The coefficient of friction of UHMWPE along an entire walking cycle using a ball-on-disc tribometer under arthrokinematics and loading conditions prescribed by ISO 14243-3:2014
详细信息 查看全文
- 作者：J.D.O. Barceinas-Sanchez ; obarceinas@ipn.mx ; M. Alvarez-Vera ; L.A. Montoya-Santiyanes ; I. Dominguez-Lopez ; A.L. Garcia-Garcia
- 关键词：UHMWPE ; ISO standard ; Coefficient of friction ; Sliding/rolling ; Walking cycle ; Ball-on-disc
- 刊名：Journal of the Mechanical Behavior of Biomedical Materials
- 出版年：2017
- 出版时间：January 2017
- 年：2017
- 卷：65
- 期：Complete
- 页码：274-280
- 全文大小：1199 K
- 卷排序：65
文摘
The observation of tribological phenomena occurring in total knee replacement (TKR) simulators may be obscured by the intrinsic complexity of their operation: the dynamics and kinematics prescribed by the ISO 14243-3:2014 standard, and the geometry of the surfaces involved. On the other hand, evaluating the individual performance of the tribosystem elements may be carried out in simpler apparatuses. An experimental method is presented here, by means of which the arthrokinematics and loading conditions prescribed by the said standard are adapted to a ball-on-disc configuration in order to observe the behavior of the coefficient of friction along an entire walking cycle, using the contact point of an AISI 316L stainless steel ball rolling/sliding on an ultra-high molecular weight polyethylene (UHMWPE) disc, lubricated by a solution of fetal bovine serum, at 37 °C. The method was tried on two different testing fluids prepared with protein concentrations of 20 g/L, according to the said standard, and 36 g/L, as received. The statistical model obtained for the behavior of the COF during the entire walking cycle may be used in numerical simulations of UHMWPE wear, under the conditions established by ISO 14243-3:2014.