U.S. Refinery Efficiency: Impacts Analysis and Implications for Fuel Carbon Policy Implementation

详细信息    查看全文

• 作者：Grant S. Forman ; Vincent B. Divita ; Jeongwoo Han ; Hao Cai ; Amgad Elgowainy ; Michael Wang
• 刊名：Environmental Science & Technology
• 出版年：2014
• 出版时间：July 1, 2014
• 年：2014
• 卷：48
• 期：13
• 页码：7625-7633
• 全文大小：379K
• ISSN：1520-5851

文摘

In the next two decades, the U.S. refining industry will face significant changes resulting from a rapidly evolving domestic petroleum energy landscape. The rapid influx of domestically sourced tight light oil and relative demand shifts for gasoline and diesel will impose challenges on the ability of the U.S. refining industry to satisfy both demand and quality requirements. This study uses results from Linear Programming (LP) modeling data to examine the potential impacts of these changes on refinery, process unit, and product-specific efficiencies, focusing on current baseline efficiency values across 43 existing large U.S. refineries that are operating today. These results suggest that refinery and product-specific efficiency values are sensitive to crude quality, seasonal and regional factors, and refinery configuration and complexity, which are determined by final fuel specification requirements. Additional processing of domestically sourced tight light oil could marginally increase refinery efficiency, but these benefits could be offset by crude rebalancing. The dynamic relationship between efficiency and key parameters such as crude API gravity, sulfur content, heavy products, residual upgrading, and complexity are key to understanding possible future changes in refinery efficiency. Relative to gasoline, the efficiency of diesel production is highly variable, and is influenced by the number and severity of units required to produce diesel. To respond to future demand requirements, refiners will need to reduce the gasoline/diesel (G/D) production ratio, which will likely result in greater volumes of diesel being produced through less efficient pathways resulting in reduced efficiency, particularly on the marginal barrel of diesel. This decline in diesel efficiency could be offset by blending of Gas to Liquids (GTL) diesel, which could allow refiners to uplift intermediate fuel streams into more efficient diesel production pathways, thereby allowing for the efficient production of incremental barrels of diesel without added capital investment for the refiner. Given the current wide range of refinery carbon intensity values of baseline transportation fuels in LCA models, this study has shown that the determination of refinery, unit, and product efficiency values requires careful consideration in the context of specific transportation fuel GHG policy objectives.