Laboratory scale experimental analysis of Steam-Over-Solvent injection in Fractured Reservoirs (SOS-FR) for heavy-oil recovery

详细信息	查看全文 | 推荐本文 |

• 作者：Al-Muatasim Al-Bahlani ; Tayfun Babadagli ; ^{tayfun@ualberta.ca}
• 关键词：heavy-oil recovery ; alternate injection of steam and solvent ; fractured oil-wet reservoirs ; deep reservoirs ; solvent retrieval ; process efficiency
• 刊名：Journal of Petroleum Science and Engineering
• 出版年：2012
• 期刊代码：33_09204105
• 类别：pw
• 出版时间：April, 2012
• 卷：84-85
• 期：Complete
• 页码：42-56
• 文件大小：2799 K

摘要

Heavy oil trapped in fractured carbonate reservoirs possesses a great challenge to the petroleum industry due to high oil viscosity, low matrix permeability, and unfavorable wettability of the matrix. Thermal recovery methods (mainly steam injection) show a promising way forward to unlock these reserves. Yet, previous experiences revealed that heating the matrix to drain heavy-oil by gravity is a slow and inefficient process due to low matrix recovery caused by unfavorable matrix properties (oil wetness and low permeability). Acceleration of matrix-fracture interaction by changing the matrix and oil properties could be possible by injecting the proper hydrocarbon solvent alternately with steam as reported in our earlier work. This process, called Steam-Over-Solvent injection in Fractured Reservoirs (SOS-FR), consists of several cycles, each having three phases: (1) steam/hot water injection; (2) solvent injection; and (3) steam/hot water injection.

This paper reports a detailed experimental analysis of this new method. Static and dynamic tests were conducted by exposing heavy-oil saturated fractured rocks to hot water and solvent alternately. Oil-wet sandstone and carbonate samples were saturated with heavy-crude oil and tested against different solvents, namely heptane, kerosene, decane and light crude. Fractured cores were tested under dynamic conditions with different solvent injection rates to explore the rate dependency of the process. The physics of the injection rate and the role of asphaltene as a bi-product were examined and discussed. Understanding the physics of this new technique will contribute to the development of an alternative method at field conditions for unlocking trapped heavy matrix oil from oil-wet, fractured, and deep carbonate fields.