Study of the crystallization kinetics of LAS glass by differential scanning calorimetry, X-ray diffraction, and beam bending viscometry

详细信息    查看全文

• 作者：D. Ovono Ovono ; S. Berre ; P. Pradeau ; M. Comte ; G. Bruno ; ^{brunog@corning.com}
• 关键词：Lithium-alumino-silicates ; Isoconversional and non-isothermal condition ; Crystallization ; Differential scanning calorimetry ; Beam bending viscometry ; X-ray diffraction ; In situ techniques
• 刊名：Thermochimica Acta
• 出版年：2012
• 出版时间：10 January, 2012
• 年：2012
• 卷：527
• 期：Complete
• 页码：158-164
• 全文大小：882 K

文摘

The crystallization kinetics of a commercial lithium-aluminum silicate (LAS) glass were characterized by differential scanning calorimetry (DSC) under non-isothermal conditions, by in-situ X-ray diffraction, and by three point beam bending viscosimeter (BBV). Non-isothermal DSC experiments were conducted at different heating rates. Results show that the crystal growth is controlled by a thermally activated process of the Arrhenius type. The activation energies obtained from isoconversional analysis are close to that extracted using the Johnson-Mehl-Avrami equation. While X-ray diffraction volume fraction data confirm the DSC analysis, it also shows that the crystallite size changes only at the end of the heat treatment protocol, during a hold at temperatures as high as 1000 ¡ãC. In this latter case, the crystal growth follows the Ostwald ripening mechanism. Finally, the viscosity measured in the crystallization region by BBV provides the activation energy for viscous flow, and it is slightly higher than the values obtained by DSC.