchang Cigarette Factory ; China Tobacco Henan Industrial Co. ; Ltd.
• 年：2016
• 作者机构：河南中烟工业有限责任公司技术中心;河南中烟工业有限责任公司许昌卷烟厂;
• 论文关键词：滚筒 ; 叶丝干燥 ; 实验室 ; 筒壁温度 ; 滚筒转速 ; 感官质量 ; 烘箱法
• 英文论文关键词：Cylinder ; Cut strip drying ; Laboratory ; Cylinder wall temperature ; Cylinder's rotational speed ; Sensory quality ; Oven method
• 会议召开时间：2016-12-01
• 会议录名称：中国烟草学会2016年度优秀论文汇编——烟草工业主题
• 语种：中文
• 分类号：TS43
• 学会代码：ZGYG
• 学会名称：中国烟草学会
• 页数：7
• 文件大小：794k
• 原文格式：D

摘要

为解决实验室与制丝生产线不同叶丝干燥设备干燥叶丝的感官质量存在较大差异等问题,基于叶丝薄板滚筒干燥机工作原理,研制了一种实验室用叶丝滚筒干燥机。该干燥机由机架、烘丝筒、变频驱动系统、加热控温系统和排潮系统等部分组成。通过加热器、保温层和自动控温系统对烘丝筒壁温度进行调控;利用变频电机调节滚筒转速;通过排潮系统对干燥机进行排潮;将出料口与进料口合二为一,自行设计的机架结构便于烘丝筒翻转倾斜,实现快速出料。利用"黄金叶"(大金圆)配方叶丝,采用实验室用干燥机、电烘箱和生产线薄板滚筒干燥机(对照样)3种干燥方式对叶丝物理性能和卷烟感官质量进行对比试验。结果表明:采用实验室用干燥机,叶丝填充值为4.54 cm~3/g,介于烘箱法和对照样之间。与对照样相比,叶丝弹性、卷曲度和松散性接近,卷烟感官同质化率达68%,达到了卷烟感官同质化要求。采用烘箱法,叶丝填充值最低,为4.02 cm~3/g,且卷烟样品感官质量稍差。实验室用干燥机与薄板滚筒干燥机的干燥效果接近,均优于电烘箱,可以满足实验室与制丝生产线干燥叶丝感官质量无差异的需求。
In order to simulate cut tobacco drying in a primary processing line exactly, a laboratory cut tobacco cylinder dryer was designed based on the working principle of thin plate cylinder dryer. The designed dryer was mainly composed of a bracket, a drying cylinder, a frequency conversion drive system, a heating temperature control system and a moisture exhaust system. Cylinder wall temperature was controlled via a heater, a heat insulation layer and an automatic temperature control system; cylinder's rotational speed was regulated by a frequency conversion motor; and the wet air was exhausted through moisture exhaust system. The inlet and outlet of tobacco were combined into one, and the bracket structure was designed so as to facilitate drying cylinder tipping and accelerate tobacco discharging. Taking the cut rags of brand"Gold leaf(Dajinyuan)" as experimental material, three drying devices, laboratory cylinder dryer, electric oven and thin plate cylinder dryer(the control), were compared in terms of physical properties and sensory quality of dried tobacco. The results showed that:1)The filling value of cut strips dried by laboratory cylinder dryer was 4.54 cm_3/g and that of the control was 4.62 cm_3/g, the elasticity, crimpness and loosening degree of the two were close, and the consistent rate of sensory quality between them reached 68%, which satisfied the requirements of sensory quality consistency for cigarettes. 2) The filling value of cut strips dried by electric oven was 4.02 cm3/g, and the sensory quality of the same was slightly worse. 3)The performance of laboratory cylinder dryer was close to that of thin plate cylinder dryer.

