响应面分析法优化给水污泥基质吸附除磷工艺
详细信息 查看官网全文
- 英文论文题名：Optimization of the adsorption of phosphorus by water plant sludge substrate using Response Surface Methodology
- 论文作者：马宏林 ; 贺涛 ; 魏东洋 ; 李杰 ; 孙三祥 ; 洪雷 ; 许振成
- 英文论文作者：Ma Honglin ; He Tao ; Hong Lei ; Wei Dongyang ; Li Jie ; Xu Zhencheng ; School of Environmental and Municipal Engineering ; Lanzhou Jiaotong University ; South China Institute of Environmental Sciences.MEP
- 年：2014
- 作者机构：兰州交通大学环境与市政工程学院;环境保护部华南环境科学研究所;
- 论文关键词：给水污泥基质 ; 磷 ; 吸附 ; 单因素实验 ; 响应面法
- 英文论文关键词：Water plant sludge substrate ; Phosphorus ; Single factor experiment ; Response surface method
- 会议召开时间：2014-09-25
- 会议录名称：第二届全国流域生态保护与水污染控制研讨会论文集
- 语种：中文
- 分类号：X703;O647.3
- 学会代码：HJKP
- 会议名称：第二届全国流域生态保护与水污染控制研讨会
- 会议地点：中国宁夏银川
- 主办单位：中国环境科学学会、环境保护部南京环境科学研究所、宁夏环境科学学会
- 学会名称：中国环境科学学会
- 页数：1
- 文件大小：465k
- 原文格式：D
- 会议级别：全国
摘要
以给水污泥基质为吸附材料,对模拟含磷废水进行了吸附研究。在单因素实验基础上,选取投加量、p H、粒径三种因素为影响因子,以磷的去除率为响应值,采用Box-Behnken响应面分析法(BBD)研究了三种因素对磷去除率的影响以及各因素间的交互作用。建立二次多项式回归方程预测模型,分析回归方程,得出给水污泥基质除磷的优化条件。结果表明,回归方程极显著,模型拟合性好。给水污泥基质最佳除磷工艺条件为投加量3.88 g/L,p H=3.00,粒径1.00 mm,在该工艺条件下,磷的去除率可达95.13%.通过实验验证,实验值与预测值接近,误差仅为2.02%。
The water plant sludge substrate was used to investigate the adsorption of phosphorus in simulated phosphorus containing wastewater as the absorbent.Based on the single factor experiment,using Box-Behnken design matrix in response surface methodology,dosage,p H and particle size were perfectly employed to study interactiveeffects of different factors and optimization of phosphorus removal.A predictive model of polynomial quadratic equation was founded as well as optimum level values were obtained through analyzing the quadratic equation.The results showed that the regression equation was highly significant and the model can be utilized to exactly fit the design space.The optimum conditions of phosphorus removal were determined to be 3.88 g/L dosage p H=3.00,1.00 mm particle size,the removal rate of phosphorus was up to 95.13% under the optimal conditions.The experimental values were in good consistent with the predicted results of the model with only2.02% deviation.
The water plant sludge substrate was used to investigate the adsorption of phosphorus in simulated phosphorus containing wastewater as the absorbent.Based on the single factor experiment,using Box-Behnken design matrix in response surface methodology,dosage,p H and particle size were perfectly employed to study interactiveeffects of different factors and optimization of phosphorus removal.A predictive model of polynomial quadratic equation was founded as well as optimum level values were obtained through analyzing the quadratic equation.The results showed that the regression equation was highly significant and the model can be utilized to exactly fit the design space.The optimum conditions of phosphorus removal were determined to be 3.88 g/L dosage p H=3.00,1.00 mm particle size,the removal rate of phosphorus was up to 95.13% under the optimal conditions.The experimental values were in good consistent with the predicted results of the model with only2.02% deviation.
引文