相山地区如意亭深钻CUSD4孔钻探技术研究
|
摘要
相山地区如意亭深钻CUSD4孔是中核集团龙灿工程下属子课题《相山基础地质研究》项目的第三个钻孔,设计孔深1600m。该钻孔于2016年8月12日开钻,至2016年12月6日,达到地质目的层位,终孔深度1435. 58m,平均台月效率406. 27m/台月。采用液动冲击器+P口径绳索取心钻具+锯齿型金刚石钻头组合钻进方法,在施工中取得良好使用效果,与同地区普通绳索取心钻进相比,钻进时效提高30%以上,钻头使用寿命提高20%以上。全孔岩心采取率98. 10%,破碎带岩心采取率达到99%。本文主要介绍了如意亭深钻CUSD4孔的施工工艺,可为类似地层钻孔提供借鉴。
The Ruyiting deep drilling hole CUSD4 in the Xiangshan area of Jiangxi Province is the third borehole of the sub-project of Longcan project of China National Nuclear Corporation( CNNC),"Xiangshan Basic Geological Research",with a designed depth 1600 m. It was started on 12 thAugust2016,reaching a final depth of 1435. 58 m,the geological target horizon on 6 thDecember 2016,implying an average drilling efficiency of 406. 27 meters per month. In this project,a combined drilling method was used,containing the P size( 122 mm in diameter) core drilling tool and saw-type diamond bit with the hydraulic impactor. This combined drilling method worked well during drilling process. As a result,the drilling efficiency increased by more than30%,service life of the bit increased by more than 20%,and the core recovery rate was 99% in broken formations. This paper presents the drilling technology implemented at the CUSD4 bore hole,which can provide some reference for drilling in similar strata.
The Ruyiting deep drilling hole CUSD4 in the Xiangshan area of Jiangxi Province is the third borehole of the sub-project of Longcan project of China National Nuclear Corporation( CNNC),"Xiangshan Basic Geological Research",with a designed depth 1600 m. It was started on 12 thAugust2016,reaching a final depth of 1435. 58 m,the geological target horizon on 6 thDecember 2016,implying an average drilling efficiency of 406. 27 meters per month. In this project,a combined drilling method was used,containing the P size( 122 mm in diameter) core drilling tool and saw-type diamond bit with the hydraulic impactor. This combined drilling method worked well during drilling process. As a result,the drilling efficiency increased by more than30%,service life of the bit increased by more than 20%,and the core recovery rate was 99% in broken formations. This paper presents the drilling technology implemented at the CUSD4 bore hole,which can provide some reference for drilling in similar strata.
引文
Dai Qingfeng,Fang Genxian,Lin Wanli.2015.Comparison of geophysical characteristics between the Zoujiashan and Niutoushan deposits in the Xiangshan uranium orefield,Jiangxi Province[J].Geology and Exploration,51(3):555-562(in Chinese with English abstract).
Duan Longchen,Pan Bingsuo,Fang Xiaohong.2012.The design and manufacture of diamond tools[M].WuHan:China University of Geosciences Press:206-209(in Chinese with English abstract).
Duan Zhiqiang,Li Shenghai.2016.Application of low solid phase washing fliud in GannanZaili area[J].Exploration Engineering(Geotechnical Drilling Engineering),43(6):26-29(in Chinese with English abstract).
Duan Hong hai,Hu Chun yue.2011.Selection analysis on drilling parameters of deep drilling in M24 mining area of Chengde[J].Exploration Engineering(Geotechnical Drilling Engineering),38(3):17-20(in Chinese with English abstract).
Dong Haiyan,San Wenjun,Song Shijie,Jiang Rui.,Li Yanning.2017.Drilling technology of scientific drilling CSDP-02 in the South Yellow Sea contin-ental shelf[J].Geology and Exploration,53(2):334-337(in Chinese with English abstract).
Dong Haiyan.2013.Application of wireline coring hydraulic hammer in the first deep drilling of rock gold exploration and the breakthrough[J].Exploration Engineering(Geotechnical Drilling Engineering),40(10):9-12(in Chinese with English abstract).
