ZrB_2陶瓷增韧技术

详细信息    查看官网全文

• 英文论文题名：Toughening Technology for ZrB_2 Ceramics
• 论文作者：柳敏静 ; 赵全月
• 英文论文作者：Liu Minjing ; Zhao Quanyue ; State Key Laboratory of Structural Analysis for Industrial Equipment ; Dalian University of Technology
• 年：2016
• 作者机构：大连理工大学工业装备结构分析国家重点实验室;
• 论文关键词：ZrB2陶瓷 ; 增韧 ; 颗粒 ; 晶须 ; 纤维 ; 仿生叠层
• 英文论文关键词：ZrB_2 ceramic ; toughen ; particle ; whisker ; fiber ; bionic laminated
• 会议召开时间：2016-10-31
• 会议录名称：探索 创新 交流（第7集）——第七届中国航空学会青年科技论坛文集（下册）
• 英文会议录名称：Discovery,Innovation and Communication——Proceedings of 7th CSAA Science and Technology Youth Forum
• 语种：中文
• 分类号：V254.2
• 学会代码：ZGHU
• 会议名称：探索 创新 交流（第7集）——第七届中国航空学会青年科技论坛
• 会议地点：中国广东中山
• 主办单位：中国航空学会
• 学会名称：中国航空学会
• 页数：4
• 文件大小：1040k
• 原文格式：O
• 会议级别：全国

摘要

随着我国航空航天事业的飞速发展,超高温陶瓷(Ultra—high temperature ceramics,UHTCs)作为一种可以应用干超高温结构中的理想材料受到国内外研究人员的广泛关注。本文介绍了颗粒增韧、晶须增韧、纤维增韧、仿生叠层增韧等ZrB_2陶瓷增韧技术的增韧机理以及研究现状,展望了今后ZrB_2陶瓷增韧技术的发展方向。
With the rapid development of China's aerospace industry,ultra-high temperature ceramics,as candidate materials used for ultra-high temperature structures,have drawn great interests.In this paper,particle toughening,whisker toughing,fiber toughing and bionic laminated toughing are introduced.Toughening mechanism has been discussed.Finally the trend of research is prospected.

