基于活性污泥数学模型的污水处理工艺动态模拟

详细信息    查看全文 | 推荐本文 |

英文篇名：Dynamic Simulation of Wastewater Treatment Process Based on Mathematical Model of Activated Sludge 作者：潘东阳 ; 刘静瑞 英文作者：Pan Dong-yang;Liu Jing-rui; 关键词：反应器动力学 ; 活性污泥数学模型 ; 污水处理 ; 动态工艺模拟 英文关键词：reactor kinetics;;activated sludge mathematical model;;wastewater treatment;;dynamic process simulation 中文刊名：化工设计通讯 英文刊名：Chemical Engineering Design Communications 机构：信阳职业技术学院数学与计算机科学学院; 出版日期：2019-04-28 出版单位：化工设计通讯 年：2019 期：04 语种：中文; 页：230-231 页数：2 CN：43-1108/TQ ISSN：1003-6490 分类号：X703

摘要

以反应器动力学原理为基础,借助活性污泥数学模型,对污水处理工艺进行动态模拟实验,为增强实验结果的准确性,采用传统模型处理工艺作为对照。结果表明,基于活性污泥数学模型的污水处理工艺能够有效去除污水中的磷酸盐、氨氮化合物、硝态氮等污染介质,较传统模型处理工艺具有良好的污水处理能力。因此,该模型在污水处理工艺的优化设计与运行中具有较高的实用价值和良好的应用前景。
        Based on the principle of reactor dynamics,the dynamic simulation experiment of sewage treatment process was carried out by means of the mathematical model of activated sludge.In order to enhance the accuracy of the experimental results,the traditional model treatment process was used as a control.The results show that the sewage treatment process based on the mathematical model of activated sludge can effectively remove the contaminated media such as phosphate,ammonia nitrogen compounds and nitrate nitrogen in the sewage,which has better sewage treatment capacity than the traditional model treatment process.Therefore,it can be concluded that the model has high practical value and good application prospect in the optimization design and operation of wastewater treatment process.

引文

[1]杨杰.基于ASM1的污水处理厂计算机模型参数研究[J].天津建设科技,2017,27(4):80-83.
    [2]董姗燕,李咏梅,池春榕,等.基于活性污泥数学模型(ASMs)的污水处理系统不确定性分析研究进展[J].化工进展,2017,36(12):4651-4657.
    [3]池春榕,董姗燕,李齐佳,等.活性污泥数学模型研究进展[J].有色金属科学与工程,2017,8(4):111-117.
    [4]李捷,王宏利,于翔,等.基于模型的MBR工艺模拟及优化[J].给水排水,2017,15(43):139-142.
    [5]苏涛,薄翠梅,黄超.污水处理溶解氧控制器的设计仿真[J].计算机仿真,2017,34(10):291-295.
    [6]陈钰林.乡镇污水处理厂CASS工艺模型验证分析[J].净水技术,2017,59(6):91-99.
    [7]王国胜,尹永远,钟润生,等.活性污泥处理工艺的优化研究[J].广东化工,2018,46(5):159-163.