发动机零部件防锈技术研究
详细信息 查看官网全文
- 论文作者：梁彦勇 ; 胡星星
- 年：2016
- 作者机构：海马汽车有限公司;
- 论文关键词：发动机 ; 钢、铁类材料零部件 ; 防锈技术 ; 机加工
- 英文论文关键词：Engine ; Iron and steel parts ; Technology of against rusty ; Machining
- 会议召开时间：2016-10-18
- 会议录名称：第十三届河南省汽车工程科技学术研讨会论文集
- 英文会议录名称：The Thirteenth Scientific Research and Academic Congress Proceedings of SAE-Henan
- 语种：中文
- 分类号：U464.13
- 学会代码：HQGX
- 会议名称：第十三届河南省汽车工程科技学术研讨会
- 会议地点：中国河南信阳
- 主办单位：河南省汽车工程学会
- 学会名称：河南省汽车工程学会
- 页数：3
- 文件大小：337k
- 原文格式：O
- 会议级别：地方
摘要
钢铁类零部件是发动机上使用最多的零部件,但由于其本身容易生锈的特点,每年会给国家造成大量的经济损失,因此防锈显得尤为重要。本文主要从制造过程中防锈、零部件本身长期防锈、仓储过程防锈和运输过程防锈等几个方面进行阐述,简单介绍了发动机零部件常用的防锈技术。
Most parts used on engines are iron and steel parts,which also result in a large amount of economic loss every year,because of the characteristic that the materials easily get to rust.Thus,it is particularly important to protect the parts against getting rusty.This paper mainly elaborates the common techniques to prevent engines' parts from being rusty as following aspects:the anti-rust technology of parts themselves for a long term;the components' anti-rust protection during manufacturing,storing and transportation processes etc..
Most parts used on engines are iron and steel parts,which also result in a large amount of economic loss every year,because of the characteristic that the materials easily get to rust.Thus,it is particularly important to protect the parts against getting rusty.This paper mainly elaborates the common techniques to prevent engines' parts from being rusty as following aspects:the anti-rust technology of parts themselves for a long term;the components' anti-rust protection during manufacturing,storing and transportation processes etc..
引文
[1]何育麟.发动机零件生产过程中的防锈技术[J],柴油机设计与制造,2010.
[2]屠振密.电镀合金原理与工艺[M],北京国防工业出版社,1998.
[3]阎洪.金属表面处理新技术.北京:冶金工业出版社,1996.
[2]屠振密.电镀合金原理与工艺[M],北京国防工业出版社,1998.
[3]阎洪.金属表面处理新技术.北京:冶金工业出版社,1996.