动车转向架六角头螺栓断裂失效分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Fracture failure analysis of a hexagon head bolt on the bogie for motor cars 作者：徐健康 ; 杨震炯 ; 方建飞 ; 胡帅 ; 王会 英文作者：XU Jian-kang;YANG Zhen-jiong;FANG Jian-fei;HU Shuai;WANG Hui;Yongkang Quanlity and Technology Supervision and Inspection Center;Hangzhou Tonfus Environmental Protection Technology Co.,Ltd.; 关键词：六角头螺栓 ; 断裂 ; 过烧 ; 过载 英文关键词：hexagon head bolt;;fracture;;overburn;;overload 中文刊名：WLCS 英文刊名：Physics Examination and Testing 机构：永康市质量技术监督检测中心;杭州同孚环保科技有限公司; 出版日期：2019-02-15 出版单位：物理测试 年：2019 期：v.37;No.217 语种：中文; 页：WLCS201901018 页数：5 CN：01 ISSN：11-2119/O4 分类号：55-59

摘要

通过宏观形貌分析、扫描电镜及能谱分析、金相组织检测、力学性能检测、化学成分检测对六角头螺栓断裂原因进行分析。结果表明,失效螺栓的化学成分、表心硬度、显微组织、晶粒度等指标均无异常。断口宏观形貌显示,约1/2断面区域呈黑色。经能谱扫描表明,黑色区域氧化严重,该区域可能经历过高温氧化。断口微观可见明显的沿晶断裂形貌,晶粒粗大。结合螺栓制造工艺,推断红打工序加热炉存在"跑温"情况导致样品发生过烧。因此,判断螺栓失效模式为过烧引起的过载断裂。
        The failure reason of the hexagon head bolt was studied by macroscopic morphology analysis,scanning electron microscope and energy dispersive spectrometer analysis,metallographic microstructure detection,mechanical properties detection and chemical composition analysis. The results showed that the chemical composition,surface and core hardness,microstructures,grain size of the bolt were all qualified. The macroscopic appearance showed that about half of the area was black. The data of energy dispersive spectrometer showed that the black region was oxidized severely,and the region may have experienced high temperature oxidation. There was intercrystalline fracture morphology on the section,and the grain was coarse. Combined with the bolt manufacturing process,it was concluded that there was a running temperature in the red heating furnace,which resulted in overburn. Therefore,the failure mode of the bolt was the overload fracture caused by overburn.

引文

[1]张栋,钟培道,陶春虎,等.失效分析[M].北京:国防工业出版社,2013.
    [2]蔡晓文. S48C锻件开裂原因分析与研究[J].热加工工艺,2013,42(23):203.
    [3]龚丹梅,袁鹏斌,余世杰,等. S135钢级钻杆管体断裂原因分析[J].金属热处理,2013,38(7):173.
    [4]冯银平,王云飞,魏彩丽,等.板螺栓断裂失效分析[J].拖拉机与农用运输机,2017,44(5):57.
    [5]刘晓光,徐浩,高鑫.汽车主轴的断裂失效分析[J].铸造技术,2018,39(4):933.
    [6]陈立宗,徐娜,丁宁,等.驱动轴断裂失效分析[J].热加工工艺,2017,46(21):255.
    [7]刘善德.某传动轴的中花键轴的矫直断裂分析[J].轻型汽车技术,2016(3):38.
    [8]金林奎,赵建国,王春亮.法兰套管件调质处理开裂原因分析[J].理化检验:物理分册,2015,51(7):504.