第十三、十四届国际铁合金会议上发布的新技术新设备简介
详细信息 查看官网全文
- 英文论文题名：BRIEF INTRODUCTION OF NEW TECHNOLOGIES AND EQUIPMENT REPORTED ON THE THIRTEENTH ANDFOURTEENTHINTERNATIONAL FERROALLOYS CONGRESS
- 论文作者：王海娟 ; 韩培伟 ; 储少军
- 英文论文作者：Wang Haijuan ; Han Peiwei ; Chu Shaojun ; School of Metallurgical and Ecological Engineering ; University of Science and Technology Beijing
- 年：2016
- 作者机构：北京科技大学冶金与生态工程学院;
- 会议召开时间：2016-11-10
- 会议录名称：2016（首届）全国铁合金热点难点技术交流会论文集
- 语种：中文
- 分类号：TF64
- 学会代码：GYBW
- 会议名称：2016（首届）全国铁合金热点难点技术交流会
- 会议地点：中国内蒙古集宁
- 主办单位：新冶集团资源应用与合金材料事业部、《中国冶金》编辑部
- 学会名称：北京钢研柏苑出版有限责任公司
- 页数：8
- 文件大小：638k
- 原文格式：D
- 会议级别：全国
摘要
本文主要介绍第十三届和第十四届国际铁合金会议上报道的一些铁合金生产相关的新技术、先进工艺和先进设备。同时,对国外铁合金厂采取的部分节能环保的举措也进行了简要介绍。
A brief introduction has been made by the present authorson the new technologies, novel processes as well as the progressive equipment reported on the thirteenth and fourteenth international ferroalloys congress(INFACON XIII and INFACON XIV).Meanwhile,some goodmethods of energy conservation and environment protection used by international plants were summarized and reported as well.
A brief introduction has been made by the present authorson the new technologies, novel processes as well as the progressive equipment reported on the thirteenth and fourteenth international ferroalloys congress(INFACON XIII and INFACON XIV).Meanwhile,some goodmethods of energy conservation and environment protection used by international plants were summarized and reported as well.
引文
[1]A.Heikkila,J.Pussinen,O.Mattila,T.Fabritius.Effect of coke’s texture on electrical behavior.Proceedings of the 13th International Ferroalloys Congress,2013,p.511-517.
[2]Zh.Nurmukhanbetov,O.Privalov,L.Prokopyev.Evaluation of gaseous dynamic behavior of raw materials and charge for HC ferrochrome production.Proceedings of the 13th International Ferroalloys Congress,2013,p.535-542.
[3]J.P.Beukes,B.W.Neizel,E.L.J.Kleynhans.The influence of Ca CO3 addition and clay binder selection on electricity efficiency and other operational aspects during pre-reduction of pelletised chromite.Proceedings of the 13th International Ferroalloys Congress,2013,p.543-552.
[4]R.Degel,T.Germershausen,R.N?rthemann,M.K?neke.Innovative electric smelter solutions of the SMS GROUP for the ferro-alloys and Si-metal industry.Proceedings of the 13th International Ferroalloys Congress,2013,p.291-305.
[5]A.Piet Jonker.Implementation of Tenova pre-heating technology at JSC Kazchrome.Proceedings of the 14th International Ferroalloys Congress,2015,p.48-51.
[6]T.Germershausen,J.Bader,J.Reichel,U.Gerike,Innovations in ferroalloys process technologies.Proceedings of the 13th International Ferroalloys Congress,2013,p.335-346.
[7]P.Cowx,R.Nordhagen,M.Kadkhodabeigi,et al.The use of fine water sprays to suppress fume emissions when casting refined ferromanganese.Proceedings of the 14th International Ferroalloys Congress,2015,p.81-90.
[8]郁鸿超,王海娟,储少军等。引入CO2对吹氧法生产中低碳铬铁的作用,第23届全国铁合金学术研讨会,银川,101-107页,宁夏,2014.09.17-21。
[9]H.C Yu,H.J.Wang,S.J Chu.Evaluation on heat and materials balance of CO2 involved in converter process for M-LCFe Cr production.Proceedings of the 14th International Ferroalloys Congress,2015,p.58-64.
[10]王海娟,张烽,汪晓今,Per-?ke Lundstr?m。转炉吹炼过程引入水蒸气冶炼中低碳锰铁和中低碳铬铁。铁合金,2012年第2期,p.1-4。
[11]M.I.Gasik,M.M.Gasik.Vaccum-thermal method of deep refining of ferrochromium in solid state.Proceedings of the 14th International Ferroalloys Congress,2015,p.44-47.
[12]J.Safarian and L.Kolbeinsen.Purity requirements for Mn alloys for producing high manganese TRIP and TWIP steels.Proceedings of the 13th International Ferroalloys Congress,2013,p.175-183.
