Conversion behaviour and resulting mechanical properties of polysilazane-based coatings

详细信息	查看全文 | 推荐本文 |

• 作者：Martin Gü ; nthner^a ; ^{martin.guenthner@uni-bayreuth.de} ; Kaishi Wang^b ; ^{kshwang@u.washington.edu} ; Rajendra K. Bordia^b ; ^{bordia@u.washington.edu} ; Gü ; nter Motz^a ; ^{guenter.motz@uni-bayreuth.de}
• 关键词：Polymer derived ceramics ; A. Films ; B. Surfaces ; C. Mechanical properties ; E. Structural applications
• 刊名：Journal of the European Ceramic Society
• 出版年：2012
• 期刊代码：53_09552219
• 类别：ms
• 出版时间：July, 2012
• 卷：32
• 期：9
• 页码：1883-1892
• 文件大小：1263 K

摘要

Polymer-derived ceramics exhibit a convenient route for the processing of low-dimensional ceramics like coatings or fibres. In previous investigations unfilled and composite coatings have been developed using ammonolysed bis(dichloromethylsilyl)ethane (ABSE) or perhydropolysilazane (PHPS) as precursors and BN, ZrO₂ or glass particles as filler materials. The coating systems provide excellent corrosion and oxidation resistance to underlying metals. This paper reports on the effect of the precursor system and the pyrolysis parameters on the conversion behaviour, shrinkage and mechanical properties, including hardness and Young's modulus, of ABSE- and PHPS-based coatings. Therefore the crosslinking and pyrolysis behaviour as well as the mechanical properties of the coatings were investigated up to pyrolysis temperatures of 1000 掳C in nitrogen and in air by ATR-IR, SEM, profilometry and nanoindentation measurements. The coatings pyrolysed at 1000 掳C in nitrogen, have hardness values of 13 GPa and Young's moduli up to 155 GPa.