摘要
本设计详细阐述了基于ZigBee技术和CC2530模块的无线温度监控系统设计方法,主要介绍了硬件部分和软件部分的设计思路,包括信号传输模块和控制模块,核心电路均为ZigBee模块.本设计具有成本低、速率快、稳定性强等优点,较好地解决了传统温度监控存在的问题.
The design method of the wireless temperature monitoring system based on ZigBee technology and CC2530 module is described in detail. The design ideas of the hardware and software parts are introduced, including the signal transmission module and the control module. The core circuit is the ZigBee module. The design has the advantages of low cost, fast rate and stability, which solves the problems existing in traditional temperature monitoring.
引文
[1] 袁思捷,邹云峰.基于ZigBee的无线温湿度监控系统设计[J].科技资讯,2018(4):22-24.
[2] 周海鸿,周嘉奉.基于ZigBee技术的温湿度监测系统[J].应用天地,2015,34(7):75-79.
[3] 王春香,纪松波.采用ZigBee技术的温室环境监控系统设计[J].电子测量技术,2014,37(12):120-122.
[4] 程智明,匡程.基于物联网的智能环境监控系统设计[J].科技广场,2017(8):103-106.
[5] 徐振福.ZigBee技术在智能家居系统中的应用研究[D].中国科学院大学硕士学位论文(工程管理与信息技术学院),2014.
[6] 李敏.基于安卓与ZigBee技术的室内智能家居系统设计[D].广东工业大学硕士学位论文,2016.
[7] 王勇,王梨英.基于单片机的环境检测系统的设计[J].电脑知识与技术,2018(7):238-239.
[8] 杜军朝,刘惠,刘传益,等.ZigBee技术原理与实战[M].北京:机械工业出版社,2017.