引文

[1]Upadhya K,Yang J M,Hoffman W P.Materials for ultrahigh temperature structural applications[J].American Ceramic Society Bulletin,1997,76(12):51-56.
    [2]Fahrenholtz W G,Hilmas G E,Chamberlain A L,et al.Processing and Characterization of ZrB2-Based Ultra-High Temperature Monolithic and Fibrous Monolithic Ceramics[J].Journal of materials science,2004,39(19):5951-5957.
    [3]Neuman E W,Hilmas G E,Fahrenholtz W G.Ultra-high Temperature Mechanical Properties of a Zirconium DiborideZirconium Carbide Ceramic[J].Journal of the American Ceramic Society,2016,99(2):597-603.
    [4]Levine S R,Opila E J,Halbig M C,et al.Evaluation of Ultra-High Temperature Ceramics for Aeropropulsion use[J].Journal of the European Ceramic Society,2002,22(14):2757-2767.
    [5]Van Wie D M,Drewry Jr D G,King D E,et al.The Hypersonic Environment:Required Operating Conditions and Design Challenges[J].Journal of Materials Science,2004,39(19):5915-5924.
    [6]Stadelmann R,Lugovy M,Orlovskaya N,et al.Mechanical Properties and Residua]Stresses in ZrB_2-SiC Spark Plasma Sintered Ceramic Composites[J].Journal of the European Ceramic Society,2016,36(7):1527-1537.
    [7]Stadelmann R,Lugovy M,Orlovskaya N,et al.Mechanical Properties and Residual Stresses in ZrB_2-SiC Spark Plasma Sintered Ceramic Composites[J].Journal of the European Ceramic Society,2016,36(7):1527-1537.
    [8]Nasiri Z,Maslihadi M,Abdollahi A.Effect of Short Carbon Fiber Addition on Pressureless Densification and Mechanical Properties of ZrB_2-SiC-C_(sf)Nanocomposite[J].International Journal of Refractory Melals and Hard Materials,2015,51:216-223.
    [9]Zhao L,Jia D,Wang Y,et al.ZrC-ZrB_2 Matrix Composites with Enhanced Toughness Prepared by Reactive Hot Pressing[J].Scripta Materialia,2010,63(8):887-890.
    [10]Liu H T,Zou J,Ni D W,et al.Textured and PlateletReinforced ZrB_2-Based Ultra-High-Temperature Ceramics[J].Scripta Materialia,2011,65(1):37-40.
    [11]Sciti D,Guicciardi S,Silvestroni L.SiC Chopped Fibers Reinforced ZrB_2:Effect of the Sintering aid[J].Scripta Materialia,2011,64(8):769-772.
    [12]郝春成,崔作林,尹衍升,等.颗粒增韧陶瓷的研究进展[J].材料导报,2002,16(2):28-30.
    [13]张国军,金宗哲.颗粒增韧陶瓷的增韧机理[J].硅酸盐学报,1994,22(3):259-269.
    [14]Fahrenholtz W G,Hilmas G E,Chamberlain A L,et al.Processing and Characterization of ZrB_2-Based Ultra-High Temperature Monolithic and Fibrous Monolithic Ceramics[J].Journal of materials science,2004,39(19):5951-5957.
    [15]Sun X,Han W,Hu P,et al.Microstructure and Mechanical Properties of ZrB_2-Nb Composite[J].International Journal of Refractory Metals and Hard Materials,2010,28(3):472-474.
    [16]吕珺,郑治祥,金志浩,等.晶须及颗粒增韧氧化铝基陶瓷复合材料的抗热震性能[J].材料工程,2000(12):15-18.
    [17]刘玲,殷宁.晶须增韧复合材料机理的研究[J].材料科学与工程,2000,18(2):116-119.
    [18]Becher P F.Transient Thermal Stress Behavior in ZrO_2-Toughened Al_2O_3[J].Journal of the American Ceramic Society,1981,64(1):37-39.
    [19]Faber K T,Evans A G.Crack Deflection Processes.1.Theory[J].Acta Metallurgica,1983,31(4):565-576.
    [20]Zhang X,Xu L,Du S,et al.Fabrication and Mechanical Properties of ZrB_2-SiC_w Ceramic Matrix Composite[J].Materials letters,2008,62(6):1058-1060.
    [21]李专,肖鹏,熊翔.连续纤维增强陶瓷基复合材料的研究进展[J].粉末冶金材料科学与工程,2007,12(1):13-19.
    [22]Yang F,Zhang X,Han J,et al.Mechanical Properties of Short Carbon Fiber Reinforced ZrB_2-SiC Ceramic Matrix Composites[J].Materials Letters,2008,62(17):2925-2927.
    [23]Lin J,Huang Y,Zhang H,et al.Spark Plasma Sintering of ZrO_2 Fiber Toughened ZrB_2-Based Ultra-High Temperature Ceramics[J].Ceramics International,2015,41(8):10336-10340.
    [24]王振兴,原梅妮,李立州,等.贝壳珍珠母增韧机理研究进展[J].材料导报,2015,29(15):98-102.
    [25]Wei C,Ye C.Mechanical Properties and Thermal Shock Behavior of Bionic Laminated ZrB_2-SiC-G Ceramics[J].International Journal of Refractor)'Metals and Hard Materials,2015,51:233-238.
    [26]Qi Y,Zhang Y S,Hu L T.High-Temperature SelfLubricated Properties of Al_2O_3/Mo Laminated Composites[J].Wear,2012,280:1-4.
    [27]Wei C,Zhang X,Hu P,et al.The Fabrication and Mechanical Properties of Bionic Laminated ZrB_2-SiC/BN Ceramic Prepared by Tape Casting and Hot Pressing[J].Scripla Materialia,2011,65(9):791-794.