圆光栅测角系统误差分析与修正

详细信息    查看全文 | 推荐本文 |

英文篇名：Error analysis and correction of circular grating angle measurement system 作者：张文颖 ; 朱浩然 英文作者：ZHANG Wenying;ZHU Haoran;Institute for Interdisciplinary Quantum Information Technology, Jilin Engineering Normal University;Jilin Engineering Laboratory for Quantum Information Technology;School of Electronics and Information Engineering, Changchun University of Science and Technology; 关键词：圆光栅 ; 测角系统 ; 偏心误差 ; 误差分析 英文关键词：circular grating;;angle measuring system;;eccentricity error;;error analysis 中文刊名：YYGX 英文刊名：Journal of Applied Optics 机构：吉林工程技术师范学院量子信息技术交叉学科研究院;吉林省量子信息技术工程实验室;长春理工大学电子信息工程学院; 出版日期：2019-05-15 出版单位：应用光学 年：2019 期：v.40;No.233 基金：2018年度博士科研启动经费项目(BSKJ201827) 语种：中文; 页：YYGX201903009 页数：5 CN：03 ISSN：61-1171/O4 分类号：47-51

摘要

为了提高测角系统的测量精度,基于误差的特性和表现形式,从谐波角度对测角系统中的刻划误差、光电信号误差、偏心误差、倾斜误差和变形导致的误差建立相应的数学模型,并对偏心误差和倾斜误差进行仿真分析。搭建了金属圆光栅测角系统,对系统中的误差进行了分析和修正。实验结果表明:测角系统测角误差为134.2″,修正后误差为32.23″,圆光栅测角系统误差分析为后续的误差补偿提供了理论基础。
        In order to improve the measurement accuracy of the angle measuring system, based on the characteristics and form of the error, the corresponding mathematical models of the scoring error, photoelectric signal error, eccentricity error, tilt error and the error caused by the deformation in the angle measuring system were established from the harmonic angle aspect,and the eccentricity error and tilt error were analyzed. Furthermore,a metal circular grating angle measuring system was built, and the error in the system was analyzed and corrected. The experimental results show that the angle measurement error of the angle measuring system is 134.2″, and the corrected error is 32.23″. The error analysis of the circular grating angle measurement system provides a theoretical basis for the subsequent error compensation.

引文

[1] WOFFINDEN D C,GELLER D K.Optimal orbital rendezvous maneuvering for angles-only navigation[J].Journal of Guidance Control & Dynamics,2012,32(4):1382-1387.
    [2] D’AMICO S,ARDAENS J S,GAIAS G,et al.Noncooperative rendezvous using angles-only optical navigation:system design and flight results[J].Journal of Guidance Control & Dynamics,2013,36(36):1576-1595.
    [3] LI Haixia,ZHANG Rong,HAN Fengtian.Errortesting and compensation of an inductosyn-based angular measurement system[J].Journal of Tsinghua Univisity(Sci.& Technol.),2016,56(6):611-616.李海霞,张嵘,韩丰田.感应同步器测角系统误差测试及补偿[J].清华大学学报(自然科学版),2016,56:(6):611-616.
    [4] GELLER D K,PEREZ A.Initial relative orbit determination for close-in proximity operations[J].Journal of Guidance Control Dynamics,2015,38(9):1-9.
    [5] GAO Guanbin,WANG Wen,LING Jian,etal.Error compensation and parameter identification of circular grating angle sensors[J].Optics and Precision Engineering,2010,18(8):1766-1762.高贯斌,王文,林铿,等.圆光栅角度传感器的误差补偿及参数辨识[J].光学精密工程,2010,18(8):1766-1762.
    [6] YANG Guijie,CUI Naizheng,SUN Li,et al.Error analysis for integrated tracking angle measuring system[J].Journal of Harbin Institute of Technology,2003,35(6):703-706.杨贵杰,崔乃政,孙力,等.一体化跟踪型测角系统的误差分析[J].哈尔滨:哈尔滨工业大学学报,2003,35(6):703-706.
    [7] NIREI M,YANANOTO Y,KITAZAWA K,et al.Angular error analysis of an 8X- VR revolver with an eccentric rotor[J].Journal of Magnetism and Magnetic Materials,2002,24(2/3/4/5):1202-1205.
    [8] ZHU Fan,WU Yiming,LIU Changchun.Eliminating influence of grating encoder's eccentricity and vibration to Moiré fringes signal by four reading head[J].Acta Optica Sinica,2011,31(4):0412008.朱帆,吴易明,刘长春.四读头法消除码盘偏心和振动对叠栅条纹相位测量的影响[J].光学学报,2011,31(4):0412008
    [9] WANG Xianjun.Error and precision analysis of photoelectric angle encoder subdivision signal[J].Optics and Precision Engineering,2012,20(2):379-386.王显军.光电轴角编码器细分信号误差及精度分析[J].光学精密工程,2012,20(2):379-386.
    [10] GAO Zhonghua.Study on self-calibration and error correction method and key technology of time-grating angular displacement sensor[C].Hefei:Hefei University of Technology,2014:20-50.高忠华.光栅角位移传感器自标定与误差修正方法及关键技术研究[D].合肥:合肥工业大学,2014:20-50.
    [11] WANG Wen,LIN Keng,GAO Guanbin,et al.Eccentricity parameter identification of angle sensors for articulated arm CMMs[J].Optics and Precision Engineering,2010,18(1):135-141.王文,林铿,高贯斌,等.关节臂式坐标测量机角度传感器偏心参数辨识[J].光学·精密工程,2010,18(1):135-141.
    [12] RISTIC B,ARULAMPALAM S,MUSSO C.The influence of communication bandwidth on target tracking with angle only measurements from two platforms[J].Signal Processing,2001,81(9):1801-1811.
    [13] GECK R D,FRICKE A,ELSTER C.Calicration of angle encoders using transfer functions [J].Meas.Sci.Technology,2006,17:2811-2818.
    [14] ZHAO Ting,CHEN Zhitong,ZHANG Yun,et al .Measurement method of high reflective surface and small fillet structure based on blue light scanner[J].Journal of Applied Optics,2019,V40(1):86-92.赵婷,陈志同,张云,等.基于蓝光扫描仪的高光面小圆角结构测量方法[J].应用光学,2019,40(1):86-92.
    [15] ZHANG Jianlong,PAN Xin,HE Lei,et al .Error analysis of optical system for full-view and high-precision three-dimensional measuring instrument[J].Journal of Applied Optics,2018,39(3):392-399.张建隆,潘鑫,贺磊,等.全视角高精度三维测量仪光学系统误差分析研究[J].应用光学,2018,39(3):392-399.