摘要
为了使燃煤锅炉烟气中NOx的含量满足国家标准,在烟气排放前增加了脱硝工艺过程。以选择性非催化还原法(SNCR)作为脱硝工艺,西门子S7-1500 PLC作为控制核心,采用TIA portal的WinCC设计烟气脱硝监测系统,着重探讨了系统主画面、尿素溶液制备画面与设备运行状态画面的组态。系统成功用于生成实践,取得了良好的效果。
In order to make the NOx content in the flue gas of coal-fired boilers meet the national standards, the denitration process is added before the flue gas is discharged. Taking selective non-catalytic reduction(SNCR) as denitration process, Siemens S7-1500 PLC as control core, TIA portal WinCC is used to design flue gas denitration monitoring system, focusing on the configuration of the system main screen, urea solution preparation screen and equipment operation status screen. The system was successfully used to generate practices and achieved good results.
引文
[1]王天泽,楚英豪,郭家秀,尹华强.烟气脱硝技术应用现状与研究进展[J].四川环境,2012(3).
[2]姜海燕.西门子PLC、组态王在湿法烟气脱硫系统中的应用[J].矿山机械,2010(5).
[3]dongchang.国家及地方锅炉大气污染物排放标准汇总[EB/OL].http://www.360doc.com/content/18/0711/11/253213_769526013.shtml,2018-07-11/2019-02-15.
[4]廖常初.西门子人机界面(触摸屏)组态与应用技术[M].北京:机械工业出版社,2018.
[5]王苏.基于PLC的烟气脱硫脱硝控制系统研究[D].哈尔滨理工大学,2016.
[6]顾卫荣,周明吉,马薇.燃煤烟气脱硝技术的研究进展[J].化工进展,2012(9).
[7]单学军.基于PLC的燃煤锅炉脱硝控制系统[J].化工自动化及仪表,2014(7).
[8]王玉敏,赵光.控制系统在SNCR脱硝系统中的应用[J].科技创新与应用,2014(34).
[9]王天泽,楚英豪,郭家秀,尹华强.烟气脱硝技术应用现状与研究进展[J].四川环境,2012(3).