引文

[1]刘钟祥.论卷烟产品开发与改进[J].烟草科技,1997(1):13-15.LIU Zhongxiang.On the development and improvement of cigarette products[J].Tobacco Science&Technology,1997(1):13-15.
    [2]王宗英,彭军仓,徐磊,等.两种干燥工艺下叶丝加工质量的对比分析[J].烟草科技,2012(11):5-9.WANG Zongying,PENG Juncang,XU Lei,et al.Comparison of processing quality of cut strips dried with two different technologies[J].Tobacco Science&Technology,2012(11):5-9.
    [3]罗登山,姚光明,刘朝贤.中式卷烟加工工艺技术探讨[J].烟草科技,2005(5):4-8.LUO Dengshan,YAO Guangming,LIU Chaoxian.Discussion on process technology in chinese type cigarette production[J].Tobacco Science&Technology,2005(5):4-8.
    [4]姚光明,乔学义,申玉军,等.烤烟叶片在不同叶丝干燥工序中叶丝填充值和整丝率的变化[J].河南农业科学,2011,40(2):69-73.YAO Guangming,QIAO Xueyi,SHEN Yujun,et al.The changes of cut tobacco filling power and whole cut rate of flue-cured tobacco leaf in the cut tobacco drying process[J].Journal of Henan Agricultural Sciences,2011,40(2):69-73.
    [5]华一崑,资文华,向成明,等.不同干燥方式对卷烟产品品质影响初探[J].云南烟草,2008(1):42-47.HUA Yikun,ZHI Wenhua,XIANG Chengming,et al.Effect of different drying methods on the quality of cigarette products[J].Yunnan tobacco,2008(1):42-47.
    [6]江威,冯志斌,李焕威.实验型气流干燥机的应用评价[J].食品与机械,2012(4):149-153.JIANG Wei,FENG Zhibin,LI Huanwei.Evaluation of application on experimental pneumatic dryer[J].Food&machinery,2012(4):149-153.
    [7]陈一,张耀华,丁碧军,等.实验用便携式烟丝干燥盒:中国,ZL200820066435.6[P].2009-03-18.CHENG Yi,ZHANG Yaohua,DING Bijun,et al.Portable box for drying experiment:china,ZL200820066435.6[P].2009-03-18.
    [8]朱文魁,段鹍,陈良元,等.一种烟丝热风变温干燥装置及其变温干燥试验方法:中国,ZL201410206839.0[P].2014-09-03.ZHU Wenkui,DUAN Kun,CHENG Liangyuan,et al.A hot air drying device and tobacco drying test method:china,ZL201410206839.0[P].2014-09-03.
    [9]李斌,房倚天,刘泽,等.烟草复合传热式小型滚筒干燥装置:中国,ZL200910064373.4[P].2012-02-08.LI Bing,FANG Yitian,LIU Zhe,et al.Tobacco composite heat transfer type small drum drying device:china,ZL200910064373.4[P].2012-02-08.
    [10]陈良元.卷烟生产工艺技术[M].郑州:河南科学技术出版社,2002.CHEN Liangyuan.Cigarette production process technology[M].Zhengzhou:Henan science and Technology Press,2002.
    [11]王宝德.一种茶叶杀青机:中国,ZL201310247616.4[P].2015-05-13.WANG Baode.A tea steaming machine:china,ZL201310247616.4[P].2015-05-13.
    [12]国家烟草专卖局.卷烟工艺测试与分析大纲[M].成都:四川大学出版社,2004.State Tobacco Monopoly Administration.Testing and analysis of cigarette process[M].Chengdu:Sichuan University press,2004.
    [13]国家烟草专卖局.卷烟工艺规范[M].北京:中央文献出版社,2003.State Tobacco Monopoly Administration.Process specification for cigarette[M].Beijing:Central document press,2003.
    [14]YC/T 198—2006卷烟品牌许可生产质量保障通则[S].YC/T 198-2006 General rule of quality assurance for licensed production of cigarette brand[S].
    [15]YC/T 138—1998烟草及烟草制品感官评价方法[S].YC/T 138-1998 Tobacco and tobacco products Sensory evaluation method[S].