Morphological Characteristics of Nanostructured Surface Using Anodic Aluminum Template
详细信息 查看全文
- 作者：Hsin-chung Cheng ; Chiung-fang Huang ; Jeou-long Lee ; Yi Lin and Yung-kang Shen
- 关键词：Anodic aluminum oxide ; Antireflectance ; Molding ; Nanostructure ; Polycarbonates
- 刊名：Advances in Polymer Technology
- 出版年：2016
- 出版时间：Summer 2016
- 年：2016
- 卷：35
- 期：2
- 页码：152-161
- 全文大小：2226K
- ISSN：1098-2329
文摘
Nanoporous anodic aluminum oxide (AAO) templates are fabricated using an anodization method. The mean diameter of the nanoporous AAO templates is 100 nm. A molded plastic thin film with nanostructure is fabricated using AAO template as a mold insert by nanoimprint. The surface properties of the molded plastic thin film obtained using various processing parameters in nanoimprint are discussed. The contact angle of the molded polycarbonate (PC) thin film with the nanostructure exceeds that without the nanostructure. The molded PC thin film (with nanostructure) with a hydrophobic surface is formed and has a water contact angle of 128.5°. The use of AAO to prepare a mold insert for nanoimprint supports the formation of a nanostructure in the molded PC thin film and effectively increases its antireflectance.