Effects of nanotopography on the in vitro hemocompatibility of nanocrystalline diamond coatings

详细信息    查看全文

• 作者：Shelby A. Skoog ; Qijin Lu ; Richard A. Malinauskas ; Anirudha V. Sumant ; Jiwen Zheng ; Peter L. Goering ; Roger J. Narayan and Brendan J. Casey
• 刊名：Journal of Biomedical Materials Research Part A
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：105
• 期：1
• 页码：253-264
• 全文大小：680K
• ISSN：1552-4965

文摘

Nanocrystalline diamond (NCD) coatings have been investigated for improved wear resistance and enhanced hemocompatibility of cardiovascular devices. The goal of this study was to evaluate the effects of NCD surface nanotopography on in vitro hemocompatibility. NCD coatings with small (NCD-S) and large (NCD-L) grain sizes were deposited using microwave plasma chemical vapor deposition and characterized using scanning electron microscopy, atomic force microscopy, contact angle testing, and Raman spectroscopy. NCD-S coatings exhibited average grain sizes of 50–80 nm (RMS 5.8 nm), while NCD-L coatings exhibited average grain sizes of 200–280 nm (RMS 23.1 nm). In vitro hemocompatibility testing using human blood included protein adsorption, hemolysis, nonactivated partial thromboplastin time, platelet adhesion, and platelet activation. Both NCD coatings demonstrated low protein adsorption, a nonhemolytic response, and minimal activation of the plasma coagulation cascade. Furthermore, the NCD coatings exhibited low thrombogenicity with minimal platelet adhesion and aggregation, and similar morphological changes to surface-bound platelets (i.e., activation) in comparison to the HDPE negative control material. For all assays, there were no significant differences in the blood–material interactions of NCD-S versus NCD-L. The two tested NCD coatings, regardless of nanotopography, had similar hemocompatibility profiles compared to the negative control material (HDPE) and should be further evaluated for use in blood-contacting medical devices.