循环热处理对CLAM钢晶粒细化的影响

详细信息    查看官网全文

• 英文论文题名：Effect of cycling heat-treatment process on the grain size of the CLAM steel
• 论文作者：李晓林 ; 常永勤 ; 刘昭 ; 张静 ; 万发荣 ; 龙毅
• 英文论文作者：LI Xiao-lin ; CHANG Yong-qin ; LIU Zhao ; ZHANG Jing ; WAN Fa-rong ; LONG Yi ; University of Science and Technology Beijing
• 年：2015
• 作者机构：北京科技大学;
• 论文关键词：CLAM钢 ; 循环热处理 ; 晶粒细化
• 英文论文关键词：CLAM steel ; cycling heat-treatment ; grain refinement
• 会议召开时间：2015-09-21
• 会议录名称：中国核科学技术进展报告（第四卷）——中国核学会2015年学术年会论文集第5册（核材料分卷、辐射防护分卷）
• 语种：中文
• 分类号：TL627
• 学会代码：EGVD
• 会议名称：中国核学会2015年学术年会
• 会议地点：中国四川绵阳
• 主办单位：中国核学会
• 学会名称：中国核学会
• 页数：6
• 文件大小：816k
• 原文格式：O
• 会议级别：全国

摘要

研究了循环热处理方法对CLAM钢晶粒细化的作用。详细地探讨了循环热处理温度、循环次数以及短时保温对CLAM钢晶粒细化效果的影响,发现CLAM钢在960℃以下进行温度递减的循环热处理时,晶粒长大比较缓慢,且相变形核率较高,可得到细小而均匀的晶粒;循环次数为三次时效果最佳;将短时保温作为循环热处理的预处理对细化晶粒有着积极作用。本文最终通过合理地设计循环热处理工艺,成功地将CLAM钢的晶粒尺寸细化了50%,发现CLAM钢循环热处理细化晶粒的作用非常明显,其机制来自于非平衡相变,同时较短时间的保温可控制长大速率。
Cycling heat treatment process was used to refine the grains of the CLAM steels,and the effect of heating temperature,cycle index and pretreatment on the refining grains were investigated.It was found that the grain growth of the CLAM steel is very slow under 960 ℃,and the appropriate cycle index is very important for refining grains.After the reasonable cycling heat treatment process,the grain size of the CLAM steel decreases 50% compared with the initial grain size.The effect of cycling heat treatment on refining grains is from non-equilibrium phase transformation.

引文

[1]Huang L,Hu X,Yang C,et al.Influence of thermal aging on microstructure and mechanical properties of CLAM steel[J].Journal of Nuclear Materials,2013,443(1-3):479-483.
    [2]Gaganidze E,Petersen C,Materna-Morris E,et al.Mechanical properties and TEM examination of RAFM steels irradiated up to 70 dpa in BOR-60[J].Journal of Nuclear Materials,2011,417(1-3):93-98.
    [3]Gaganidze E,Schneider H C,Dafferner B,et al.Embrittlement behavior of neutron irradiated RAFM steels[J].Journal of Nuclear Materials,2007,367-370:81-85.
    [4]Bai X M,Voter A F,Hoagland R G,et al.Efficient annealing of radiation damage near grain boundaries via interstitial emission[J].Science,2010,327(5973):1631-1634.
    [5]Ackland G.Controlling radiation damage[J].Science,2010,327(5973):1587-1588.
    [6]Wang T,Gao T,Zhang P,et al.Influence of a new kind of Al-Ti-C master alloy on the microstructure and mechanical properties of Al-5Cu alloy[J].Journal of Alloys and Compounds,2014,589:19-24.
    [7]何军利,毛小南,张鹏省.循环热处理温度对TC4钛合金组织和力学性能的影响[J].金属热处理,2013,38(02):62-66.
    [8]陈建刚,卢凤双,张敬霖,等.循环热处理对3J33(C)马氏体时效钢组织、性能的影响[J].金属功能材料,2010,17(02):16-19.
    [9]王泾文,周红生.W9Mo3Cr4V钢的超细化处理[J].钢铁研究学报,1999,11(01):24-26.
    [10]朱景川,尹钟大,罗鸿,等.18Ni(200)马氏体时效钢的循环相变晶粒细化新工艺[J].钢铁,2001,36(06):52-55.
    [11]罗文英,蒋静,刘宪民,等.18Ni马氏体时效钢循环相变细晶工艺研究[J].材料热处理技术,2012,41(16):194-196.