Vapor deposition polymerization of vinyl compounds and fabrication of OLED having double emissive layers
详细信息 查看全文
- 作者：Eiji Otsuki ; Hisaya Sato ; Akira Kawakami ; Hideo Taka ; Hiroshi Kita ; Hiroaki Usui
- 关键词：OLED ; Organic ; EL deposition ; Polymerization ; Multilayer ; White emission ; Phosphorescece
- 刊名：Thin Solid Films
- 出版年：2009
- 出版时间：30 November 2009
- 年：2009
- 卷：518
- 期：2
- 页码：703-706
- 全文大小：343 K
文摘
Physical vapor deposition polymerization was achieved by evaporating vinyl monomers followed by heat treatment. This technique was utilized for preparing a hole-transport layer (HTL) and emissive layers (EMLs) of organic light emitting diodes (OLEDs). Adivinyl derivative of tetraphenyldiaminobiphenyl, DvTPD, was used both for the HTL and for the host material of red phosphorescent EML. A vinyl derivative of bis(N-carbazolyl)benzene, vmCP, was used for the host material of blue phosphorescent EML. The ELMs were doped with red or blue-emitting phosphorescent iridium complexes modified with styril units. After characterizing the devices that have single EML of red or blue emission, an OLED having multilayered ELM was prepared by stacking these layers to achieve quasi-white emission. It was found that the deposition polymerization was effective to improve the emission efficiency. The improvement appeared to be related to the proper carrier balance in the EML.