新型离心机串联模型试验方法及其初步应用研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Study on method of a new centrifugal tandem model test and its preliminary application 作者：李龙起 ; 李昌林 ; 何川 ; 邓小雪 ; 张帅 ; 蒋金阳 英文作者：LI Longqi;LI Changlin;HE Chuan;DENG Xiaoxue;ZHANG Shuai;JIANG Jinyang;State Key Laboratory of Geological Hazard Prevent and Geological Environment Protection,Chengdu University of Technology; 关键词：离心机 ; 串联 ; 模型试验 ; 相似理论 英文关键词：centrifuge;;tandem;;model test;;similarity theory 中文刊名：水利水电技术 英文刊名：Water Resources and Hydropower Engineering 机构：成都理工大学地质灾害防治与地质环境保护国家重点实验室; 出版日期：2019-04-20 出版单位：水利水电技术 年：2019 期：04 基金：国家自然科学基金“资助陡倾顺层斜坡动力失稳机理研究”(41372306);国家自然科学基金“基于非饱和裂隙渗流的软硬相间顺层边坡降雨入渗计算模型及动态稳定评价方法研究”(41502299);; 成都理工大学青年骨干计划(KYGG201720) 语种：中文; 页：203-207 页数：5 CN：11-1757/TV ISSN：1000-0860 分类号：TV223

摘要

为解决以往离心机试验中将大型地质物理模型过渡缩尺时无法与离心加速度相匹配的问题,在综合分析以往离心试验技术的基础上,结合现有离心试验技术的不足,提出新型离心机串联模型试验技术。该技术通过两次量纲变换,即在模型设计阶段,原型地质体经过第一次量纲变换至常规模型试验尺度(m倍),然后经过第二次量纲变换换算至离心模型试验尺度(n倍),将模型缩小至原来的1/mn。第一次变换将模型进行较大尺度的缩减,因此第二次将其变换至离心试验尺度时将具有较大的灵活度,能够适应承载能力较小的离心机模拟高程较大的地质体的工作特征。此技术实现了将天然地质模型缩尺至离心机试验箱内,并结合弱化岩土力学强度的方法,从而解决大尺度地质结构模型模拟中存在的缩尺困难的问题。结合我国西南某水电站边坡开展了初步验证,结果表明,串联试验理论能较好地满足大型离心机模型试验的要求,可再现大型地质体变形破坏的整个过程,该技术较好地解决了蓄水过程中边坡的变形模拟问题。
        In order to solve the problem of that large-scale geophysical model cannot be matched with the centrifugal acceleration during the transition of scale in previous centrifugal model test, a new technology of centrifugal tandem model test is put forward herein in combination with the existing technology of centrifugal model test on the basis of the comprehensive analysis made on the previous technologies of centrifugal model test. For this technology, two times of dimensional transformation are made, i.e. firstly transforming the dimension of the prototypical geological body into the conventional model test dimension(m times), and then transforming into the dimension of the centrifugal model test(n times) through the secondary dimension transformation, thus reducing the model into 1/mn of the original one. During the first transformation, the model is reduced with a larger scale, and then a larger flexibility is obtained during transforming it into the scale for the centrifugal model test when the secondary transformation, which can adapt the working characteristics of simulating the geological body of larger elevation with the centrifuge with smaller bearing capacity. This technology realizes to reduce the scale of the natural geological model into the centrifuge test box and then solve the problem from the difficulty of reduced-scale in the simulation of the large-scale geological structure model in combination with the method of weakening strength of geotechnical mechanics. A preliminary verification is carried out according to the slope of a hydropower station in Southwest China. The result shows that the theory of the tandem model test can better meet the requirement of the large-scale centrifugal model test and reproduce the whole process of the failure caused by the deformation of large-sized geological body, thus satisfactorily solve the problem of the simulation on the slope deformation during reservoir impoundment.

引文

[1] 张倬元,王士天,王兰生.工程地质分析原理[M].北京:地质出版社,2009.
    [2] 李祥龙,唐辉明.逆层岩质边坡地震动力破坏离心机试验研究[J].岩土工程学报,2014,36(4):687- 694.
    [3] 李安洪,周德培,冯君.顺层岩质路堑边坡破坏模式及设计对策[J].岩石力学与工程学报,2009,28(增刊1):2915- 2921.
    [4] 董金玉,杨国香,伍法权,等.地震作用下顺层岩质边坡动力响应和破坏模式大型振动台试验研究[J].岩土力学,2011,32(10):2977- 2982.
    [5] 刘晶波,赵冬冬,王文晖.土-结构动力离心试验模型材料研究与相似关系设计[J].岩石力学与工程学报,2012,31(1):3181- 3187.
    [6] SUN L X.Centrifuge modeling and finite element analysis of pipeline buried in liquefiable soil[D].New York,USA:Columbia University,2001.
    [7] ADALIER K,ABDOUN T,DOBRY R,et al.Centrifuge modeling for seismic retrofit design of an immersed tube tunnel[J].International Journal of Physical Modelling in Geotechnics,2003,3(2):23- 35.
    [8] 李荣建,闫蕊,刘军定,等.土工动力离心模型试验中物理破坏模拟比较及关键问题[J].地震工程学报,2014,36(3):718- 726.
    [9] LEE C J.Centrifuge modeling of the behavior of caisson-type quay walls during earthquakes[J].Soil Dynamics and Earth-quake Engineering,2005,25(2):117- 13.