用户名: 密码: 验证码:
基于MSP430的奶牛发情期监测器的设计
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
本文主要阐述了奶牛发情期监测器设计过程中的计步原理,以及硬件电路的实现和软件驱动。并且成功的实现了数据从单片机与短距离无线发送芯片TX5000之间的串行通讯,解决了整个设计中的一个关键问题——奶牛运动过程中的计步问题。实现了单片机的低功耗模式3(LPM3)工作模式的设计,扩展了MSP430F1121A中Timer A的捕捉/比较模块以往仅仅测量软件程序、硬件事件之间的时间、系统频率的功能。文中巧妙的利用比较模块的中断使能接口,进行软件计数功能的实现。本文的特色之一为在硬件设计过程中加入中继器,进行信号转发,通过降低收发芯片的要求来降低成本;特别是在传统奶牛监测器的设计基础上,加入中继的改进,使得整个奶牛发情期监测器的系统成本大大降低,并且保证了数据无线收发的稳定性。除此之外软件设计过程中,采取了友好的管理界面,使得整个系统在实际应用过程中省时省力。
This article mainly elaborated in the work principle, the plan of electric circuit and drivers of monitor in design process, and it could be used to monitor the cow is in oestrus period or not. It can serial transmits data from SCM to short-range wireless transmitter TX5000 successfully. It resolved the key question in whole design—the count step problem when the cow was moving. It actualized the design to work under LPM3, and expanded the function about comparator/capture module of Timer_A in MSP430F1121A, which used to survey software procedure, hardware event time, and system frequency only. In this article, it applied interrupt enables COM in comparison module to counting steps by software ingeniously.
引文
[1]英国《观察报》,98.6。
    [2]The Data Sheet of MSP430x11x1,MSP430F11x1A Mixed Signal Microcontrollers(Rev.H)
    [3]MSP430系列16位超低功耗单片机原理与应用,沈建华,杨艳琴等主编。--北京:清华大学出版社,2004.11。
    [4]Texas Instruments Incorporated.Msp430x1xx Family User's Guide,2003.
    [5]MSP430系列单片机接口技术及系统设计实例,魏小龙编著。--北京:北京航空航天大学出版社。
    [6]Texas Instruments Incorporated.Msp430x4xx Family User's Guide,2003.
    [7]Arthur Musah DTMF-Controlled Remote Switching Applicatiom Using the MSP430 TEXAS INSTRUMENT,2003.
    [8]Robert Siwy Generatiom and Recognition of DTMF Signals with the Microcontroller MSP430TEXAS INSTRUMENT,1997
    [9]MSP430系列超低功耗单片机原理与系统设计,李智奇等编著。西安电子科技大。
    [10]Mixing C and Assenbler With the MSP430.
    [11]Inerfacing the 3-V MSP430 to 5-Circuits.
    [12]A Low-Cost Single-Phase Electricity Meter Using the MSP430C11x.
    [13]MSP430IAR Embedded Workbench~(TM)IDE User Guide..
    [14]Migration guide for EW430 2.10A
    [15]MSP430 WINDOWS WORKBENCH接口指南。
    [16]霍迎辉,张学习,基于RX5000/TX5000的无线收发电路,国外电子元器件[J]。2004(2):37-39。
    [17]RF Micro Devices,Inc.433MHz ASK/OO K ReceiverRX5000[Z],2001.
    [18]RF Micro Devices,Inc.433MHz ASK/OO K Transmit ter TX5000[Z],2001.
    [19]单片机外围电路设计,沙占有等主编,电子工业出版社。
    [20]A Study of the Control System with Inteligent Temperature Sensors,1999.8,ISTP
    [21]Inteligent Power Ics For Commercial、Industrial and Automotive Applications,Harris Corporation,2004
    [22]单片机外围器件实用手册,主编关德新等,北京航空航天大学出版社。
    [23]苏巧平,刘原,基于Zigbee技术的液晶显示动态排序密码键盘,自动化与仪器仪表[J],2008[2],2-3。
    [24]刘原,宋良图,基于Zigbee技术的农业信息无线数据传输[J],自动化与仪器仪表,2006(5):30-34。
    [25]J.Mis-ic,S.Shafi,V.B.Mis-ic,Performance of 802.15.4 beacon enabled PAN with uplink transmissions in non- saturation mode - access delay for finite buffers,in:Proc.Broad Nets 2004,San Jose,CA,2004,pp.416-425.
    [26]陈羽中,802.11 无线网络性能与公平性问题的研究博士学位论文.中国科学技术大学2005(11)。
    [27]印崧,夏萍,冯宾,陆圣梅,基于JN121的无线传感器网络节点扩展应用与设计,机械工程师[J],2008(3):74-75
    [28]崔光照,袁赞,刘沙,伍银波,一种基于JN5121的无线传感器网络节点的设计,汕头大学学报(自然科学版)[J],2008(2):43-47
    [29]JN-UG-3017-ZigBeeStackUserGuide-1v2[Z],pdf.JENNIC.
    [30]Jennie Data Sheet-JN5121,IEEE802.15.4/ZiBee Wireless Microcontrollers
    [31]Jennic Preliminary Data Sheet-JN5121-xxx-Myy IEEE802.15.4/ZigBee Module Family
    [32]数据采集与处理技术,马明建等著,西安交通大学出版社。
    [33]电子电路原理分析与仿真,许自图等著,电子工业出版社。
    [34]智能传感器系统设计与应用,沙占有等编著,电子工业出版社。
    [35]Protel 99SE 电路设计实用教程,余家春等编著,中国铁道出版社。
    [36]威海科益达电子有限公司,王飞,赵辉,姚小亮,兼容RS-232的点对点无线接口设计,今日电子[J],2008(1):87-91
    [37]前帆,占波.2005无线通信应用(国际)峰会在京召开[J].中国计算机用户,2005,(20)
    [38]石广源,杜军,李文昌,一种实用的RS-232电平监测电路,辽宁大学学报(自然科学版)[J],2008(1):17-18
    [39]R Jacob Baker,Harry W L i,David E Boyce.CMOS Circuite Design,Layout,and Simulation[M].2006,270-275.
    [40]曾坤江,Visual Studio 2005开发 ASP.NET2应用,铝加工[J],2008(1):27-28

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700