A Full Vacuum Approach for the Fabrication of Hybrid White-Light-Emitting Thin Films and Wide-Range In Situ Tunable Luminescent Microcavities
详细信息 查看全文
- 作者：Youssef Oulad-Zian ; Juan Ramon Sanchez-Valencia ; Manuel Oliva ; Julian Parra-Barranco ; Maria Alcaire ; Francisco J. Aparicio ; Ana Mora-Boza ; Juan Pedro Espinos ; Francisco Yubero ; Agustin R. Gonzalez-Elipe ; Angel Barranco and Ana Borras
- 刊名：Advanced Optical Materials
- 出版年：2016
- 出版时间：July 2016
- 年：2016
- 卷：4
- 期：7
- 页码：1124-1131
- 全文大小：2961K
- ISSN：2195-1071
文摘
This study shows the fabrication by a dry approach at mild temperature (<150 °C) of a photoluminescence white light emitting hybrid layer. The white light emitter is obtained by evaporation of two photoluminescent small molecules, a blue (1,3,5-triphenyl-2-pyrazoline (TPP)) and an orange (Rubrene) dye within the porous of an SiO2 host film fabricated by glancing angle deposition. Fluorescence (Föster) resonant energy transfer between the two organic dyes allows the emission of the combined system upon excitation of the TPP molecule at wavelength of 365 nm. The distribution of the organic molecule within the host layer is analyzed as a function of the substrate temperature and vacuum conditions and the required conditions for the white emission determined by finely controlling the TPP:Rubrene ratio. The full vacuum processing of the hybrid layers provides a straightforward route for the incorporation of the white light emitters as optical defect within 1D Bragg microcavities. As a consequence, directional emission of the system is achieved which allows the development of wide-range in situ tunable photoluminescent devices.