The inventory of sources, environmental releases and risk assessment for perfluorooctane sulfonate in China

详细信息	查看全文 | 推荐本文 |

• 作者：Lai Zhang^a ; Jianguo Liu^a ; ^{jgliu@pku.edu.cn} ; Jianxin Hu^a ; Chao Liu^a ; Weiguang Guo^a ; Qiang Wang^a ; Hong Wang^b
• 关键词：Perfluorooctane sulfonate ; Sources inventory ; Environmental releases ; Environmental risk assessment
• 刊名：Environmental Pollution
• 出版年：2012
• 期刊代码：28_02697491
• 类别：env
• 出版时间：June, 2012
• 卷：165
• 期：Complete
• 页码：193-198
• 文件大小：445 K

摘要

With about 100 t/y of the production volume, perfluorootane sulfonates (PFOS) are mainly used for metal plating, aqueous fire-fighting foams (AFFFs) and sulfluramidin China, and the use amount is about 30-40 t/y, 25-35 t/y and 4-8 t/y respectively. Based on the inventory of PFOS production and uses with geographic distribution educed from statistics, environmental risk assessment of PFOS was taken by using EUSES model, as well as its environmental releases were estimated both in local and regional levels in China. While the environmental release from manufacture is significant in Central China region, metal plating was identified as the major PFOS release source in regional level. The East China region shows the most strong emission strength of PFOS. Though the predicted environmental concentrations (PECs) were not exceed current relevant predicted no effect concentrations (PNECs) of the risk characterization for PFOS, higher PECs was estimated around major PFOS release sources showing undesirable environmental risk at local level.