Dou Xiaoping,Shi Yanhua,Wu Zanhua,Xiongchao,Wan Shuangshaung,Sun Chongbo.2015.Rules of structural ore-controlling of the Xiangshan uranium orefield in Jiangxi Province[J].Geology and Exploration,51(5):879-887(in Chinese with English abstract).
Feng Meigui,Zhu Disi,Weng Wei,Huang Yuwen,Yang Peng,Jiang Rui.2016.Research on solid control system of flushing fluid circulation in geological core drilling and the matching technology[J].Exploration Engineering(Geotechnical Drilling Engineering),45(3):65-70,75.
Hu Shiyou,Songjun,Zhang Wei,Liu Tongliang.2009.Organization and management of drilling and loggingproject of scientific drilling(WFSD)project in Wenchuanearthquake fault zone[J].Exploration Engineering(Geotechnical Drilling Enginee-ring),36(12):1-4(in Chinese with English abstract).
Jiang Guichun.2015.Application of polyacrylamide solid-free drilling fluid in complex strata drilling[J].Exploration Engineering(Geotechnical Drilling Engineering),42(1):34-37(in Chinese with English abstract).
Kang Xin,Li Shenghai,Liu Xiaoyang,Wang Rongjin,Duan Longchen.2016.Establishment and application of calculation model for calculating pumppressure of rope coring in Heyuanbei aera[J].Exploration Engineering(Geotechnical Drilling Engineering),43(2):28-31(in Chinese with English abstract).
Kong Erwei,Gao Chao,Li Shenghai,Liu Xiaoyang,Guo Peiguo,Duan Longchen.2018.Torque analysis of the drilling string in the deep borehole CUSD2 at Heiyuanbei,Xiangshan area[J].Geology and Exploration,54(4):801-809(in Chinese with English abstract).
Li Shenghai,DuanZhiqiang,Han Yuanyuan,Liu Xiaoyang,Li Junwei,WangQi,Wang Qiang.2015.Drilling technology of CUSD2 hole in HeyuAnbei area[J].Exploration Engineering(Geotechnical Drilling Engineering),42(10):6-10(in Chinese with English abstract).
Li Shenghai,Ma Zhiyue,Deng Xianming,Duan Zhiqiang,Han Yuanyuan,Liu Xiaoyang,Kang Xin.2017.Study on the application of nonsolid phaserinse of polymer in CUSD3 hole in Niutou moutain[J].Exploration Engineering(Geotechnical Drilling Engineering),44(1):29-32(in Chinese with English abstract).
Li Junping,Wu Jinsheng,Hu li.2017.Research and application of diamond bit in Ruoergai uranium ore field[J].Exploration Engineering(Geotechnical Drilling Engineering),44(1):79-83(in Chinese with English abstract).
Li Haiming.2012.Analysis on the second opening of WFSD-2 hole and deviation correction construction[J].Exploration Engineering(Geotechnical Drilling Engineering),39(1):21-24(in Chinese with English abstract).
Liu Guangzhi.1998.Diamond drilling manual[M].Beijing:Geological Publishing House:235-236(in Chinese with English abstract).
Liu Xiaoyang,Li Dachang,Ye Xuefeng.2013.General situation of first deep drilling of China's uranium mine[J].Exploration Engineering(Geotechnical Drilling Engineering),40(S1):297-304.
Lu Yubei.2014.Experimental study on hydraulic hammer rope core in complex formation of Xiaoqinling[J].Geology and Exploration,50(2):392-394(in Chinese with English abstract).
Luo Guangqiang.2014.Design and application of the DPI-1 intelligent drilling parameter instrument for scientific drilling[J].Geology and Exploration,50(4):777-779(in Chinese with English abstract).
Shen Lina,Lu Yi,Ying Jianning.2017.Rsearch and application of NBSefficiently impregnated diamond in hard strata[J].Exploration Engineering(Geotechnical Drilling Engineering),44(1):84-86,92(in Chinese with English abstract).
