摘要
针对港口等场所散料转载过程中频繁出现阻塞、粉尘等不利于生产的状况,应用离散单元法对散体物料的转载过程进行仿真分析,在三维软件中建立转载站的几何体模型并导入到EDEM软件中进行仿真,比较不同参数下结构的受力与物料分布情况。仿真得出了最优的集料板角度与最优的溜槽曲率半径。
To the problem of block and dust of bulk material in transfer station in ports and other places,this paper studies the transfer chute for bulk material.The transfer process of bulk material is simulated and analyzed by use of discrete element method.The geometry model of the transfer station is inputted into the EDEM software,and the finite analysis is conducted.The stress and material distribution of model under different parameters are compared.We can get the optimal radius of curvature of chute and the optimal set point.
引文
[1]宋伟刚,王天夫.散状物料转载系统设计DEM仿真方法的研究[J].工程设计学报,2011,18(6):428-436.
[2]姚艳萍,孟文俊,廖志诚.平底仓系统水平螺旋输送机效率EDEM仿真研究[J].现代制造工程,2015(2):6-11.
[3]Mcbride W,Sinnott M,Cleary P W.Discrete element modelling of a bucket elevator head pulley transition zone[J].Granular Matter,2011,13(2):169-174.
[4]Grima A P,Wypych P W.Investigation into calibration of discrete element model parameters for scale-up and validation of particle-structure interactions under impact conditions[J].Powder Technology,2011,212(1):198-209.
[5]Ai J,Chen J F,Rotter J M,et al.Assessment of rolling resistance models in discrete element simulations[J].Powder Technology,2011,206(3):269-282.
[6]蒋权,李小博,孟文俊.基于EDEM的转运站落料管转运物料的离散元分析[J].矿山机械,2014,42(4):51-55.
[7]海基科技.基于离散元技术的EDEM软件详解[J].CAD/CAM与制造业信息化,2012(5):36-40.
[8]Zhu H P,Zhou Z Y,Yang R Y,et al.Discrete particle simulation of particulate systems:A review of major applications and findings[J].Chemical Engineering Science,2008,63(23):5728-5770.