[13]S.Mostaghel1,L.So1,M.Cramer1,et al.Slag atomising technology:unlocking real value.Proceedings of the 14th International Ferroalloys Congress,2015,p.166-173.
[14]R.Degel,T.Germershausen,R.Northemann,M.Koneke.Innovative electric smelter solutions of the SMS group for the ferroalloys and Si-metal industry.Proceedings of the 13th International Ferroalloys Congress,2013,p.291-305.
[15]P.Vesterberg,K.Beskow,C-J Rick.Granulation of ferroalloys–Results from industrial operations and comparative study on fines generation.Proceedings of the 13th International Ferroalloys Congress,2013,p.65-72.
[16]王海娟,谭晓峰,Per-?ke Lundstr?m。一种新型铁合金液态金属浇铸成型方式。铁合金,2012年第6期,p.16-20。
[17]D.T.Jordan,C.J.Hockaday.Development of a camera-based Soderberg electrode slip measurement device.Proceedings of the 13th International Ferroalloys Congress,2013,p.417-425.
[18]A.Skjeldestad,M.Tangstad,L.Lindstad,B.Larsen.Temperature profiles in S?derberg electrodes.Proceedings of the 14th International Ferroalloys Congress,2015,p.327-337.
[19]T.Gerritsen,P.Tracy,F.Saber.Electrode voltage measurement in electric Furnaces:analysis of errorin measurement and calculation.Proceedings of the 14th International Ferroalloys Congress,2015,p.338-348.
[20]B.K.Mohanty.Electrode controller-leading to energy efficiency.Proceedings of the 14th International Ferroalloys Congress,2015,p.349-357.
[21]T.Schemmel,L.Schade,P.Kouzoupis,F.Beqiri,Magnesia-Carbon refractory lining for ferronickel converters-optimization and lining improvement at NEWCO FERRONIKELI(COSOVO).Proceedings of the13th International Ferroalloys Congress,2013,p.393-399.
[22]S.Konetschnik,A.S.Filzwieser,I.Filzwieser.The safe and efficient way of cooling:ILTEC-ionic liquid cooling technology.Proceedings of the 13th International Ferroalloys Congress,2013,p.369-376.
[23]S.Tambe,R.Stadler.Operating a DC electric arc furnace on a weak grid challenges and solutions.Proceedings of the 14th International Ferroalloys Congress,2015,p.676-681.
[24]C.J.Hockaday,Q.G.Reynolds,D.T.Jordan.Industrial demonstration of arc detection in a DC arc furnace.Proceedings of the 14th International Ferroalloys Congress,2015,p.682-688.
[25]M.P??talo,J.Raiskio.Dust emission minimizing,measuring and monitoring in Fe Cr-production in Tornio Works.Proceedings of the 14th International Ferroalloys Congress,2015,p.703-708.
[26]T.Michael,M.Arran,H.Mirza.A novel dry-based system for safe,hygienic energy recovery from ferroalloy furnace
[27]exhaust.Proceedings of the 14th International Ferroalloys Congress,2015,p.709-718.
[28]B.Monsen,L.Kolbeinse,S.Prytz et al.Possible use of natural gas for silicon or ferrosilicon production.Proceedings of the 13th International Ferroalloys Congress,2013,p.467-478.
[29]C.N.Harman,N.S.S.Rama Rao.A Process for the recovery of chromium and iron oxide in high carbon chrome slag to obtain chromium and iron in the form of saleable metal.Proceedings of the13th International Ferroalloys Congress,2013,p.103-108.
[2]Zh.Nurmukhanbetov,O.Privalov,L.Prokopyev.Evaluation of gaseous dynamic behavior of raw materials and charge for HC ferrochrome production.Proceedings of the 13th International Ferroalloys Congress,2013,p.535-542.
[3]J.P.Beukes,B.W.Neizel,E.L.J.Kleynhans.The influence of Ca CO3 addition and clay binder selection on electricity efficiency and other operational aspects during pre-reduction of pelletised chromite.Proceedings of the 13th International Ferroalloys Congress,2013,p.543-552.
[4]R.Degel,T.Germershausen,R.N?rthemann,M.K?neke.Innovative electric smelter solutions of the SMS GROUP for the ferro-alloys and Si-metal industry.Proceedings of the 13th International Ferroalloys Congress,2013,p.291-305.
[5]A.Piet Jonker.Implementation of Tenova pre-heating technology at JSC Kazchrome.Proceedings of the 14th International Ferroalloys Congress,2015,p.48-51.
[6]T.Germershausen,J.Bader,J.Reichel,U.Gerike,Innovations in ferroalloys process technologies.Proceedings of the 13th International Ferroalloys Congress,2013,p.335-346.