Wang Luzhao,Li Xiaodong,Zhai Yufeng.2017.Research on drilling fluids technology for WFSD-4S Hole of Wenchuan earthquake fault scientific drilling project[J].Exploration Engineering(Geotechnical Drilling Engineering),44(2):27-31(in Chinese with English abstract).
Wang Da,He Yuanxin.2014.Geological drilling manual[M].ChangSha:Central South University Press:318(in Chinese with English abstract).
Wang Da,Zhang Wei,Zhang Xiaoxi.2007.Drilling engineering technology of CCSD-1 wall of the Chinese continental scientific drilling project[M].BeiJing:Science Press:256-259(in Chinese with English abstract).
Wang Jian,Nie Jiangtao,Guo Jian,Huang Zhizhang,Li Xiuzhen.2016.Characteristics of deep polymetallic mineralization in Xiangshan ore field,Jiang Xi Provence[J].Geology and Exploration,52(1):47-50(in Chinese with English abstract).
Wu Xiaoming,Hu Yule,He Bingxin.2002.Rinse and geotechnical fluids[M].Wu Han:China University Of Geosciences Press:39-41(in Chinese with English abstract).
Ye Xiaoping,Li Bo,Liu Xiayang,Gao Hui,Duan Longchen.2017.Research and application of differential double-acting hydraulic hammer dynamics equations[J].Geology and Exploration,54(4):801-809(in Chinese with English abstract).
Zeng Shiyou,Yang Kuancai,Cai Jihua,Kong Erwei.2015.Drilling technologiest at the 2000m-deep hole in the Xiaoqinlinggold field[J].Geology and Exploration,51(1):175-180(in Chinese with English abstract).
Zhu Hengyin,Cai Zhengshui.2014.Research and practice of NLSD-1hole construction technology in Ganzhou scientific drilling[J].Exploration Engineering(Geotechnical Drilling Engineering),41(6):1-7(in Chinese with English abstract).
Zhu Jianglong,Liu Yuejin.2013.Development and prospect of deep hole drilling equipment in China[J].Geological Equipment,(6):9-14(in Chinese with English abstract).
戴清峰,方根显,林万里.2015.江西相山火山岩型铀矿田邹家山与牛头岭矿区地球物理特征对比研究[J].地质与勘探,51(3):555-562.
段隆臣,潘秉锁,方小红.2012.金刚石工具的设计与制造[M].湖北武汉:中国地质大学出版社:206-209.
段志强,李生海.2016.低固相冲洗液在赣南再里地区的应用研究[J].探矿工程(岩土钻掘工程),43(6):26-29.
段鸿海,胡春跃.2011.承德M24矿区深孔钻探钻进参数的选择分析[J].探矿工程(岩土钻掘工程),38(3):17-20.
董海燕,单文军,宋世杰,蒋睿,李艳宁.2017.南黄海大陆架科学钻探CSDP-02井钻探施工技术[J]地质与勘探,53(2):334-337.
董海燕.2013.绳索取心液动锤在中国岩金勘查第一深钻的应用和最新进展[J].探矿工程(岩土钻掘工程),40(10):9-12.
窦小平,时燕华,吴赞华,熊超,万双双,孙宠波.2015.江西相山铀矿田构造控矿规律研究[J].地质与勘探,51(5):879-887.
冯美桂,朱迪斯,翁炜,黄玉文,杨鹏,蒋睿.2016.地质岩心钻探冲洗液固控系统及配套工艺研究[J].探矿工程(岩土钻掘工程),45(3):65-70,75.
胡时友,宋军,张伟,刘同良.2009.汶川地震断裂带科学钻探(WFSD)项目钻探和测井课题的组织实施与管理[J].探矿工程(岩土钻掘工程),36(12):1-4.
姜贵春.2015.聚丙烯酰胺无固相冲洗液在复杂地层中的应用研究[J].探矿工程(岩土钻掘工程),42(1):34-37.
康鑫,李生海,刘晓阳,王荣璟,段隆臣.2016.河元背地区绳索取心钻进泵压计算模型的建立与应用[J].探矿工程(岩土钻掘工程),43(2):28-31.
孔二伟,高超,李生海,刘晓阳,郭培国,段隆臣.2018.相山地区河元背深部钻探工程钻柱扭矩分析[J].地质与勘探,54(4)810-816.
李生海,段志强,韩园园,刘晓阳,李军委,王琦,王强.2015.相山地区河元背深钻CUSD2孔钻探技术[J].探矿工程(岩土钻掘工程),42(10):6-10,16.
李生海,马智跃,邓先明,段志强,韩园园,刘晓阳,康鑫.2017.高分子聚合物无固相冲洗液在牛头山深钻CUSD3孔的应用研究[J].探矿工程(岩土钻掘工程),44(1):29-32.
李俊萍,吴金生,胡立.2017.若尔盖铀矿田金刚石钻头的研究与应用[J].探矿工程(岩土钻掘工程),44(1):79-83.
李海明.2012.WFSD-2孔二开孔斜分析及纠斜施工[J].探矿工程(岩土钻掘工程),39(1)21-24.
刘广志.1998.金刚石钻探手册[M].北京:地质出版社:235-236.
刘晓阳,李大昌,叶雪峰.2013.中国铀矿第一科学深钻施工概况[J].探矿工程(岩土钻掘工程),40(S1):297-304.
卢予北.2014.小秦岭复杂地层液动锤绳索取心钻探试验研究[J].地质与勘探,50(2):392-394.
罗光强.2014.科学深钻DPI-1智能化多功能钻参仪的研制与应用研究[J].地质与勘探,50(4)777-779.
沈立娜,路杙,尹建宁.2017.坚硬地层NBS高效孕镶金刚石钻头的研究与应用[J].探矿工程(岩土钻掘工程),44(1):84-86,92.
王鲁朝,李晓东,翟玉峰.2017.汶川地震断裂带科学钻探项目WFSD-4S孔冲洗液技术[J].探矿工程(岩土钻掘工程),44(2):27-31.
王达,何远信.2014.地质钻探手册[M].长沙:中南大学出版社:318.
王达,张伟,张晓西.2007.中国大陆科学钻探工程科钻一井钻探工程技术[M].北京:科学出版社:256-259.
王健,聂江涛,郭建,黄志章,李秀珍.2016.江西相山矿田深部多金属矿化特征[J].地质与勘探,52(1):47-50.
乌效鸣,胡郁乐,贺冰新.2002.冲洗液与岩土工程浆液[M].武汉:中国地质大学出版社:39-41.
叶晓平,李博,刘晓阳,高辉,段隆臣.2017.差动式双作用液动冲击器冲锤动力学方程的研究和应用[J].地质与勘探,54(4):801-809.
曾石友,杨宽才,蔡记华,孔二伟.2015.小秦领金矿田2000m深孔钻探技术[J].地质与勘探,51(1):175-180.
朱恒银,蔡正水.2014.赣州科学钻探NLSD-1孔施工技术研究与实践[J].探矿工程(岩土钻掘工程),41(6):1-7.
朱江龙,刘跃进.2013.我国深孔钻探装备的发展与展望[J].地质装备(6):9-14.
Duan Longchen,Pan Bingsuo,Fang Xiaohong.2012.The design and manufacture of diamond tools[M].WuHan:China University of Geosciences Press:206-209(in Chinese with English abstract).
Duan Zhiqiang,Li Shenghai.2016.Application of low solid phase washing fliud in GannanZaili area[J].Exploration Engineering(Geotechnical Drilling Engineering),43(6):26-29(in Chinese with English abstract).
Duan Hong hai,Hu Chun yue.2011.Selection analysis on drilling parameters of deep drilling in M24 mining area of Chengde[J].Exploration Engineering(Geotechnical Drilling Engineering),38(3):17-20(in Chinese with English abstract).