[7]P.Cowx,R.Nordhagen,M.Kadkhodabeigi,et al.The use of fine water sprays to suppress fume emissions when casting refined ferromanganese.Proceedings of the 14th International Ferroalloys Congress,2015,p.81-90.
[8]郁鸿超,王海娟,储少军等。引入CO2对吹氧法生产中低碳铬铁的作用,第23届全国铁合金学术研讨会,银川,101-107页,宁夏,2014.09.17-21。
[9]H.C Yu,H.J.Wang,S.J Chu.Evaluation on heat and materials balance of CO2 involved in converter process for M-LCFe Cr production.Proceedings of the 14th International Ferroalloys Congress,2015,p.58-64.
[10]王海娟,张烽,汪晓今,Per-?ke Lundstr?m。转炉吹炼过程引入水蒸气冶炼中低碳锰铁和中低碳铬铁。铁合金,2012年第2期,p.1-4。
[11]M.I.Gasik,M.M.Gasik.Vaccum-thermal method of deep refining of ferrochromium in solid state.Proceedings of the 14th International Ferroalloys Congress,2015,p.44-47.
[12]J.Safarian and L.Kolbeinsen.Purity requirements for Mn alloys for producing high manganese TRIP and TWIP steels.Proceedings of the 13th International Ferroalloys Congress,2013,p.175-183.
[13]S.Mostaghel1,L.So1,M.Cramer1,et al.Slag atomising technology:unlocking real value.Proceedings of the 14th International Ferroalloys Congress,2015,p.166-173.
[14]R.Degel,T.Germershausen,R.Northemann,M.Koneke.Innovative electric smelter solutions of the SMS group for the ferroalloys and Si-metal industry.Proceedings of the 13th International Ferroalloys Congress,2013,p.291-305.
[15]P.Vesterberg,K.Beskow,C-J Rick.Granulation of ferroalloys–Results from industrial operations and comparative study on fines generation.Proceedings of the 13th International Ferroalloys Congress,2013,p.65-72.
[16]王海娟,谭晓峰,Per-?ke Lundstr?m。一种新型铁合金液态金属浇铸成型方式。铁合金,2012年第6期,p.16-20。
[17]D.T.Jordan,C.J.Hockaday.Development of a camera-based Soderberg electrode slip measurement device.Proceedings of the 13th International Ferroalloys Congress,2013,p.417-425.
[18]A.Skjeldestad,M.Tangstad,L.Lindstad,B.Larsen.Temperature profiles in S?derberg electrodes.Proceedings of the 14th International Ferroalloys Congress,2015,p.327-337.
[19]T.Gerritsen,P.Tracy,F.Saber.Electrode voltage measurement in electric Furnaces:analysis of errorin measurement and calculation.Proceedings of the 14th International Ferroalloys Congress,2015,p.338-348.
[20]B.K.Mohanty.Electrode controller-leading to energy efficiency.Proceedings of the 14th International Ferroalloys Congress,2015,p.349-357.
[21]T.Schemmel,L.Schade,P.Kouzoupis,F.Beqiri,Magnesia-Carbon refractory lining for ferronickel converters-optimization and lining improvement at NEWCO FERRONIKELI(COSOVO).Proceedings of the13th International Ferroalloys Congress,2013,p.393-399.
[22]S.Konetschnik,A.S.Filzwieser,I.Filzwieser.The safe and efficient way of cooling:ILTEC-ionic liquid cooling technology.Proceedings of the 13th International Ferroalloys Congress,2013,p.369-376.
[23]S.Tambe,R.Stadler.Operating a DC electric arc furnace on a weak grid challenges and solutions.Proceedings of the 14th International Ferroalloys Congress,2015,p.676-681.
[24]C.J.Hockaday,Q.G.Reynolds,D.T.Jordan.Industrial demonstration of arc detection in a DC arc furnace.Proceedings of the 14th International Ferroalloys Congress,2015,p.682-688.
[25]M.P??talo,J.Raiskio.Dust emission minimizing,measuring and monitoring in Fe Cr-production in Tornio Works.Proceedings of the 14th International Ferroalloys Congress,2015,p.703-708.
[26]T.Michael,M.Arran,H.Mirza.A novel dry-based system for safe,hygienic energy recovery from ferroalloy furnace
[27]exhaust.Proceedings of the 14th International Ferroalloys Congress,2015,p.709-718.
[28]B.Monsen,L.Kolbeinse,S.Prytz et al.Possible use of natural gas for silicon or ferrosilicon production.Proceedings of the 13th International Ferroalloys Congress,2013,p.467-478.
[29]C.N.Harman,N.S.S.Rama Rao.A Process for the recovery of chromium and iron oxide in high carbon chrome slag to obtain chromium and iron in the form of saleable metal.Proceedings of the13th International Ferroalloys Congress,2013,p.103-108.