Dong Haiyan,San Wenjun,Song Shijie,Jiang Rui.,Li Yanning.2017.Drilling technology of scientific drilling CSDP-02 in the South Yellow Sea contin-ental shelf[J].Geology and Exploration,53(2):334-337(in Chinese with English abstract).
Dong Haiyan.2013.Application of wireline coring hydraulic hammer in the first deep drilling of rock gold exploration and the breakthrough[J].Exploration Engineering(Geotechnical Drilling Engineering),40(10):9-12(in Chinese with English abstract).
Dou Xiaoping,Shi Yanhua,Wu Zanhua,Xiongchao,Wan Shuangshaung,Sun Chongbo.2015.Rules of structural ore-controlling of the Xiangshan uranium orefield in Jiangxi Province[J].Geology and Exploration,51(5):879-887(in Chinese with English abstract).
Feng Meigui,Zhu Disi,Weng Wei,Huang Yuwen,Yang Peng,Jiang Rui.2016.Research on solid control system of flushing fluid circulation in geological core drilling and the matching technology[J].Exploration Engineering(Geotechnical Drilling Engineering),45(3):65-70,75.
Hu Shiyou,Songjun,Zhang Wei,Liu Tongliang.2009.Organization and management of drilling and loggingproject of scientific drilling(WFSD)project in Wenchuanearthquake fault zone[J].Exploration Engineering(Geotechnical Drilling Enginee-ring),36(12):1-4(in Chinese with English abstract).
Jiang Guichun.2015.Application of polyacrylamide solid-free drilling fluid in complex strata drilling[J].Exploration Engineering(Geotechnical Drilling Engineering),42(1):34-37(in Chinese with English abstract).
Kang Xin,Li Shenghai,Liu Xiaoyang,Wang Rongjin,Duan Longchen.2016.Establishment and application of calculation model for calculating pumppressure of rope coring in Heyuanbei aera[J].Exploration Engineering(Geotechnical Drilling Engineering),43(2):28-31(in Chinese with English abstract).
Kong Erwei,Gao Chao,Li Shenghai,Liu Xiaoyang,Guo Peiguo,Duan Longchen.2018.Torque analysis of the drilling string in the deep borehole CUSD2 at Heiyuanbei,Xiangshan area[J].Geology and Exploration,54(4):801-809(in Chinese with English abstract).
Li Shenghai,DuanZhiqiang,Han Yuanyuan,Liu Xiaoyang,Li Junwei,WangQi,Wang Qiang.2015.Drilling technology of CUSD2 hole in HeyuAnbei area[J].Exploration Engineering(Geotechnical Drilling Engineering),42(10):6-10(in Chinese with English abstract).
Li Shenghai,Ma Zhiyue,Deng Xianming,Duan Zhiqiang,Han Yuanyuan,Liu Xiaoyang,Kang Xin.2017.Study on the application of nonsolid phaserinse of polymer in CUSD3 hole in Niutou moutain[J].Exploration Engineering(Geotechnical Drilling Engineering),44(1):29-32(in Chinese with English abstract).
Li Junping,Wu Jinsheng,Hu li.2017.Research and application of diamond bit in Ruoergai uranium ore field[J].Exploration Engineering(Geotechnical Drilling Engineering),44(1):79-83(in Chinese with English abstract).
Li Haiming.2012.Analysis on the second opening of WFSD-2 hole and deviation correction construction[J].Exploration Engineering(Geotechnical Drilling Engineering),39(1):21-24(in Chinese with English abstract).
Liu Guangzhi.1998.Diamond drilling manual[M].Beijing:Geological Publishing House:235-236(in Chinese with English abstract).
Liu Xiaoyang,Li Dachang,Ye Xuefeng.2013.General situation of first deep drilling of China's uranium mine[J].Exploration Engineering(Geotechnical Drilling Engineering),40(S1):297-304.
Lu Yubei.2014.Experimental study on hydraulic hammer rope core in complex formation of Xiaoqinling[J].Geology and Exploration,50(2):392-394(in Chinese with English abstract).
Luo Guangqiang.2014.Design and application of the DPI-1 intelligent drilling parameter instrument for scientific drilling[J].Geology and Exploration,50(4):777-779(in Chinese with English abstract).
Shen Lina,Lu Yi,Ying Jianning.2017.Rsearch and application of NBSefficiently impregnated diamond in hard strata[J].Exploration Engineering(Geotechnical Drilling Engineering),44(1):84-86,92(in Chinese with English abstract).
Wang Luzhao,Li Xiaodong,Zhai Yufeng.2017.Research on drilling fluids technology for WFSD-4S Hole of Wenchuan earthquake fault scientific drilling project[J].Exploration Engineering(Geotechnical Drilling Engineering),44(2):27-31(in Chinese with English abstract).
Wang Da,He Yuanxin.2014.Geological drilling manual[M].ChangSha:Central South University Press:318(in Chinese with English abstract).
Wang Da,Zhang Wei,Zhang Xiaoxi.2007.Drilling engineering technology of CCSD-1 wall of the Chinese continental scientific drilling project[M].BeiJing:Science Press:256-259(in Chinese with English abstract).
Wang Jian,Nie Jiangtao,Guo Jian,Huang Zhizhang,Li Xiuzhen.2016.Characteristics of deep polymetallic mineralization in Xiangshan ore field,Jiang Xi Provence[J].Geology and Exploration,52(1):47-50(in Chinese with English abstract).
Wu Xiaoming,Hu Yule,He Bingxin.2002.Rinse and geotechnical fluids[M].Wu Han:China University Of Geosciences Press:39-41(in Chinese with English abstract).
Ye Xiaoping,Li Bo,Liu Xiayang,Gao Hui,Duan Longchen.2017.Research and application of differential double-acting hydraulic hammer dynamics equations[J].Geology and Exploration,54(4):801-809(in Chinese with English abstract).
Zeng Shiyou,Yang Kuancai,Cai Jihua,Kong Erwei.2015.Drilling technologiest at the 2000m-deep hole in the Xiaoqinlinggold field[J].Geology and Exploration,51(1):175-180(in Chinese with English abstract).
Zhu Hengyin,Cai Zhengshui.2014.Research and practice of NLSD-1hole construction technology in Ganzhou scientific drilling[J].Exploration Engineering(Geotechnical Drilling Engineering),41(6):1-7(in Chinese with English abstract).
Zhu Jianglong,Liu Yuejin.2013.Development and prospect of deep hole drilling equipment in China[J].Geological Equipment,(6):9-14(in Chinese with English abstract).
戴清峰,方根显,林万里.2015.江西相山火山岩型铀矿田邹家山与牛头岭矿区地球物理特征对比研究[J].地质与勘探,51(3):555-562.
段隆臣,潘秉锁,方小红.2012.金刚石工具的设计与制造[M].湖北武汉:中国地质大学出版社:206-209.
段志强,李生海.2016.低固相冲洗液在赣南再里地区的应用研究[J].探矿工程(岩土钻掘工程),43(6):26-29.
段鸿海,胡春跃.2011.承德M24矿区深孔钻探钻进参数的选择分析[J].探矿工程(岩土钻掘工程),38(3):17-20.
董海燕,单文军,宋世杰,蒋睿,李艳宁.2017.南黄海大陆架科学钻探CSDP-02井钻探施工技术[J]地质与勘探,53(2):334-337.
董海燕.2013.绳索取心液动锤在中国岩金勘查第一深钻的应用和最新进展[J].探矿工程(岩土钻掘工程),40(10):9-12.
窦小平,时燕华,吴赞华,熊超,万双双,孙宠波.2015.江西相山铀矿田构造控矿规律研究[J].地质与勘探,51(5):879-887.
冯美桂,朱迪斯,翁炜,黄玉文,杨鹏,蒋睿.2016.地质岩心钻探冲洗液固控系统及配套工艺研究[J].探矿工程(岩土钻掘工程),45(3):65-70,75.
胡时友,宋军,张伟,刘同良.2009.汶川地震断裂带科学钻探(WFSD)项目钻探和测井课题的组织实施与管理[J].探矿工程(岩土钻掘工程),36(12):1-4.
姜贵春.2015.聚丙烯酰胺无固相冲洗液在复杂地层中的应用研究[J].探矿工程(岩土钻掘工程),42(1):34-37.
康鑫,李生海,刘晓阳,王荣璟,段隆臣.2016.河元背地区绳索取心钻进泵压计算模型的建立与应用[J].探矿工程(岩土钻掘工程),43(2):28-31.
孔二伟,高超,李生海,刘晓阳,郭培国,段隆臣.2018.相山地区河元背深部钻探工程钻柱扭矩分析[J].地质与勘探,54(4)810-816.
李生海,段志强,韩园园,刘晓阳,李军委,王琦,王强.2015.相山地区河元背深钻CUSD2孔钻探技术[J].探矿工程(岩土钻掘工程),42(10):6-10,16.
李生海,马智跃,邓先明,段志强,韩园园,刘晓阳,康鑫.2017.高分子聚合物无固相冲洗液在牛头山深钻CUSD3孔的应用研究[J].探矿工程(岩土钻掘工程),44(1):29-32.
李俊萍,吴金生,胡立.2017.若尔盖铀矿田金刚石钻头的研究与应用[J].探矿工程(岩土钻掘工程),44(1):79-83.
李海明.2012.WFSD-2孔二开孔斜分析及纠斜施工[J].探矿工程(岩土钻掘工程),39(1)21-24.
刘广志.1998.金刚石钻探手册[M].北京:地质出版社:235-236.
刘晓阳,李大昌,叶雪峰.2013.中国铀矿第一科学深钻施工概况[J].探矿工程(岩土钻掘工程),40(S1):297-304.
卢予北.2014.小秦岭复杂地层液动锤绳索取心钻探试验研究[J].地质与勘探,50(2):392-394.
罗光强.2014.科学深钻DPI-1智能化多功能钻参仪的研制与应用研究[J].地质与勘探,50(4)777-779.
沈立娜,路杙,尹建宁.2017.坚硬地层NBS高效孕镶金刚石钻头的研究与应用[J].探矿工程(岩土钻掘工程),44(1):84-86,92.
王鲁朝,李晓东,翟玉峰.2017.汶川地震断裂带科学钻探项目WFSD-4S孔冲洗液技术[J].探矿工程(岩土钻掘工程),44(2):27-31.
王达,何远信.2014.地质钻探手册[M].长沙:中南大学出版社:318.
王达,张伟,张晓西.2007.中国大陆科学钻探工程科钻一井钻探工程技术[M].北京:科学出版社:256-259.
王健,聂江涛,郭建,黄志章,李秀珍.2016.江西相山矿田深部多金属矿化特征[J].地质与勘探,52(1):47-50.
乌效鸣,胡郁乐,贺冰新.2002.冲洗液与岩土工程浆液[M].武汉:中国地质大学出版社:39-41.
叶晓平,李博,刘晓阳,高辉,段隆臣.2017.差动式双作用液动冲击器冲锤动力学方程的研究和应用[J].地质与勘探,54(4):801-809.
曾石友,杨宽才,蔡记华,孔二伟.2015.小秦领金矿田2000m深孔钻探技术[J].地质与勘探,51(1):175-180.
朱恒银,蔡正水.2014.赣州科学钻探NLSD-1孔施工技术研究与实践[J].探矿工程(岩土钻掘工程),41(6):1-7.
朱江龙,刘跃进.2013.我国深孔钻探装备的发展与展望[J].地质装备(6):9-14.
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址：北京市海淀区学院路29号 邮编：100083 电话：办公室：(+86 10)66554848；文献借阅、咨询服务、科技查新：66554700 |